summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-12-01Bluetooth: btusb: add new custom firmwaresShuai Zhang
The new platform uses the QCA2066 chip along with a new board ID, which requires a dedicated firmware file to ensure proper initialization. Without this entry, the driver cannot locate and load the correct firmware, resulting in Bluetooth bring-up failure. This patch adds a new entry to the firmware table for QCA2066 so that the driver can correctly identify the board ID and load the appropriate firmware from 'qca/QCA2066/' in the linux-firmware repository. Signed-off-by: Shuai Zhang <quic_shuaz@quicinc.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VTMax Chou
Add the support ID(0x13d3, 0x3619) to usb_device_id table for Realtek RTL8852BE-VT. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3619 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VTMax Chou
Add the support ID(0x13d3, 0x3618) to usb_device_id table for Realtek RTL8852BE-VT. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3618 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VTMax Chou
Add the support ID(0x0489, 0xE12F) to usb_device_id table for Realtek RTL8852BE-VT. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e12f Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: iso: fix socket matching ambiguity between BIS and CISYang Li
When both BIS and CIS links exist, their sockets are in the BT_LISTEN state. dump sock: sk 000000001977ef51 state 6 src 10:a5:62:31:05:cf dst 00:00:00:00:00:00 sk 0000000031d28700 state 7 src 10:a5:62:31:05:cf dst00:00:00:00:00:00 sk 00000000613af00e state 4 # listen sock of bis src 10:a5:62:31:05:cf dst 54:00:00:d4:99:30 sk 000000001710468c state 9 src 10:a5:62:31:05:cf dst 54:00:00:d4:99:30 sk 000000005d97dfde state 4 #listen sock of cis src 10:a5:62:31:05:cf dst 00:00:00:00:00:00 To locate the CIS socket correctly, check both the BT_LISTEN state and whether dst addr is BDADDR_ANY. Link: https://github.com/bluez/bluez/issues/1224 Signed-off-by: Yang Li <yang.li@amlogic.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: MAINTAINERS: Add Bartosz Golaszewski as Qualcomm hci_qca maintainerKrzysztof Kozlowski
There are no dedicated maintainers of Qualcomm hci_qca Bluetooth drivers, but there should be, because these are actively used on many old and new platforms. Bartosz Golaszewski agreed to take care of this code. Link: https://lore.kernel.org/r/CAMRc=MdqAATOcDPhd=u0vOb8nLxSRd7N8rLGLO8F5Ywq3+=JCw@mail.gmail.com/ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btrtl: Add the support for RTL8761CUVMax Chou
Add support for RTL8761CUV BT controller on the USB interface. Do not apply IC_MATCH_FL_HCIVER when hci_ver is 0 in the ic_id_table. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=c761 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Controller S: SerialNumber=10000 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: Remove redundant pm_runtime_mark_last_busy() callsSakari Ailus
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(), pm_runtime_autosuspend() and pm_request_autosuspend() now include a call to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to pm_runtime_mark_last_busy(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01dt-bindings: net: Convert Marvell 8897/8997 bindings to DT schemaAriel D'Alessandro
Convert the existing text-based DT bindings for Marvell 8897/8997 (sd8897/sd8997) bluetooth devices controller to a DT schema. While here, bindings for "usb1286,204e" (USB interface) are dropped from the DT schema definition as these are currently documented in file [0]. [0] Documentation/devicetree/bindings/net/btusb.txt Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btusb: Reclassify Qualcomm WCN6855 debug packetsPascal Giard
Some Qualcomm Bluetooth controllers, e.g., QCNFA765 with WCN6855 chip, send debug packets as ACL frames with header 0x2EDC. The kernel misinterprets these as malformed ACL packets, causing repeated errors: Bluetooth: hci0: ACL packet for unknown connection handle 3804 This can occur hundreds of times per minute, greatly cluttering logs. On my computer, I am observing approximately 7 messages per second when streaming audio to a speaker. For Qualcomm controllers exchanging over UART, hci_qca.c already filters out these debug packets. This patch is for controllers not going through UART, but USB. This patch uses the classify_pkt_type callback to reclassify the packets with handle 0x2EDC as HCI_DIAG_PKT before they reach the HCI layer. This change is only applied to Qualcomm devices marked as BTUSB_QCA_WCN6855. Tested on: Thinkpad T14 gen2 (AMD) with QCNFA765 (0489:E0D0) Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btusb: Add new VID/PID 2b89/6275 for RTL8761BUVChingbin Li
Add VID 2b89 & PID 6275 for Realtek RTL8761BUV USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2b89 ProdID=6275 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C239987 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Chingbin Li <liqb365@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btintel_pcie: Suspend/Resume: Controller doorbell interrupt handlingRavindra
Due to a hardware bug during suspend/resume, the controller may miss a doorbell interrupt. To address this, a retry mechanism has been added to inform the controller before reporting a failure. Test case: - run suspend and resume cycles. Signed-off-by: Ravindra <ravindra@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btintel_pcie: Support for S4 (Hibernate)Ravindra
During S4 (hibernate), the Bluetooth device loses power. Upon resume, the driver performs the following actions: 1. Unregisters hdev 2. Calls function level reset 3. Registers hdev Test case: - run command sudo rtcwake -m disk -s 60 Signed-off-by: Ravindra <ravindra@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btusb: MT7922: Add VID/PID 0489/e170Chris Lu
Add VID 0489 & PID e170 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e170 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: btusb: MT7920: Add VID/PID 0489/e135Chris Lu
Add VID 0489 & PID e135 for MediaTek MT7920 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e135 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: ISO: Fix not updating BIS sender source addressLuiz Augusto von Dentz
The source address for a BIS sender/Broadcast Source shall be updated with the advertisement address since in case privacy is enabled it may use an RPA rather than an identity address. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: MGMT: Allow use of Set Device Flags without Add DeviceLuiz Augusto von Dentz
In certain cases setting devices flags like HCI_CONN_FLAG_PAST it shouldn't require to do Add Device first since it may not need to add an auto-connect policy, so this instead just automatically creates a hci_conn_params if one cannot be found using HCI_AUTO_CONN_DISABLED. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: ISO: Attempt to resolve broadcast addressLuiz Augusto von Dentz
Broadcasters maybe using RPAs which can change over time and not matching the address used as destination in the socket, so this attempts to resolve the addresses then match with the socket address, in case that uses an indentity address, or then match the IRKs if both broadcaster and socket are using RPAs. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: HCI: Always use the identity address when initializing a connectionLuiz Augusto von Dentz
This makes sure hci_conn is initialized with the identity address if a matching IRK exists which avoids the trouble of having to do it at multiple places which seems to be missing (e.g. CIS, BIS and PA). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: ISO: Add support to bind to trigger PASTLuiz Augusto von Dentz
This makes it possible to bind to a different destination address after being connected (BT_CONNECTED, BT_CONNECT2) which then triggers PAST Sender proceedure to transfer the PA Sync to the destination address. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: hci_core: Introduce HCI_CONN_FLAG_PASTLuiz Augusto von Dentz
This introduces a new device flag so userspace can indicate if it wants to enable PAST Receiver for a specific device. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: HCI: Add initial support for PASTLuiz Augusto von Dentz
This adds PAST related commands (HCI_OP_LE_PAST, HCI_OP_LE_PAST_SET_INFO and HCI_OP_LE_PAST_PARAMS) and events (HCI_EV_LE_PAST_RECEIVED) along with handling of PAST sender and receiver features bits including new MGMG settings ( HCI_EV_LE_PAST_RECEIVED and MGMT_SETTING_PAST_RECEIVER) which userspace can use to determine if PAST is supported by the controller. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: hci_h5: implement CRC data integrityJavier Nieto
The UART-based H5 protocol supports CRC data integrity checks for reliable packets. The host sets bit 5 in the configuration field of the CONFIG link control message to indicate that CRC is supported. The controller sets the same bit in the CONFIG RESPONSE message to indicate that CRC may be used from then on. Tested on a MangoPi MQ-Pro with a Realtek RTL8723DS Bluetooth controller using the tip of the bluetooth-next tree. Signed-off-by: Javier Nieto <jgnieto@cs.stanford.edu> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: hci_h5: avoid sending two SYNC messagesJavier Nieto
Previously, h5_open() called h5_link_control() to send a SYNC message. But h5_link_control() only enqueues the packet and requires the caller to call hci_uart_tx_wakeup(). Thus, after H5_SYNC_TIMEOUT ran out (100ms), h5_timed_event() would be called and, realizing that the state was still H5_UNINITIALIZED, it would re-enqueue the SYNC and call hci_uart_tx_wakeup(). Consequently, two SYNC packets would be sent and initialization would unnecessarily wait for 100ms. The naive solution of calling hci_uart_tx_wakeup() in h5_open() does not work because it will only schedule tx work if the HCI_PROTO_READY bit is set and hci_serdev only sets it after h5_open() returns. This patch removes the extraneous SYNC being enqueued and makes h5_timed_event() wake up on the next jiffy. Signed-off-by: Javier Nieto <jgnieto@cs.stanford.edu> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01Bluetooth: mediatek: add gpio pin to reset btZhangchao Zhang
Support the platform Bluetooth to be reset by hardware pin, when a Bluetooth exception occurs, attempt to reset the Bluetooth module using the hardware reset pin, as this method is generally more stable and reliable than a software reset. If the hardware reset pin is not specified in the device tree, fall back to the existing software reset mechanism to ensure backward compatibility. Co-developed: Sean Wang <Sean.Wang@mediatek.com> Co-developed: Hao Qin <hao.qin@mediatek.com> Co-developed: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Zhangchao Zhang <ot_zhangchao.zhang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-12-01sched_ext: Fix incorrect sched_class settings for per-cpu migration tasksZqiang
When loading the ebpf scheduler, the tasks in the scx_tasks list will be traversed and invoke __setscheduler_class() to get new sched_class. however, this would also incorrectly set the per-cpu migration task's->sched_class to rt_sched_class, even after unload, the per-cpu migration task's->sched_class remains sched_rt_class. The log for this issue is as follows: ./scx_rustland --stats 1 [ 199.245639][ T630] sched_ext: "rustland" does not implement cgroup cpu.weight [ 199.269213][ T630] sched_ext: BPF scheduler "rustland" enabled 04:25:09 [INFO] RustLand scheduler attached bpftrace -e 'iter:task /strcontains(ctx->task->comm, "migration")/ { printf("%s:%d->%pS\n", ctx->task->comm, ctx->task->pid, ctx->task->sched_class); }' Attaching 1 probe... migration/0:24->rt_sched_class+0x0/0xe0 migration/1:27->rt_sched_class+0x0/0xe0 migration/2:33->rt_sched_class+0x0/0xe0 migration/3:39->rt_sched_class+0x0/0xe0 migration/4:45->rt_sched_class+0x0/0xe0 migration/5:52->rt_sched_class+0x0/0xe0 migration/6:58->rt_sched_class+0x0/0xe0 migration/7:64->rt_sched_class+0x0/0xe0 sched_ext: BPF scheduler "rustland" disabled (unregistered from user space) EXIT: unregistered from user space 04:25:21 [INFO] Unregister RustLand scheduler bpftrace -e 'iter:task /strcontains(ctx->task->comm, "migration")/ { printf("%s:%d->%pS\n", ctx->task->comm, ctx->task->pid, ctx->task->sched_class); }' Attaching 1 probe... migration/0:24->rt_sched_class+0x0/0xe0 migration/1:27->rt_sched_class+0x0/0xe0 migration/2:33->rt_sched_class+0x0/0xe0 migration/3:39->rt_sched_class+0x0/0xe0 migration/4:45->rt_sched_class+0x0/0xe0 migration/5:52->rt_sched_class+0x0/0xe0 migration/6:58->rt_sched_class+0x0/0xe0 migration/7:64->rt_sched_class+0x0/0xe0 This commit therefore generate a new scx_setscheduler_class() and add check for stop_sched_class to replace __setscheduler_class(). Fixes: f0e1a0643a59 ("sched_ext: Implement BPF extensible scheduler class") Cc: stable@vger.kernel.org # v6.12+ Signed-off-by: Zqiang <qiang.zhang@linux.dev> Reviewed-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-12-01x86/platform: Fix and extend kernel-doc comments in <asm/x86_init.h>Randy Dunlap
Fix most (17) kernel-doc warnings in x86_init.h (except for struct x86_init_ops). The changes are: - fix struct member name typos - add ending ':' to struct member names - add some missing struct member descriptions Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://patch.msgid.link/20251129002524.1196500-1-rdunlap@infradead.org
2025-12-01MAINTAINERS: Remove myself from xe maintainersLucas De Marchi
As I'm leaving Intel soon, drop myself from the list of Xe maintainers. Also update the mailmap to switch to my kernel.org address. Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patch.msgid.link/20251126224357.2482051-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-12-01selftests: netconsole: remove log noise due to socat exitAndre Carvalho
This removes some noise that can be distracting while looking at selftests by redirecting socat stderr to /dev/null. Before this commit, netcons_basic would output: Running with target mode: basic (ipv6) 2025/11/29 12:08:03 socat[259] W exiting on signal 15 2025/11/29 12:08:03 socat[271] W exiting on signal 15 basic : ipv6 : Test passed Running with target mode: basic (ipv4) 2025/11/29 12:08:05 socat[329] W exiting on signal 15 2025/11/29 12:08:05 socat[322] W exiting on signal 15 basic : ipv4 : Test passed Running with target mode: extended (ipv6) 2025/11/29 12:08:08 socat[386] W exiting on signal 15 2025/11/29 12:08:08 socat[386] W exiting on signal 15 2025/11/29 12:08:08 socat[380] W exiting on signal 15 extended : ipv6 : Test passed Running with target mode: extended (ipv4) 2025/11/29 12:08:10 socat[440] W exiting on signal 15 2025/11/29 12:08:10 socat[435] W exiting on signal 15 2025/11/29 12:08:10 socat[435] W exiting on signal 15 extended : ipv4 : Test passed After these changes, output looks like: Running with target mode: basic (ipv6) basic : ipv6 : Test passed Running with target mode: basic (ipv4) basic : ipv4 : Test passed Running with target mode: extended (ipv6) extended : ipv6 : Test passed Running with target mode: extended (ipv4) extended : ipv4 : Test passed Signed-off-by: Andre Carvalho <asantostc@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251129-netcons-socat-noise-v1-1-605a0cea8fca@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01net: dsa: yt921x: Set ageing_time_min/ageing_time_maxDavid Yang
The ageing time is in 5s step, ranging from 1 step to 0xffff steps, so add appropriate attributes. Signed-off-by: David Yang <mmyangfl@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251129042137.3034032-1-mmyangfl@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01l2tp: correct debugfs label for tunnel tx statsAlok Tiwari
l2tp_dfs_seq_tunnel_show prints two groups of tunnel statistics. The first group reports transmit counters, but the code labels it as rx. Set the label to "tx" so the debugfs output reflects the actual meaning. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251128085300.3377210-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01selftests: net: add a hint about MACAddressPolicy=persistentJakub Kicinski
New NIPA installation had been reporting a few flaky tests. arp_ndisc_evict_nocarrier is most flaky of them all. I suspect that the flakiness is due to udev swapping the MAC addresses on the interfaces. Extend the message in arp_ndisc_evict_nocarrier to hint at this potential issue. Having the neigh get fail right after ping is rather unusual, unless udev changes the MAC addr causing a flush in the meantime. Link: https://patch.msgid.link/20251127194556.2409574-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01selftests: net: py: handle interrupt during cleanupJakub Kicinski
Following up on the old discussion [1]. Let the BaseExceptions out of defer()'ed cleanup. And handle it in the main loop. This allows us to exit the tests if user hit Ctrl-C during defer(). Link: https://lore.kernel.org/20251119063228.3adfd743@kernel.org # [1] Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20251128004846.2602687-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01net: dlink: fix several spelling mistakes in commentsYeounsu Moon
This patch fixes multiple spelling mistakes in dl2k driver comments: - "deivices" -> "devices" - "Ttransmit" -> "Transmit" - "catastronphic" -> "catastrophic" - "Extened" -> "Extended" Also fix incorrect unit description: `rx_timeout` uses 640ns increments, not 64ns. - "64ns" -> "640ns" These are comment-only changes and do not affect runtime behavior. Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20251130220652.5425-2-yyyynoom@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01Merge branch 'net-freescale-migrate-to-get_rx_ring_count-ethtool-callback'Jakub Kicinski
Breno Leitao says: ==================== net: freescale: migrate to .get_rx_ring_count() ethtool callback This series migrates Freescale network drivers to use the new .get_rx_ring_count() ethtool callback introduced in commit 84eaf4359c36 ("net: ethtool: add get_rx_ring_count callback to optimize RX ring queries"). The new callback simplifies the .get_rxnfc() implementation by removing ETHTOOL_GRXRINGS handling and moving it to a dedicated callback. This provides a cleaner separation of concerns and aligns these drivers with the modern ethtool API. The series updates the following Freescale drivers: - enetc - dppa2 - gianfar ==================== Link: https://patch.msgid.link/20251128-gxring_freescale-v1-0-22a978abf29e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01net: enetc: convert to use .get_rx_ring_countBreno Leitao
Convert the enetc driver to use the new .get_rx_ring_count ethtool operation instead of implementing .get_rxnfc for handling ETHTOOL_GRXRINGS command. This simplifies the code in two ways: 1. For enetc_get_rxnfc(): Remove the ETHTOOL_GRXRINGS case from the switch statement while keeping other cases for classifier rules. 2. For enetc4_get_rxnfc(): Remove it completely and use enetc_get_rxnfc() instead. Now on, enetc_get_rx_ring_count() is the callback that returns the number of RX rings for enetc driver. Also, remove the documentation around enetc4_get_rxnfc(), which was not matching what the function did(?!). Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251128-gxring_freescale-v1-3-22a978abf29e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01net: dpaa2: convert to use .get_rx_ring_countBreno Leitao
Convert the dpaa2 driver to use the new .get_rx_ring_count ethtool operation instead of implementing .get_rxnfc for handling ETHTOOL_GRXRINGS command. This simplifies the code by removing the ETHTOOL_GRXRINGS case from the switch statement and replacing it with a direct return of the queue count. The driver still maintains .get_rxnfc for other commands including ETHTOOL_GRXCLSRLCNT, ETHTOOL_GRXCLSRULE, and ETHTOOL_GRXCLSRLALL. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251128-gxring_freescale-v1-2-22a978abf29e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01net: gianfar: convert to use .get_rx_ring_countBreno Leitao
Convert the gianfar driver to use the new .get_rx_ring_count ethtool operation instead of implementing .get_rxnfc for handling ETHTOOL_GRXRINGS command. This simplifies the code by removing the ETHTOOL_GRXRINGS case from the switch statement and replacing it with a direct return of the queue count. The driver still maintains .get_rxnfc for other commands including ETHTOOL_GRXCLSRLCNT, ETHTOOL_GRXCLSRULE, and ETHTOOL_GRXCLSRLALL. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251128-gxring_freescale-v1-1-22a978abf29e@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01ynl: samples: Fix spelling mistake "failedq" -> "failed"Colin Ian King
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://patch.msgid.link/20251128173802.318520-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-12-01hwmon: (dell-smm) Add Dell G5 5505 to fan control whitelistGabriel Marcano
Allow manual PWM control on Dell G5 5505 (and SE). Signed-off-by: Gabriel Marcano <gabemarcano@yahoo.com> Link: https://lore.kernel.org/r/20251128191650.6191-1-gabemarcano@yahoo.com Acked-by: Pali Rohár <pali@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-12-01Merge tag 'vfs-6.19-rc1.folio' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull folio updates from Christian Brauner: "Add a new folio_next_pos() helper function that returns the file position of the first byte after the current folio. This is a common operation in filesystems when needing to know the end of the current folio. The helper is lifted from btrfs which already had its own version, and is now used across multiple filesystems and subsystems: - btrfs - buffer - ext4 - f2fs - gfs2 - iomap - netfs - xfs - mm This fixes a long-standing bug in ocfs2 on 32-bit systems with files larger than 2GiB. Presumably this is not a common configuration, but the fix is backported anyway. The other filesystems did not have bugs, they were just mildly inefficient. This also introduce uoff_t as the unsigned version of loff_t. A recent commit inadvertently changed a comparison from being unsigned (on 64-bit systems) to being signed (which it had always been on 32-bit systems), leading to sporadic fstests failures. Generally file sizes are restricted to being a signed integer, but in places where -1 is passed to indicate "up to the end of the file", it is convenient to have an unsigned type to ensure comparisons are always unsigned regardless of architecture" * tag 'vfs-6.19-rc1.folio' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: Add uoff_t mm: Use folio_next_pos() xfs: Use folio_next_pos() netfs: Use folio_next_pos() iomap: Use folio_next_pos() gfs2: Use folio_next_pos() f2fs: Use folio_next_pos() ext4: Use folio_next_pos() buffer: Use folio_next_pos() btrfs: Use folio_next_pos() filemap: Add folio_next_pos()
2025-12-01Merge tag 'vfs-6.19-rc1.coredump' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull pidfd and coredump updates from Christian Brauner: "Features: - Expose coredump signal via pidfd Expose the signal that caused the coredump through the pidfd interface. The recent changes to rework coredump handling to rely on unix sockets are in the process of being used in systemd. The previous systemd coredump container interface requires the coredump file descriptor and basic information including the signal number to be sent to the container. This means the signal number needs to be available before sending the coredump to the container. - Add supported_mask field to pidfd Add a new supported_mask field to struct pidfd_info that indicates which information fields are supported by the running kernel. This allows userspace to detect feature availability without relying on error codes or kernel version checks. Cleanups: - Drop struct pidfs_exit_info and prepare to drop exit_info pointer, simplifying the internal publication mechanism for exit and coredump information retrievable via the pidfd ioctl - Use guard() for task_lock in pidfs - Reduce wait_pidfd lock scope - Add missing PIDFD_INFO_SIZE_VER1 constant - Add missing BUILD_BUG_ON() assert on struct pidfd_info Fixes: - Fix PIDFD_INFO_COREDUMP handling Selftests: - Split out coredump socket tests and common helpers into separate files for better organization - Fix userspace coredump client detection issues - Handle edge-triggered epoll correctly - Ignore ENOSPC errors in tests - Add debug logging to coredump socket tests, socket protocol tests, and test helpers - Add tests for PIDFD_INFO_COREDUMP_SIGNAL - Add tests for supported_mask field - Update pidfd header for selftests" * tag 'vfs-6.19-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits) pidfs: reduce wait_pidfd lock scope selftests/coredump: add second PIDFD_INFO_COREDUMP_SIGNAL test selftests/coredump: add first PIDFD_INFO_COREDUMP_SIGNAL test selftests/coredump: ignore ENOSPC errors selftests/coredump: add debug logging to coredump socket protocol tests selftests/coredump: add debug logging to coredump socket tests selftests/coredump: add debug logging to test helpers selftests/coredump: handle edge-triggered epoll correctly selftests/coredump: fix userspace coredump client detection selftests/coredump: fix userspace client detection selftests/coredump: split out coredump socket tests selftests/coredump: split out common helpers selftests/pidfd: add second supported_mask test selftests/pidfd: add first supported_mask test selftests/pidfd: update pidfd header pidfs: expose coredump signal pidfs: drop struct pidfs_exit_info pidfs: prepare to drop exit_info pointer pidfd: add a new supported_mask field pidfs: add missing BUILD_BUG_ON() assert on struct pidfd_info ...
2025-12-01drm/xe: Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATEMatthew Brost
Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE which sets the exec queue default state to user data passed in. The intent is for a Mesa tool to use this replay GPU hangs. v2: - Enable the flag DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE - Fix the page size math calculation to avoid a crash v4: - Use vmemdup_user (Maarten) - Copy default state first into LRC, then replay state (Testing, Carlos) Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patch.msgid.link/20251126185952.546277-10-matthew.brost@intel.com
2025-12-01drm/xe: Add replay_offset and replay_length lines to LRC HWCTX snapshotMatthew Brost
Add replay_offset and replay_length lines to LRC HWCTX snapshot with the idea being this information can be used extract the data which needs to be pass to exec queue extension DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE so GPU hang can be replayed via a Mesa tool. The additional lines look like: [HWCTX].replay_offset: 0x%x [HWCTX].replay_length: 0x%x Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patch.msgid.link/20251126185952.546277-9-matthew.brost@intel.com
2025-12-01drm/xe/uapi: Add DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATEMatthew Brost
Add DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE which accepts a user pointer to populate the exec queue state so that a GPU hang can be replayed via a Mesa tool. v2: Update the value for HANG_REPLAY_STATE flag Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Signed-off-by: Carlos Santa <carlos.santa@intel-corp-partner.google.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patch.msgid.link/20251126185952.546277-8-matthew.brost@intel.com
2025-12-01drm/xe: Add VM.uapi_flags to VM snapshot captureMatthew Brost
Add VM.uapi_flags to VM snapshot capture VM snapshot capture. This is useful information for debug and will help build a robust GPU hang replay tool. The current format is: VM.uapi_flags: 0x%x Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patch.msgid.link/20251126185952.546277-7-matthew.brost@intel.com
2025-12-01drm/xe: Add cpu_caching to properties line in VM snapshot captureMatthew Brost
Add CPU caching to properties line in VM snapshot capture indicating the BO caching properites. This is useful information for debug and will help build a robust GPU hang replay tool. The current format is: [<vma address>]: <permissions>|<type>|mem_region=0x%x|pat_index=%d|cpu_caching=%d Permissions has two options, either "read_only" or "read_write". Type has three options, either "userptr", "null_sparse", or "bo". Memory region is a bit mask of where the memory is located. Pat index corresponds to the value setup upon VM bind. CPU caching corresponds to the value of BO setup upon creation. v2: - Save off cpu_caching value rather than looking at BO (Carlos) v4: - Fix NULL ptr dereference (Carlos) Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patch.msgid.link/20251126185952.546277-6-matthew.brost@intel.com
2025-12-01drm/xe: Add pat_index to properties line in VM snapshot captureMatthew Brost
Add pat index to properties line in VM snapshot capture indicating the VMA caching properites. This is useful information for debug and will help build a robust GPU hang replay tool. The current format is: [<vma address>]: <permissions>|<type>|mem_region=0x%x|pat_index=%d Permissions has two options, either "read_only" or "read_write". Type has three options, either "userptr", "null_sparse", or "bo". Memory region is a bit mask of where the memory is located. Pat index corresponds to the value setup upon VM bind. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patch.msgid.link/20251126185952.546277-5-matthew.brost@intel.com
2025-12-01drm/xe: Add mem_region to properties line in VM snapshot captureMatthew Brost
Add memory region to properties line in VM snapshot capture indicating where the memory is located. The memory region corresponds to regions in the uAPI. This is useful information for debug and will help build a robust GPU hang replay tool. The current format is: [<vma address>]: <permissions>|<type>|mem_region=0x%x Permissions has two options, either "read_only" or "read_write". Type has three options, either "userptr", "null_sparse", or "bo". Memory region is a bit mask of where the memory is located. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patch.msgid.link/20251126185952.546277-4-matthew.brost@intel.com
2025-12-01drm/xe: Add "null_sparse" type to VM snap propertiesMatthew Brost
Add "null_sparse" type to VM snap properties indicating the VMA reads zero and writes are droppped. This is useful information for debug and will help build a robust GPU hang replay tool. The current format is: [<vma address>]: <permissions>|<type> Permissions has two options, either "read_only" or "read_write". Type has three options, either "userptr", "null_sparse", or "bo". Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Link: https://patch.msgid.link/20251126185952.546277-3-matthew.brost@intel.com
generated by cgit v1.2.3 (git 2.25.1) at 2026-10-03 03:24:49 +0000