| Age | Commit message (Collapse) | Author |
|
Some places calculate the origin_call by checking if
BPF_TRAMP_F_SKIP_FRAME is set. However, it should use
BPF_TRAMP_F_ORIG_STACK for this propose. Just fix them.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20251118123639.688444-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
- dm-pcache fixes
- fix a regression with empty flush bios
- dm-verity: fix unreliable memory allocation with GFP_NOWAIT
* tag 'for-6.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: fix unreliable memory allocation
dm: fix failure when empty flush's bi_sector points beyond the device end
dm-pcache: zero cache_info before default init
dm-pcache: reuse meta_addr in pcache_meta_find_latest
dm-pcache: allow built-in build and rename flush helper
|
|
Implement the DYNAMIC_FTRACE_WITH_JMP for x86_64. In ftrace_call_replace,
we will use JMP32_INSN_OPCODE instead of CALL_INSN_OPCODE if the address
should use "jmp".
Meanwhile, adjust the direct call in the ftrace_regs_caller. The RSB is
balanced in the "jmp" mode. Take the function "foo" for example:
original_caller:
call foo -> foo:
call fentry -> fentry:
[do ftrace callbacks ]
move tramp_addr to stack
RET -> tramp_addr
tramp_addr:
[..]
call foo_body -> foo_body:
[..]
RET -> back to tramp_addr
[..]
RET -> back to original_caller
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20251118123639.688444-3-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For now, the "nop" will be replaced with a "call" instruction when a
function is hooked by the ftrace. However, sometimes the "call" can break
the RSB and introduce extra overhead. Therefore, introduce the flag
FTRACE_OPS_FL_JMP, which indicate that the ftrace_ops should be called
with a "jmp" instead of "call". For now, it is only used by the direct
call case.
When a direct ftrace_ops is marked with FTRACE_OPS_FL_JMP, the last bit of
the ops->direct_call will be set to 1. Therefore, we can tell if we should
use "jmp" for the callback in ftrace_call_replace().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20251118123639.688444-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In commit b4ce5923e780 ("bpf, x86: add new map type: instructions array")
env->used_map was copied to func[i]->aux->used_maps before jitting.
Clear these fields out after jitting such that pointer to freed memory
(env->used_maps is freed later) are not kept in a live data structure.
The reason why the copies were initially added is explained in
https://lore.kernel.org/bpf/20251105090410.1250500-1-a.s.protopopov@gmail.com
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Fixes: b4ce5923e780 ("bpf, x86: add new map type: instructions array")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20251124151515.2543403-1-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
v1:
- make pp_table invisible on VF mode (only valid on BM)
- make pp_table invisible on Mi* chips (Not supported)
- make pp_table invisible if scpm feature is enabled.
v2:
move pp_table invisible code logic into amdgpu_dpm_get_pp_table() function.
v3:
add table buffer pointer check both on powerplay & swsmu.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The original patch introduced additional latency during boot time
because it triggers a driver reload to avoid a CP hang when the driver
is reloaded multiple times. This has been addressed with a more generic
solution that triggers the GPU reset only during the unload phase,
avoiding extra latency during boot time. For this reason, this commit
reverts the original change.
This reverts commit 72a98763b473890e6605604bfcaf71fc212b4720.
This patch should only be applied if commit:
4355e61835e7 ("drm/amdgpu: Fix GFX hang on SteamDeck when amdgpu is reloaded")
is present.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When trying to unload amdgpu in the SteamDeck (TTY mode), the following
set of errors happens and the system gets unstable:
[..]
[drm] Initialized amdgpu 3.64.0 for 0000:04:00.0 on minor 0
amdgpu 0000:04:00.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on gfx_0.0.0 (-110).
amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[..]
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
amdgpu 0000:04:00.0: amdgpu: SMU: I'm not done with your previous command: SMN_C2PMSG_66:0x0000001E SMN_C2PMSG_82:0x00000000
amdgpu 0000:04:00.0: amdgpu: Failed to disable gfxoff!
[..]
When the driver initializes the GPU, the PSP validates all the firmware
loaded, and after that, it is not possible to load any other firmware
unless the device is reset. What is happening in the load/unload
situation is that PSP halts the GC engine because it suspects that
something is amiss. To address this issue, this commit ensures that the
GPU is reset (mode 2 reset) in the unload sequence.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1:
- fix amdgpu_irq enabled counter unbalanced issue on smu_v11_0_disable_thermal_alert.
v2:
- re-enable smu thermal alert to make amdgpu irq counter balance for smu v11.0 if in runpm state
[75582.361561] ------------[ cut here ]------------
[75582.361565] WARNING: CPU: 42 PID: 533 at drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:639 amdgpu_irq_put+0xd8/0xf0 [amdgpu]
...
[75582.362211] Tainted: [E]=UNSIGNED_MODULE
[75582.362214] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F14a 08/14/2020
[75582.362218] Workqueue: pm pm_runtime_work
[75582.362225] RIP: 0010:amdgpu_irq_put+0xd8/0xf0 [amdgpu]
[75582.362556] Code: 31 f6 31 ff e9 c9 bf cf c2 44 89 f2 4c 89 e6 4c 89 ef e8 db fc ff ff 5b 41 5c 41 5d 41 5e 5d 31 d2 31 f6 31 ff e9 a8 bf cf c2 <0f> 0b eb c3 b8 fe ff ff ff eb 97 e9 84 e8 8b 00 0f 1f 84 00 00 00
[75582.362560] RSP: 0018:ffffd50d51297b80 EFLAGS: 00010246
[75582.362564] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[75582.362568] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[75582.362570] RBP: ffffd50d51297ba0 R08: 0000000000000000 R09: 0000000000000000
[75582.362573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8e72091d2008
[75582.362576] R13: ffff8e720af80000 R14: 0000000000000000 R15: ffff8e720af80000
[75582.362579] FS: 0000000000000000(0000) GS:ffff8e9158262000(0000) knlGS:0000000000000000
[75582.362582] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75582.362585] CR2: 000074869d040c14 CR3: 0000001e37a3e000 CR4: 00000000003506f0
[75582.362588] Call Trace:
[75582.362591] <TASK>
[75582.362597] smu_v11_0_disable_thermal_alert+0x17/0x30 [amdgpu]
[75582.362983] smu_smc_hw_cleanup+0x79/0x4f0 [amdgpu]
[75582.363375] smu_suspend+0x92/0x110 [amdgpu]
[75582.363762] ? gfx_v10_0_hw_fini+0xd5/0x150 [amdgpu]
[75582.364098] amdgpu_ip_block_suspend+0x27/0x80 [amdgpu]
[75582.364377] ? timer_delete_sync+0x10/0x20
[75582.364384] amdgpu_device_ip_suspend_phase2+0x190/0x450 [amdgpu]
[75582.364665] amdgpu_device_suspend+0x1ae/0x2f0 [amdgpu]
[75582.364948] amdgpu_pmops_runtime_suspend+0xf3/0x1f0 [amdgpu]
[75582.365230] pci_pm_runtime_suspend+0x6d/0x1f0
[75582.365237] ? __pfx_pci_pm_runtime_suspend+0x10/0x10
[75582.365242] __rpm_callback+0x4c/0x190
[75582.365246] ? srso_return_thunk+0x5/0x5f
[75582.365252] ? srso_return_thunk+0x5/0x5f
[75582.365256] ? ktime_get_mono_fast_ns+0x43/0xe0
[75582.365263] rpm_callback+0x6e/0x80
[75582.365267] rpm_suspend+0x124/0x5f0
[75582.365271] ? srso_return_thunk+0x5/0x5f
[75582.365275] ? __schedule+0x439/0x15e0
[75582.365281] ? srso_return_thunk+0x5/0x5f
[75582.365285] ? __queue_delayed_work+0xb8/0x180
[75582.365293] pm_runtime_work+0xc6/0xe0
[75582.365297] process_one_work+0x1a1/0x3f0
[75582.365303] worker_thread+0x2ba/0x3d0
[75582.365309] kthread+0x107/0x220
[75582.365313] ? __pfx_worker_thread+0x10/0x10
[75582.365318] ? __pfx_kthread+0x10/0x10
[75582.365323] ret_from_fork+0xa2/0x120
[75582.365328] ? __pfx_kthread+0x10/0x10
[75582.365332] ret_from_fork_asm+0x1a/0x30
[75582.365343] </TASK>
[75582.365345] ---[ end trace 0000000000000000 ]---
[75582.365350] amdgpu 0000:05:00.0: amdgpu: Fail to disable thermal alert!
[75582.365379] amdgpu 0000:05:00.0: amdgpu: suspend of IP block <smu> failed -22
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reserve vm invalidation engine 6 when uni_mes enabled. It
is used in processing tlb flush request from host.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shaoyun liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
btrfs_convert_free_space_to_bitmaps() and
btrfs_convert_free_space_to_extents() both allocate a bitmap struct
with:
bitmap_size = free_space_bitmap_size(fs_info, block_group->length);
bitmap = alloc_bitmap(bitmap_size);
if (!bitmap) {
ret = -ENOMEM;
btrfs_abort_transaction(trans);
return ret;
}
This conversion is done based on a heuristic and the check triggers each
time we call update_free_space_extent_count() on a block group (each
time we add/remove an extent or modify a bitmap). Furthermore, nothing
relies on maintaining some invariant of bitmap density, it's just an
optimization for space usage. Therefore, it is safe to simply ignore
any memory allocation errors that occur, rather than aborting the
transaction and leaving the fs read only.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After (checks watch) a little over two years I finally investigated the
boot warning on my Thinkpad X13s and it was caused by the conservative
timings warning in panel-edp.c . The X13s was sold with a variety of
different panel versions; I have the 300 nit multi-touch variant.
I have been unable to secure panel documentation so the I copied the
timings from NV133WUM-N63.
The raw EDID is:
00 ff ff ff ff ff ff 00 09 e5 84 0a 00 00 00 00
1e 1f 01 04 a5 1d 12 78 03 5c 70 a6 51 4c 9c 26
0e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 74 3c 80 a0 70 b0 28 40 30 20
36 00 1e b3 10 00 00 1a 00 00 00 fd 00 28 3c 4b
4b 10 01 0a 20 20 20 20 20 20 00 00 00 fe 00 42
4f 45 20 48 46 0a 20 20 20 20 20 20 00 00 00 fe
00 4e 56 31 33 33 57 55 4d 2d 54 30 31 0a 00 51
Signed-off-by: Daniel Thompson <daniel@riscstar.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251121-x13s-touchscreen-loopup-v2-1-75b03838e28f@riscstar.com
|
|
correctly check the ENODEV return value.
Fixes: 810b790033cc ("nvmem: layouts: fix automatic module loading")
CC: stable@vger.kernel.org
Co-developed-by: WangYuli <wangyl5933@chinaunicom.cn>
Signed-off-by: WangYuli <wangyl5933@chinaunicom.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110539.143154-1-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add all TUXEDO devices that can make use of this driver.
For the time being just the input part of the driver is used for these
devies. Other features will follow once implemented and/or tested.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20251120215240.436835-3-wse@tuxedocomputers.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Handle more WMI events that are triggered on TUXEDO devices.
Testing the TUXEDO InfinityBook Pro 15 Gen9 Intel, the Stellaris 16 Gen5
Intel, the Stellaris 16 Gen5 AMD and going through the out of tree
tuxedo-drivers dkms package I identified more WMI events that are used by
Uniwill.
This patch binds them to their respective function, or marks them as
KE_IGNORE when they are send in addition to other actions, to make clear
that they don't need special handling. This also avoids warnings in dmesg.
The events with descriptions from memory:
UNIWILL_OSD_RADIOON and UNIWILL_OSD_RADIOOFF - Sent in addition to the
already handled UNIWILL_OSD_RFKILL on some devices.
UNIWILL_OSD_PERFORMANCE_MODE_TOGGLE - Physical button on some devices. Bind
it to a button so userspace can receive the keypress and do stuff with it.
UNIWILL_OSD_MUTE - Sent in addition to an already handled keypress.
UNIWILL_OSD_KB_LED_LEVEL0 - UNIWILL_OSD_KB_LED_LEVEL4 - Some devices sent
these instead of UNIWILL_OSD_KBDILLUMTOGGLE.
UNIWILL_OSD_WEBCAM_TOGGLE - Sent in addition to deactivating the Webcam on
firmware level.
UNIWILL_OSD_DC_ADAPTER_CHANGED - No special handling required here atm, but
will be for the charging priority feature.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251120215240.436835-2-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add OCOTP device type for i.MX94, including register offset, total size,
and fuse layout. This enables NVMEM access to the eFuse of i.MX94.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-9-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the compatible string "fsl,imx94-ocotp" to the imx-ocotp device tree
binding documentation to support the i.MX94.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-8-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Node names are already and properly checked by the core schema. No need
to do it again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-7-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add compatible string for the eFuse layout on MT8189 SoC, that is
compatible with MT8186.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-6-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some devices reserve a larger NVMEM region for the U-Boot environment
than the actual environment data length used by U-Boot itself. The CRC32
in the U-Boot header is calculated over the smaller data length, causing
CRC validation to fail when Linux reads the full partition.
Allow an optional device tree property "env-size" to specify the
environment data size to use for CRC computation.
v2: add missing $ref line to DT binding
Signed-off-by: Jascha Sundaresan <flizarthanon@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The qnap-mcu also has an eeprom connected to it, that contains some
specific product-information like the mac addresses for the network
interfaces.
Add a nvmem driver for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
add compatible string for mt8189 evb board dts node of efuse
Signed-off-by: Jack Hsu <jh.hsu@mediatek.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document compatible string for the QFPROM on Lemans platform.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This ensures that the keyboard backlight state is restored after
a suspend-resume cycle. Otherwise the keyboard is automatically
disabled during suspend and then stays disabled after resume.
Note, that this adopts the same behavior as the existing Thinkpad
ACPI driver.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://patch.msgid.link/20251119-thinkpad-t14s-ec-improvements-v2-4-441219857c02@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Improve support for system suspend. The register information has been
extracted from the ACPI DSDT code handling Windows Modern Standby. I
took over the weird multi-write function from the ACPI DSDT code where
it is called ECWS.
In addition to writing to the 0xE0 register, the ACPI Windows Modern
Standby code also does some changes to the thermal configuration. This
part is not implemented.
After this patch the laptop's power and LID LEDs will switch into the
typical breathing animation when the system is suspended and enabled
normally again after resuming.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://patch.msgid.link/20251119-thinkpad-t14s-ec-improvements-v2-3-441219857c02@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
devm_pm_runtime_enable() can fail due to memory allocation.
The current code ignores its return value, potentially causing
pm_runtime_resume_and_get() to operate on uninitialized runtime
PM state.
Check the return value of devm_pm_runtime_enable() and return on failure.
Fixes: 3e6e14ffdea4 ("usb: gadget: udc: add Renesas RZ/N1 USBF controller support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251124022215.1619-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In arm_smmu_alloc_cd_tables(), the error check following the
dma_alloc_coherent() for cd_table->l2.l1tab incorrectly tests
cd_table->l2.l2ptrs.
This means an allocation failure for l1tab goes undetected, causing
the function to return 0 (success) erroneously.
Correct the check to test cd_table->l2.l1tab.
Fixes: e3b1be2e73db ("iommu/arm-smmu-v3: Reorganize struct arm_smmu_ctx_desc_cfg")
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Ryan Huang <tzukui@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Some IOMMUs on some platforms (there doesn't seem to be a good denominator
for this) require the presence of a third clock, specifically relating
to the instance's Translation Buffer Unit (TBU).
Stephan Gerhold noted [1] that according to Qualcomm Snapdragon 410E
Processor (APQ8016E) Technical Reference Manual, SMMU chapter, section
"8.8.3.1.2 Clock gating", which reads:
For APPS TCU/TBU (TBU to TCU interface is asynchronous)
Software should turn ON clock to APPS TCU
- During APPS TCU register programming sequence
For GPU TCU/TBU (TBU to TCU interface is synchronous)
Software should turn ON clock to GPU TBU
- During GPU TLB invalidation sequence <=====================
Software should turn ON clock to GPU TCU
- During GPU TCU register programming sequence
- While GPU master clock is Active
The clock should be turned on at least during TLB invalidation on the
GPU SMMU instance. This is corroborated by Commit 5bc1cf1466f6
("iommu/qcom: add optional 'tbu' clock for TLB invalidate").
This is also not to be confused with qcom,sdm845-tbu, which is a
description of a debug interface, absent on the generation of hardware
that this binding describes.
Allow this clock.
[1] https://lore.kernel.org/linux-arm-msm/aPX_cKtial56AgvU@linaro.org/
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for the transparent ASL CS5263 DP-to-HDMI bridge.
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-4-ggo@tuxedocomputers.com
|
|
The ASL CS5263 is a high-performance DP1.4 to HDMI2.0b converter,
designed to connect a DP1.4 source to an HDMI2.0b sink. The CS5263AN
integrates a DP1.4 compliant receiver, and a HDMI2.0b compliant
transmitter.
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-3-ggo@tuxedocomputers.com
|
|
ASL Xiamen Technology Co. Ltd. is a Chinese high-speed interface and
display system chip design company. Adding it to the vendor prefixes.
Link: https://www.asl-tek.com/
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-2-ggo@tuxedocomputers.com
|
|
Check the return values of send_control() and send_line_coding() during
device initialization in gb_uart_probe(). If these operations fail, the
device will be left in an inconsistent state, so propagate the error to
properly fail the probe.
Both functions call gb_operation_sync() which can fail with errors such
as -ENOMEM, -ENODEV, or -ETIMEDOUT. Ignoring these errors means the TTY
device would be registered despite incomplete initialization.
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://patch.msgid.link/20251115061646.160847-2-nirbhay.lkd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fbtft_probe_common() allocates a memory chunk for "info" with
fbtft_framebuffer_alloc(). When "display->buswidth == 0" is true, the
function returns without releasing the "info", which will lead to a
memory leak.
Fix it by calling fbtft_framebuffer_release() when "display->buswidth
== 0" is true.
Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20251112192235.2088654-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the gpib drivers out of staging and into the "real" part of the
kernel. This entails:
- Remove the gpib Kconfig menu and Makefile build rule from staging.
- Remove gpib/uapi from the header file search path in subdir-ccflags
of the gpib Makefile
- move the gpib/uapi files to include/uapi/linux
- Move the gpib tree out of staging to drivers.
- Remove the word "Linux" from the gpib Kconfig file.
- Add the gpib Kconfig menu and Makefile build rule to drivers
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://patch.msgid.link/20251117144021.23569-5-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As part destaging the gpib drivers we need to add the
WITH Linux-syscall-note to the SPDX license in the gpib
common includes as these will be part of the kernel headers.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://patch.msgid.link/20251117144021.23569-4-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comments have now been fixed so remove the item about
comments from the TODO file.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://patch.msgid.link/20251117144021.23569-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A ppc64 randconfig build complained about the // comments in the uapi
header file:
error: // comments are not allowed in this language [-Werror,-Wcomment]
Change the // comments to /* */ format.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511141203.sbp27oAR-lkp@intel.com/
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://patch.msgid.link/20251117144021.23569-2-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix this warning that was generated from "make htmldocs":
WARNING: drivers/firmware/stratix10-svc.c:58 struct member 'intel_svc_fcs'
not described in 'stratix10_svc'
Fixes: e6281c26674e ("firmware: stratix10-svc: Add support for FCS")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251106145941.37920e97@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Stephen Rothwell reports htmldocs warnings when merging char-misc tree:
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:22 This comment
starts with '/**', but isn't a kernel-doc comment.
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:184 Enum value
'COMMAND_HWMON_READTEMP' not described in enum 'stratix10_svc_command_code'
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:184 Enum value
'COMMAND_HWMON_READVOLT' not described in enum 'stratix10_svc_command_code'
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:307 function
parameter 'cb_arg' not described in 'async_callback_t'
Fixes: 4f49088c1625 ("firmware: stratix10-svc: Add definition for voltage and temperature sensor")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251114153920.1c5df700@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-3-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Stephen Rothwell reports htmldocs warnings when merging char-misc tree:
WARNING: drivers/firmware/stratix10-svc.c:58 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Total number of transaction IDs, which is a combination of
WARNING: drivers/firmware/stratix10-svc.c:302 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* svc_mem_lock protects access to the svc_data_mem list for
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251114153347.16001109@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch series introduces support for `syn` (and its dependencies):
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
It is the most downloaded Rust crate (according to crates.io), and it
is also used by the Rust compiler itself. Having such support allows to
greatly simplify writing complex macros such as `pin-init`. We will use
it in the `macros` crate too.
Benno has already prepared the `pin-init` version based on this, and on
top of that, we will be able to simplify the `macros` crate too. I think
Jesung is working on updating the `TryFrom` and `Into` upcoming derive
macros to use `syn` too.
The series starts with a few preparation commits (two fixes were already
merged in mainline that were discovered by this series), then each crate
is added. Finally, support for using the new crates from our `macros`
crate is introduced.
This has been a long time coming, e.g. even before Rust for Linux was
merged into the Linux kernel, Gary and Benno have wanted to use `syn`.
The first iterations of this, from 2022 and 2023 (with `serde` too,
another popular crate), are at:
https://github.com/Rust-for-Linux/linux/pull/910
https://github.com/Rust-for-Linux/linux/pull/1007
After those, we considered picking these from the distributions where
possible. However, after discussing it, it is not really worth the
complexity: vendoring makes things less complex and is less fragile.
In particular, we avoid having to support and test several versions,
we avoid having to introduce Cargo just to properly fetch the right
versions from the registry, we can easily customize the crates if needed
(e.g. dropping the `unicode_idents` dependency like it is done in this
series) and we simplify the configuration of the build for users for
which the "default" paths/registries would not have worked.
Moreover, nowadays, the ~57k lines introduced are not that much compared
to years ago (it dwarfed the actual Rust kernel code). Moreover, back
then it wasn't clear the Rust experiment would be a success, so it would
have been a bit pointless/risky to add many lines for nothing. Our macro
needs were also smaller in the early days.
So, finally, in Kangrejos 2025 we discussed going with the original,
simpler approach. Thus here it is the result.
There should not be many updates needed for these, and even if there
are, they should not be too big, e.g. +7k -3k lines across the 3 crates
in the last year.
Note that `syn` does not have all the features enabled, since we do not
need them so far, but they can easily be enabled just adding them to the
list.
Link: https://patch.msgid.link/20251124151837.2184382-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.19
This pull request contains the interconnect changes for the 6.19-rc1
merge window. The core and driver changes are listed below.
Core changes:
- kbps_to_icc() macro optimization
Driver changes:
- Switch all Qualcomm RPMh interconnect drivers to use the dynamic
node IDs and drop support for non-dynamic ID allocation
- Add new driver and BWMON support for the Kaanapali SoC
- Add QoS support for the SM6350 SoC
- Add QoS support for the SA8775p SoC
- Fix missing link from SNOC_PNOC to the USB 2 on MSM8996 SoC that
includes also a dts change that has been acked by the maintainer
- Drop the QPIC interconnect and BCM nodes for the SDX75 SoC, as these
should be handled by the rpmh-clk driver
- Other misc fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (40 commits)
interconnect: qcom: sm6350: enable QoS configuration
interconnect: qcom: sm6350: Remove empty BCM arrays
interconnect: qcom: icc-rpmh: Get parent's regmap for nested NoCs
dt-bindings: interconnect: qcom,sm6350-rpmh: Add clocks for QoS
dt-bindings: interconnect: qcom-bwmon: Document Kaanapali BWMONs
interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS
interconnect: qcom: sm8750: convert to dynamic IDs
interconnect: qcom: sm8650: convert to dynamic IDs
interconnect: qcom: sm8550: convert to dynamic IDs
interconnect: qcom: sm8450: convert to dynamic IDs
interconnect: qcom: sm8350: convert to dynamic IDs
interconnect: qcom: sm8150: convert to dynamic IDs
interconnect: qcom: sm7150: convert to dynamic IDs
interconnect: qcom: sm6350: convert to dynamic IDs
interconnect: qcom: sdx75: convert to dynamic IDs
interconnect: qcom: sdx65: convert to dynamic IDs
interconnect: qcom: sdx55: convert to dynamic IDs
interconnect: qcom: sdm670: convert to dynamic IDs
interconnect: qcom: sc7180: convert to dynamic IDs
interconnect: qcom: sar2130p: convert to dynamic IDs
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: Updates for Linux v6.19
The changes for Linux v6.19 include :
- Support for static TPDM
- Fixes to TMC-ETR with CATU where buffer wasn't available to CATU in perf mode
- Clean ups to the component operations to accept coresight_path
- Fixes to the ETM4x/ETM3x driver
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: Remove the state_needs_restore flag
coresight: etm4x: Remove the redundant DSB
coresight: etm4x: Properly control filter in CPU idle with FEAT_TRF
coresight: etm4x: Add context synchronization before enabling trace
coresight: etm4x: Correct polling IDLE bit
coresight: etm3x: Always set tracer's device mode on target CPU
coresight: etm4x: Always set tracer's device mode on target CPU
coresight: Change device mode to atomic type
coresight: change the sink_ops to accept coresight_path
coresight: change helper_ops to accept coresight_path
coresight: tmc: add the handle of the event to the path
coresight: tpdm: remove redundant check for drvdata
coresight: tpdm: add static tpdm support
dt-bindings: arm: document the static TPDM compatible
coresight: ETR: Fix ETR buffer use-after-free issue
|
|
One of the two main uses cases for adding `proc-macro2`, `quote` and
`syn` is the `macros` crates (and the other `pin-init`).
Thus add the support for the crates in `macros` already.
Tested-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20251124151837.2184382-21-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
With all the new files in place and ready from the new crate, enable
the support for it in the build system.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Tested-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20251124151837.2184382-20-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Originally, when the Rust upstream `alloc` standard library crate was
vendored in commit 057b8d257107 ("rust: adapt `alloc` crate to the
kernel"), a `README.md` file was added to explain the provenance and
licensing of the source files.
Thus do the same for the `syn` crate.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Tested-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20251124151837.2184382-19-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The `syn` crate depends on the `unicode-ident` crate to determine whether
characters have the XID_Start or XID_Continue properties according to
Unicode Standard Annex #31.
However, we only need ASCII identifiers in the kernel, thus we can
simplify the check and remove completely that dependency.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Tested-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20251124151837.2184382-18-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Originally, when the Rust upstream `alloc` standard library crate was
vendored in commit 057b8d257107 ("rust: adapt `alloc` crate to the
kernel"), the SPDX License Identifiers were added to every file so that
the license on those was clear.
Thus do the same for the `syn` crate.
This makes `scripts/spdxcheck.py` pass.
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Tested-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20251124151837.2184382-17-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This is a subset of the Rust `syn` crate, version 2.0.106 (released
2025-08-16), licensed under "Apache-2.0 OR MIT", from:
https://github.com/dtolnay/syn/raw/2.0.106/src
The files are copied as-is, with no modifications whatsoever (not even
adding the SPDX identifiers).
For copyright details, please see:
https://github.com/dtolnay/syn/blob/2.0.106/README.md#license
https://github.com/dtolnay/syn/blob/2.0.106/LICENSE-APACHE
https://github.com/dtolnay/syn/blob/2.0.106/LICENSE-MIT
The next two patches modify these files as needed for use within the
kernel. This patch split allows reviewers to double-check the import
and to clearly see the differences introduced.
The following script may be used to verify the contents:
for path in $(cd rust/syn/ && find . -type f -name '*.rs'); do
curl --silent --show-error --location \
https://github.com/dtolnay/syn/raw/2.0.106/src/$path \
| diff --unified rust/syn/$path - && echo $path: OK
done
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Tested-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20251124151837.2184382-16-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
With all the new files in place and ready from the new crate, enable
the support for it in the build system.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Tested-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20251124151837.2184382-15-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|