| Age | Commit message (Collapse) | Author |
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
Disable regulator when error happens to balance the reference count.
|
|
Introduce DRM_XE_GEM_CREATE_FLAG_NO_COMPRESSION to let userspace
opt out of CCS compression on a per-BO basis. When set, the driver
maps this to XE_BO_FLAG_NO_COMPRESSION, skips CCS metadata
allocation/clearing, and rejects compressed PAT indices at vm_bind.
This avoids extra memory ops and manual CCS state handling for buffers.
To allow userspace to detect at runtime whether the kernel supports this
feature, add DRM_XE_QUERY_CONFIG_FLAG_HAS_NO_COMPRESSION_HINT and expose
it via query_config() on Xe2+ platforms.
Mesa PR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38425
IGT PR: https://patchwork.freedesktop.org/patch/685180/
v2
- Changed error code from -EINVAL to -EOPNOTSUPP for unsupported flag
usage on pre-Xe2 platforms
- Fixed checkpatch warning in xe_vm.c
- Fixed kernel-doc formatting in xe_drm.h
v3
- Rebase
- Updated commit title and description
- Added UAPI for DRM_XE_QUERY_CONFIG_FLAG_HAS_NO_COMPRESSION_HINT and
exposed it via query_config()
v4
- Rebase
v5
- Included Mesa PR and IGT PR in the commit description
- Used xe_pat_index_get_comp_en() to extract the compression
v6
- Added XE_IOCTL_DBG() checks for argument validation
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251204040402.2692921-2-sanjay.kumar.yadav@intel.com
|
|
When support for RTL8211F(D)(I)-VD-CG was introduced in commit
bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
the implementation assumed that this PHY model doesn't have the
control register PHYCR2 (Page 0xa43 Address 0x19). This
assumption was based on the differences in CLKOUT configurations
between RTL8211FVD and the remaining RTL8211F PHYs. In the latter
commit 2c67301584f2
("net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present")
this assumption was expanded to the PHY-mode EEE.
I performed tests on RTL8211FI-VD-CG and confirmed that disabling
PHY-mode EEE works correctly and is uniform with other PHYs
supported by the driver. To validate the correctness,
I contacted Realtek support. Realtek confirmed that PHY-mode EEE on
RTL8211F(D)(I)-VD-CG is configured via Page 0xa43 Address 0x19 bit 5.
Moreover, Realtek informed me that the most recent datasheet
for RTL8211F(D)(I)-VD-CG v1.1 is incomplete and the naming of
control registers is partly inconsistent. The errata I
received from Realtek corrects the naming as follows:
| Register | Datasheet v1.1 | Errata |
|-------------------------|----------------|--------|
| Page 0xa44 Address 0x11 | PHYCR2 | PHYCR3 |
| Page 0xa43 Address 0x19 | N/A | PHYCR2 |
This information confirms that the supposedly missing control register,
PHYCR2, exists in the RTL8211F(D)(I)-VD-CG under the same address and
the same name. It controls widely the same configs as other PHYs from
the RTL8211F series (e.g. PHY-mode EEE). Clock out configuration is an
exception.
Given all this information, restore disabling of the PHY-mode EEE.
Fixes: 2c67301584f2 ("net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not present")
Signed-off-by: Ivan Galkin <ivan.galkin@axis.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251202-phy_eee-v1-1-fe0bf6ab3df0@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tariq Toukan says:
====================
mlx5 misc fixes 2025-12-01
This small patchset provides misc bug fixes from the team to the mlx5
core and Eth drivers.
====================
Link: https://patch.msgid.link/1764602008-1334866-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PSP is unregistered twice in:
_mlx5e_remove -> mlx5e_psp_unregister
mlx5e_nic_cleanup -> mlx5e_psp_unregister
This leads to a refcount underflow in some conditions:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 1694 at lib/refcount.c:28 refcount_warn_saturate+0xd8/0xe0
[...]
mlx5e_psp_unregister+0x26/0x50 [mlx5_core]
mlx5e_nic_cleanup+0x26/0x90 [mlx5_core]
mlx5e_remove+0xe6/0x1f0 [mlx5_core]
auxiliary_bus_remove+0x18/0x30
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x130
device_del+0x159/0x3c0
mlx5_rescan_drivers_locked+0xbc/0x2a0 [mlx5_core]
[...]
Do not directly remove psp from the _mlx5e_remove path, the PSP cleanup
happens as part of profile cleanup.
Fixes: 89ee2d92f66c ("net/mlx5e: Support PSP offload functionality")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1764602008-1334866-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The enable_mpesw() function returns -EINVAL if ldev->mode is not
MLX5_LAG_MODE_NONE. This means attempting to enable MPESW mode when it's
already enabled will fail. In contrast, disable_mpesw() properly checks
if the mode is MLX5_LAG_MODE_MPESW before proceeding, making it
naturally idempotent and safe to call multiple times.
Fix enable_mpesw() to return success if mpesw is already enabled.
Fixes: a32327a3a02c ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1764602008-1334866-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ets_qdisc_change
zdi-disclosures@trendmicro.com says:
The vulnerability is a race condition between `ets_qdisc_dequeue` and
`ets_qdisc_change`. It leads to UAF on `struct Qdisc` object.
Attacker requires the capability to create new user and network namespace
in order to trigger the bug.
See my additional commentary at the end of the analysis.
Analysis:
static int ets_qdisc_change(struct Qdisc *sch, struct nlattr *opt,
struct netlink_ext_ack *extack)
{
...
// (1) this lock is preventing .change handler (`ets_qdisc_change`)
//to race with .dequeue handler (`ets_qdisc_dequeue`)
sch_tree_lock(sch);
for (i = nbands; i < oldbands; i++) {
if (i >= q->nstrict && q->classes[i].qdisc->q.qlen)
list_del_init(&q->classes[i].alist);
qdisc_purge_queue(q->classes[i].qdisc);
}
WRITE_ONCE(q->nbands, nbands);
for (i = nstrict; i < q->nstrict; i++) {
if (q->classes[i].qdisc->q.qlen) {
// (2) the class is added to the q->active
list_add_tail(&q->classes[i].alist, &q->active);
q->classes[i].deficit = quanta[i];
}
}
WRITE_ONCE(q->nstrict, nstrict);
memcpy(q->prio2band, priomap, sizeof(priomap));
for (i = 0; i < q->nbands; i++)
WRITE_ONCE(q->classes[i].quantum, quanta[i]);
for (i = oldbands; i < q->nbands; i++) {
q->classes[i].qdisc = queues[i];
if (q->classes[i].qdisc != &noop_qdisc)
qdisc_hash_add(q->classes[i].qdisc, true);
}
// (3) the qdisc is unlocked, now dequeue can be called in parallel
// to the rest of .change handler
sch_tree_unlock(sch);
ets_offload_change(sch);
for (i = q->nbands; i < oldbands; i++) {
// (4) we're reducing the refcount for our class's qdisc and
// freeing it
qdisc_put(q->classes[i].qdisc);
// (5) If we call .dequeue between (4) and (5), we will have
// a strong UAF and we can control RIP
q->classes[i].qdisc = NULL;
WRITE_ONCE(q->classes[i].quantum, 0);
q->classes[i].deficit = 0;
gnet_stats_basic_sync_init(&q->classes[i].bstats);
memset(&q->classes[i].qstats, 0, sizeof(q->classes[i].qstats));
}
return 0;
}
Comment:
This happens because some of the classes have their qdiscs assigned to
NULL, but remain in the active list. This commit fixes this issue by always
removing the class from the active list before deleting and freeing its
associated qdisc
Reproducer Steps
(trimmed version of what was sent by zdi-disclosures@trendmicro.com)
```
DEV="${DEV:-lo}"
ROOT_HANDLE="${ROOT_HANDLE:-1:}"
BAND2_HANDLE="${BAND2_HANDLE:-20:}" # child under 1:2
PING_BYTES="${PING_BYTES:-48}"
PING_COUNT="${PING_COUNT:-200000}"
PING_DST="${PING_DST:-127.0.0.1}"
SLOW_TBF_RATE="${SLOW_TBF_RATE:-8bit}"
SLOW_TBF_BURST="${SLOW_TBF_BURST:-100b}"
SLOW_TBF_LAT="${SLOW_TBF_LAT:-1s}"
cleanup() {
tc qdisc del dev "$DEV" root 2>/dev/null
}
trap cleanup EXIT
ip link set "$DEV" up
tc qdisc del dev "$DEV" root 2>/dev/null || true
tc qdisc add dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2
tc qdisc add dev "$DEV" parent 1:2 handle "$BAND2_HANDLE" \
tbf rate "$SLOW_TBF_RATE" burst "$SLOW_TBF_BURST" latency "$SLOW_TBF_LAT"
tc filter add dev "$DEV" parent 1: protocol all prio 1 u32 match u32 0 0 flowid 1:2
tc -s qdisc ls dev $DEV
ping -I "$DEV" -f -c "$PING_COUNT" -s "$PING_BYTES" -W 0.001 "$PING_DST" \
>/dev/null 2>&1 &
tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 0
tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 2 strict 2
tc -s qdisc ls dev $DEV
tc qdisc del dev "$DEV" parent 1:2 || true
tc -s qdisc ls dev $DEV
tc qdisc change dev "$DEV" root handle "$ROOT_HANDLE" ets bands 1 strict 1
```
KASAN report
```
==================================================================
BUG: KASAN: slab-use-after-free in ets_qdisc_dequeue+0x1071/0x11b0 kernel/net/sched/sch_ets.c:481
Read of size 8 at addr ffff8880502fc018 by task ping/12308
>
CPU: 0 UID: 0 PID: 12308 Comm: ping Not tainted 6.18.0-rc4-dirty #1 PREEMPT(full)
Hardware name: QEMU Ubuntu 25.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<IRQ>
__dump_stack kernel/lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 kernel/lib/dump_stack.c:120
print_address_description kernel/mm/kasan/report.c:378
print_report+0x156/0x4c9 kernel/mm/kasan/report.c:482
kasan_report+0xdf/0x110 kernel/mm/kasan/report.c:595
ets_qdisc_dequeue+0x1071/0x11b0 kernel/net/sched/sch_ets.c:481
dequeue_skb kernel/net/sched/sch_generic.c:294
qdisc_restart kernel/net/sched/sch_generic.c:399
__qdisc_run+0x1c9/0x1b00 kernel/net/sched/sch_generic.c:417
__dev_xmit_skb kernel/net/core/dev.c:4221
__dev_queue_xmit+0x2848/0x4410 kernel/net/core/dev.c:4729
dev_queue_xmit kernel/./include/linux/netdevice.h:3365
[...]
Allocated by task 17115:
kasan_save_stack+0x30/0x50 kernel/mm/kasan/common.c:56
kasan_save_track+0x14/0x30 kernel/mm/kasan/common.c:77
poison_kmalloc_redzone kernel/mm/kasan/common.c:400
__kasan_kmalloc+0xaa/0xb0 kernel/mm/kasan/common.c:417
kasan_kmalloc kernel/./include/linux/kasan.h:262
__do_kmalloc_node kernel/mm/slub.c:5642
__kmalloc_node_noprof+0x34e/0x990 kernel/mm/slub.c:5648
kmalloc_node_noprof kernel/./include/linux/slab.h:987
qdisc_alloc+0xb8/0xc30 kernel/net/sched/sch_generic.c:950
qdisc_create_dflt+0x93/0x490 kernel/net/sched/sch_generic.c:1012
ets_class_graft+0x4fd/0x800 kernel/net/sched/sch_ets.c:261
qdisc_graft+0x3e4/0x1780 kernel/net/sched/sch_api.c:1196
[...]
Freed by task 9905:
kasan_save_stack+0x30/0x50 kernel/mm/kasan/common.c:56
kasan_save_track+0x14/0x30 kernel/mm/kasan/common.c:77
__kasan_save_free_info+0x3b/0x70 kernel/mm/kasan/generic.c:587
kasan_save_free_info kernel/mm/kasan/kasan.h:406
poison_slab_object kernel/mm/kasan/common.c:252
__kasan_slab_free+0x5f/0x80 kernel/mm/kasan/common.c:284
kasan_slab_free kernel/./include/linux/kasan.h:234
slab_free_hook kernel/mm/slub.c:2539
slab_free kernel/mm/slub.c:6630
kfree+0x144/0x700 kernel/mm/slub.c:6837
rcu_do_batch kernel/kernel/rcu/tree.c:2605
rcu_core+0x7c0/0x1500 kernel/kernel/rcu/tree.c:2861
handle_softirqs+0x1ea/0x8a0 kernel/kernel/softirq.c:622
__do_softirq kernel/kernel/softirq.c:656
[...]
Commentary:
1. Maher Azzouzi working with Trend Micro Zero Day Initiative was reported as
the person who found the issue. I requested to get a proper email to add to the
reported-by tag but got no response. For this reason i will credit the person
i exchanged emails with i.e zdi-disclosures@trendmicro.com
2. Neither i nor Victor who did a much more thorough testing was able to
reproduce a UAF with the PoC or other approaches we tried. We were both able to
reproduce a null ptr deref. After exchange with zdi-disclosures@trendmicro.com
they sent a small change to be made to the code to add an extra delay which
was able to simulate the UAF. i.e, this:
qdisc_put(q->classes[i].qdisc);
mdelay(90);
q->classes[i].qdisc = NULL;
I was informed by Thomas Gleixner(tglx@linutronix.de) that adding delays was
acceptable approach for demonstrating the bug, quote:
"Adding such delays is common exploit validation practice"
The equivalent delay could happen "by virt scheduling the vCPU out, SMIs,
NMIs, PREEMPT_RT enabled kernel"
3. I asked the OP to test and report back but got no response and after a
few days gave up and proceeded to submit this fix.
Fixes: de6d25924c2a ("net/sched: sch_ets: don't peek at classes beyond 'nbands'")
Reported-by: zdi-disclosures@trendmicro.com
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20251128151919.576920-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
prp_get_untagged_frame() calls __pskb_copy() to create frame->skb_std
but doesn't check if the allocation failed. If __pskb_copy() returns
NULL, skb_clone() is called with a NULL pointer, causing a crash:
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 5625 Comm: syz.1.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:skb_clone+0xd7/0x3a0 net/core/skbuff.c:2041
Code: 03 42 80 3c 20 00 74 08 4c 89 f7 e8 23 29 05 f9 49 83 3e 00 0f 85 a0 01 00 00 e8 94 dd 9d f8 48 8d 6b 7e 49 89 ee 49 c1 ee 03 <43> 0f b6 04 26 84 c0 0f 85 d1 01 00 00 44 0f b6 7d 00 41 83 e7 0c
RSP: 0018:ffffc9000d00f200 EFLAGS: 00010207
RAX: ffffffff892235a1 RBX: 0000000000000000 RCX: ffff88803372a480
RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000000
RBP: 000000000000007e R08: ffffffff8f7d0f77 R09: 1ffffffff1efa1ee
R10: dffffc0000000000 R11: fffffbfff1efa1ef R12: dffffc0000000000
R13: 0000000000000820 R14: 000000000000000f R15: ffff88805144cc00
FS: 0000555557f6d500(0000) GS:ffff88808d72f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555581d35808 CR3: 000000005040e000 CR4: 0000000000352ef0
Call Trace:
<TASK>
hsr_forward_do net/hsr/hsr_forward.c:-1 [inline]
hsr_forward_skb+0x1013/0x2860 net/hsr/hsr_forward.c:741
hsr_handle_frame+0x6ce/0xa70 net/hsr/hsr_slave.c:84
__netif_receive_skb_core+0x10b9/0x4380 net/core/dev.c:5966
__netif_receive_skb_one_core net/core/dev.c:6077 [inline]
__netif_receive_skb+0x72/0x380 net/core/dev.c:6192
netif_receive_skb_internal net/core/dev.c:6278 [inline]
netif_receive_skb+0x1cb/0x790 net/core/dev.c:6337
tun_rx_batched+0x1b9/0x730 drivers/net/tun.c:1485
tun_get_user+0x2b65/0x3e90 drivers/net/tun.c:1953
tun_chr_write_iter+0x113/0x200 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x5c9/0xb30 fs/read_write.c:686
ksys_write+0x145/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0449f8e1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 f9 92 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 4c 93 02 00 48
RSP: 002b:00007ffd7ad94c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f044a1e5fa0 RCX: 00007f0449f8e1ff
RDX: 000000000000003e RSI: 0000200000000500 RDI: 00000000000000c8
RBP: 00007ffd7ad94d20 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000003e R11: 0000000000000293 R12: 0000000000000001
R13: 00007f044a1e5fa0 R14: 00007f044a1e5fa0 R15: 0000000000000003
</TASK>
Add a NULL check immediately after __pskb_copy() to handle allocation
failures gracefully.
Reported-by: syzbot+2fa344348a579b779e05@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2fa344348a579b779e05
Fixes: f266a683a480 ("net/hsr: Better frame dispatch")
Cc: stable@vger.kernel.org
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Tested-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/20251129093718.25320-1-ssrane_b23@ee.vjti.ac.in
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As FBC can utilize the system cache in xe3p_lpd onwards, we need
a provision to track which fbc instance is utilizing this cache.
A sub-struct at intel_display level to group all the fbc ops will
make fbc handling much easier. Introduce a fbc sub-struct and move
the fbc instance array into that.
v2: changes in commit message
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251127115349.249120-2-vinod.govindapillai@intel.com
|
|
syzbot reported a memory leak [1].
When function sock_alloc_send_skb() return NULL in nr_output(), the
original skb is not freed, which was allocated in nr_sendmsg(). Fix this
by freeing it before return.
[1]
BUG: memory leak
unreferenced object 0xffff888129f35500 (size 240):
comm "syz.0.17", pid 6119, jiffies 4294944652
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 10 52 28 81 88 ff ff ..........R(....
backtrace (crc 1456a3e4):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4983 [inline]
slab_alloc_node mm/slub.c:5288 [inline]
kmem_cache_alloc_node_noprof+0x36f/0x5e0 mm/slub.c:5340
__alloc_skb+0x203/0x240 net/core/skbuff.c:660
alloc_skb include/linux/skbuff.h:1383 [inline]
alloc_skb_with_frags+0x69/0x3f0 net/core/skbuff.c:6671
sock_alloc_send_pskb+0x379/0x3e0 net/core/sock.c:2965
sock_alloc_send_skb include/net/sock.h:1859 [inline]
nr_sendmsg+0x287/0x450 net/netrom/af_netrom.c:1105
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
sock_write_iter+0x293/0x2a0 net/socket.c:1195
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x45d/0x710 fs/read_write.c:686
ksys_write+0x143/0x170 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported-by: syzbot+d7abc36bbbb6d7d40b58@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7abc36bbbb6d7d40b58
Tested-by: syzbot+d7abc36bbbb6d7d40b58@syzkaller.appspotmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251129041315.1550766-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The check that determines if the message that warns about the per-dentry
timeout being greater than the super block timeout is not correct.
The initial value for this field is -1 and the type of the field is
unsigned long.
I could change the type to long but the message is in the wrong place
too, it should come after the timeout setting. So leave everything else
as it is and move the message and check the timeout is actually set
as an additional condition on issuing the message. Also fix the timeout
comparison.
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://patch.msgid.link/20251111060439.19593-2-raven@themaw.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 61fafbee6cfe ("xfrm: Determine inner GSO type from packet inner
protocol") attempted to fix GSO segmentation by reading the inner
protocol from XFRM_MODE_SKB_CB(skb)->protocol. This was incorrect
because the field holds the inner L4 protocol (TCP/UDP) instead of the
required tunnel protocol. Also, the memory location (shared by
XFRM_SKB_CB(skb) which could be overwritten by xfrm_replay_overflow())
is prone to corruption. This combination caused the kernel to select
the wrong inner mode and get the wrong address family.
The correct value is in xfrm_offload(skb)->proto, which is set from
the outer tunnel header's protocol field by esp[4|6]_gso_encap(). It
is initialized by xfrm[4|6]_tunnel_encap_add() to either IPPROTO_IPIP
or IPPROTO_IPV6, using xfrm_af2proto() and correctly reflects the
inner packet's address family.
Fixes: 61fafbee6cfe ("xfrm: Determine inner GSO type from packet inner protocol")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The ERR007885 will lead to a TDAR race condition for mutliQ when the
driver sets TDAR and the UDMA clears TDAR simultaneously or in a small
window (2-4 cycles). And it will cause the udma_tx and udma_tx_arbiter
state machines to hang. Therefore, the commit 53bb20d1faba ("net: fec:
add variable reg_desc_active to speed things up") and the commit
a179aad12bad ("net: fec: ERR007885 Workaround for conventional TX") have
added the workaround to fix the potential issue for the conventional TX
path. Similarly, the XDP TX path should also have the potential hang
issue, so add the workaround for XDP TX path.
Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251128025915.2486943-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Events may fail to open as no supported CPUs were specified on the
command line. In this case a confusing "error" message of "success"
can be reported. Let's skip the error in that case.
Before:
```
$ perf stat -C2048 -e cycles -- true
WARNING: A requested CPU in '2048' is not supported by PMU 'cpu' (CPUs 0-7) for event 'cycles'
Error:
No supported events found.
The sys_perf_event_open() syscall returned with 0 (Success) for event (cpu/unknown-hardware/).
"dmesg | grep -i perf" may provide additional information.
```
After:
```
$ perf stat -C2048 -e cycles -- true
WARNING: A requested CPU in '2048' is not supported by PMU 'cpu' (CPUs 0-7) for event 'cycles'
Error:
No supported events found.
```
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Ensure "--null" does a minimal run.
Reported-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/aSwt7yzFjVJCEmVp@gmail.com/
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
If the perf_cpu_map is empty or is just the any CPU value, then early
return. Don't process the "any" CPU when creating the bitmap.
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Passing an empty map to perf_cpu_map__max triggered a SEGV. Explicitly
test for the empty map.
Reported-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/aSwt7yzFjVJCEmVp@gmail.com/
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It is intended that a "--null" run doesn't open any events.
Fixes: 2cc7aa995ce9 ("perf stat: Refactor retry/skip/fatal error handling")
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Previously, the behavior of the multichannel and max_channels mount
options was inconsistent and order-dependent. For example, specifying
"multichannel,max_channels=1" would result in 2 channels, while
"max_channels=1,multichannel" would result in 1 channel. Additionally,
conflicting combinations such as "nomultichannel,max_channels=3" or
"multichannel,max_channels=1" did not produce errors and could lead to
unexpected channel counts.
This commit introduces two new fields in smb3_fs_context to explicitly
track whether multichannel and max_channels were specified during
mount. The option parsing and validation logic is updated to ensure:
- The outcome is no longer dependent on the order of options.
- Conflicting combinations (e.g., "nomultichannel,max_channels=3" or
"multichannel,max_channels=1") are detected and result in an error.
- The number of channels created is consistent with the specified
options.
This improves the reliability and predictability of mount option
handling for SMB3 multichannel support.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Rajasi Mandal <rajasimandal@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- support timestamps prior to epoch
- do not overwrite uptodate pages
- disable readahead for compressed files
- setting of dummy blocksize to read boot_block when mounting
- the run_lock initialization when loading $Extend
- initialization of allocated memory before use
- support for the NTFS3_IOC_SHUTDOWN ioctl
- check for minimum alignment when performing direct I/O reads
- check for shutdown in fsync
Fixes:
- mount failure for sparse runs in run_unpack()
- use-after-free of sbi->options in cmp_fnames
- KMSAN uninit bug after failed mi_read in mi_format_new
- uninit error after buffer allocation by __getname()
- KMSAN uninit-value in ni_create_attr_list
- double free of sbi->options->nls and ownership of fc->fs_private
- incorrect vcn adjustments in attr_collapse_range()
- mode update when ACL can be reduced to mode
- memory leaks in add sub record
Changes:
- refactor code, updated terminology, spelling
- do not kmap pages in (de)compression code
- after ntfs_look_free_mft(), code that fails must put mft_inode
- default mount options for "acl" and "prealloc"
Replaced:
- use unsafe_memcpy() to avoid memcpy size warning
- ntfs_bio_pages with page cache for compressed files"
* tag 'ntfs3_for_6.19' of https://github.com/Paragon-Software-Group/linux-ntfs3: (26 commits)
fs/ntfs3: check for shutdown in fsync
fs/ntfs3: change the default mount options for "acl" and "prealloc"
fs/ntfs3: Prevent memory leaks in add sub record
fs/ntfs3: out1 also needs to put mi
fs/ntfs3: Fix spelling mistake "recommened" -> "recommended"
fs/ntfs3: update mode in xattr when ACL can be reduced to mode
fs/ntfs3: check minimum alignment for direct I/O
fs/ntfs3: implement NTFS3_IOC_SHUTDOWN ioctl
fs/ntfs3: correct attr_collapse_range when file is too fragmented
ntfs3: fix double free of sbi->options->nls and clarify ownership of fc->fs_private
fs/ntfs3: Initialize allocated memory before use
fs/ntfs3: remove ntfs_bio_pages and use page cache for compressed I/O
ntfs3: avoid memcpy size warning
fs/ntfs3: fix KMSAN uninit-value in ni_create_attr_list
ntfs3: init run lock for extend inode
ntfs: set dummy blocksize to read boot_block when mounting
fs/ntfs3: disable readahead for compressed files
ntfs3: Fix uninit buffer allocated by __getname()
ntfs3: fix uninit memory after failed mi_read in mi_format_new
ntfs3: fix use-after-free of sbi->options in cmp_fnames
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features and improvements for the ext4 file system:
- Optimize online defragmentation by using folios instead of
individual buffer heads
- Improve error codes stored in the superblock when the journal
aborts
- Minor cleanups and clarifications in ext4_map_blocks()
- Add documentation of the casefold and encrypt flags
- Add support for file systems with a blocksize greater than the
pagesize
- Improve performance by enabling the caching the fact that an inode
does not have a Posix ACL
Various Bug Fixes:
- Fix false positive complaints from smatch
- Fix error code which is returned by ext4fs_dirhash() when Siphash
is used without the encryption key
- Fix races when writing to inline data files which could trigger a
BUG
- Fix potential NULL dereference when there is an corrupt file system
with an extended attribute value stored in a inode
- Fix false positive lockdep report when syzbot uses ext4 and ocfs2
together
- Fix false positive reported by DEPT by adjusting lock annotation
- Avoid a potential BUG_ON in jbd2 when a file system is massively
corrupted
- Fix a WARN_ON when superblock is corrupted with a non-NULL
terminated mount options field
- Add check if the userspace passes in a non-NULL terminated mount
options field to EXT4_IOC_SET_TUNE_SB_PARAM
- Fix a potential journal checksum failure whena file system is
copied while it is mounted read-only
- Fix a potential potential orphan file tracking error which only
showed on 32-bit systems
- Fix assertion checks in mballoc (which have to be explicitly enbled
by manually enabling AGGRESSIVE_CHECKS and recompiling)
- Avoid complaining about overly large orphan files created by mke2fs
with with file systems with a 64k block size"
* tag 'ext4_for_linus-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: mark inodes without acls in __ext4_iget()
ext4: enable block size larger than page size
ext4: add checks for large folio incompatibilities when BS > PS
ext4: support verifying data from large folios with fs-verity
ext4: make data=journal support large block size
ext4: support large block size in __ext4_block_zero_page_range()
ext4: support large block size in mpage_prepare_extent_to_map()
ext4: support large block size in mpage_map_and_submit_buffers()
ext4: support large block size in ext4_block_write_begin()
ext4: support large block size in ext4_mpage_readpages()
ext4: rename 'page' references to 'folio' in multi-block allocator
ext4: prepare buddy cache inode for BS > PS with large folios
ext4: support large block size in ext4_mb_init_cache()
ext4: support large block size in ext4_mb_get_buddy_page_lock()
ext4: support large block size in ext4_mb_load_buddy_gfp()
ext4: add EXT4_LBLK_TO_PG and EXT4_PG_TO_LBLK for block/page conversion
ext4: add EXT4_LBLK_TO_B macro for logical block to bytes conversion
ext4: support large block size in ext4_readdir()
ext4: support large block size in ext4_calculate_overhead()
ext4: introduce s_min_folio_order for future BS > PS support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Major withdraw / error handling overhaul based on dlm's new
DLM_RELEASE_RECOVER feature: this allows gfs to treat withdraws like
node failures. Make withdraws asynchronous
- Fix a bug in commit e4a8b5481c59a that caused 'df' to remain out of
sync. ('df' is still allowed to go slightly out of sync for short
periods of time)
- Prevent recusive memory reclaim in gfs2_unstuff_dinode()
- Clean up SDF_JOURNAL_LIVE flag handling
- Fix remote evict for read-only filesystems
- Fix a misuse of bio_chain()
- Various other minor cleanups
* tag 'gfs2-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (35 commits)
gfs2: Fix use of bio_chain
gfs2: Clean up SDF_JOURNAL_LIVE flag handling
gfs2: No longer thaw filesystems during a withdraw
gfs2: Withdraw immediately in gfs2_trans_add_meta
gfs2: New gfs2_withdraw_helper
gfs2: Clean up properly during a withdraw
gfs2: Rename gfs2_{gl_dq_holders => withdraw_glocks}
Revert "gfs2: fix infinite loop when checking ail item count before go_inval"
Revert "gfs2: Allow some glocks to be used during withdraw"
Revert "gfs2: Check for log write errors before telling dlm to unlock"
Revert "gfs2: fix a deadlock on withdraw-during-mount"
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (6/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (5/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (4/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (3/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (2/6)
Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (1/6)
Revert "gfs2: don't stop reads while withdraw in progress"
gfs2: Rename LM_FLAG_{NOEXP -> RECOVER}
gfs2: Kill gfs2_io_error_bh_wd
...
|
|
Pull smb client and server updates from Steve French:
- server fixes:
- IPC use after free locking fix
- fix locking bug in delete paths
- fix use after free in disconnect
- fix underflow in locking check
- error mapping improvement
- socket listening improvement
- return code mapping fixes
- crypto improvements (use default libraries)
- cleanup patches:
- netfs
- client checkpatch cleanup
- server cleanup
- move server/client duplicate code to common code
- fix some defines to better match protocol specification
- smbdirect (RDMA) fixes
- client debugging improvements for leases
* tag 'v6.19-rc-smb-fixes' of git://git.samba.org/ksmbd: (44 commits)
cifs: Use netfs_alloc/free_folioq_buffer()
smb: client: show smb lease key in open_dirs output
smb: client: show smb lease key in open_files output
ksmbd: ipc: fix use-after-free in ipc_msg_send_request
smb: client: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smbd_conn_upcall()
smb: server: relax WARN_ON_ONCE(SMBDIRECT_SOCKET_*) checks in recv_done() and smb_direct_cm_handler()
smb: smbdirect: introduce SMBDIRECT_CHECK_STATUS_{WARN,DISCONNECT}()
smb: smbdirect: introduce SMBDIRECT_DEBUG_ERR_PTR() helper
ksmbd: vfs: fix race on m_flags in vfs_cache
ksmbd: Replace strcpy + strcat to improve convert_to_nt_pathname
smb: move FILE_SYSTEM_ATTRIBUTE_INFO to common/fscc.h
ksmbd: implement error handling for STATUS_INFO_LENGTH_MISMATCH in smb server
ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency
ksmbd: server: avoid busy polling in accept loop
smb: move create_durable_reconn to common/smb2pdu.h
smb: fix some warnings reported by scripts/checkpatch.pl
smb: do some cleanups
smb: move FILE_SYSTEM_SIZE_INFO to common/fscc.h
smb: move some duplicate struct definitions to common/fscc.h
smb: move list of FileSystemAttributes to common/fscc.h
...
|
|
The kernel is now built with -fms-extensions, therefore
generated vmlinux.h contains types like:
struct slab {
..
struct freelist_counters;
};
Use -fms-extensions and -Wno-microsoft-anon-tag flags
to build bpf programs that #include "vmlinux.h"
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull xfs updates from Carlos Maiolino:
"There are no major changes in xfs. This contains mostly some code
cleanups, a few bug fixes and documentation update. Highlights are:
- Quota locking cleanup
- Getting rid of old xlog_in_core_2_t type"
* tag 'xfs-merge-6.19' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (33 commits)
docs: remove obsolete links in the xfs online repair documentation
xfs: move some code out of xfs_iget_recycle
xfs: use zi more in xfs_zone_gc_mount
xfs: remove the unused bv field in struct xfs_gc_bio
xfs: remove xarray mark for reclaimable zones
xfs: remove the xlog_in_core_t typedef
xfs: remove l_iclog_heads
xfs: remove the xlog_rec_header_t typedef
xfs: remove xlog_in_core_2_t
xfs: remove a very outdated comment from xlog_alloc_log
xfs: cleanup xlog_alloc_log a bit
xfs: don't use xlog_in_core_2_t in struct xlog_in_core
xfs: add a on-disk log header cycle array accessor
xfs: add a XLOG_CYCLE_DATA_SIZE constant
xfs: reduce ilock roundtrips in xfs_qm_vop_dqalloc
xfs: move xfs_dquot_tree calls into xfs_qm_dqget_cache_{lookup,insert}
xfs: move quota locking into xrep_quota_item
xfs: move quota locking into xqcheck_commit_dquot
xfs: move q_qlock locking into xqcheck_compare_dquot
xfs: move q_qlock locking into xchk_quota_item
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
- Fix a WARNING caused by a recent FSDAX misdetection regression
- Fix the filesystem stacking limit for file-backed mounts
- Print more informative diagnostics on decompression errors
- Switch the on-disk definition `erofs_fs.h` to the MIT license
- Minor cleanups
* tag 'erofs-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: switch on-disk header `erofs_fs.h` to MIT license
erofs: get rid of raw bi_end_io() usage
erofs: enable error reporting for z_erofs_fixup_insize()
erofs: enable error reporting for z_erofs_stream_switch_bufs()
erofs: improve Zstd, LZMA and DEFLATE error strings
erofs: improve decompression error reporting
erofs: tidy up z_erofs_lz4_handle_overlap()
erofs: limit the level of fs stacking for file-backed mounts
erofs: correct FSDAX detection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs
Pull hfs/hfsplus updates from Viacheslav Dubeyko:
"Several fixes for syzbot reported issues, HFS/HFS+ fixes of xfstests
failures, Kunit-based unit-tests introduction, and code cleanup:
- Dan Carpenter fixed a potential use-after-free issue in
hfs_correct_next_unused_CNID() method. Tetsuo Handa has made nice
fix of syzbot reported issue related to incorrect inode->i_mode
management if volume has been corrupted somehow. Yang Chenzhi has
made really good fix of potential race condition in
__hfs_bnode_create() method for HFS+ file system.
- Several fixes to xfstests failures. Particularly, generic/070,
generic/073, and generic/101 test-cases finish successfully for the
case of HFS+ file system right now.
- HFS and HFS+ drivers share multiple structures of on-disk layout
declarations. Some structures are used without any change. However,
we had two independent declarations of the same structures in HFS
and HFS+ drivers.
The on-disk layout declarations have been moved into
include/linux/hfs_common.h with the goal to exclude the
declarations duplication and to keep the HFS/HFS+ on-disk layout
declarations in one place.
Also, this patch prepares the basis for creating a hfslib that can
aggregate common functionality without necessity to duplicate the
same code in HFS and HFS+ drivers.
- HFS/HFS+ really need unit-tests because of multiple xfstests
failures. The first two patches introduce Kunit-based unit-tests
for the case string operations in HFS/HFS+ file system drivers"
* tag 'hfs-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs:
hfs/hfsplus: move on-disk layout declarations into hfs_common.h
hfsplus: fix volume corruption issue for generic/101
hfsplus: introduce KUnit tests for HFS+ string operations
hfs: introduce KUnit tests for HFS string operations
hfsplus: fix volume corruption issue for generic/073
hfsplus: Verify inode mode when loading from disk
hfsplus: fix volume corruption issue for generic/070
hfs/hfsplus: prevent getting negative values of offset/length
hfsplus: fix missing hfs_bnode_get() in __hfs_bnode_create
hfs: fix potential use after free in hfs_correct_next_unused_CNID()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features:
- shutdown ioctl support (needs CONFIG_BTRFS_EXPERIMENTAL for now):
- set filesystem state as being shut down (also named going down
in other filesystems), where all active operations return EIO
and this cannot be changed until unmount
- pending operations are attempted to be finished but error
messages may still show up depending on where exactly the
shutdown happened
- scrub (and device replace) vs suspend/hibernate:
- a running scrub will prevent suspend, which can be annoying as
suspend is an immediate request and scrub is not critical
- filesystem freezing before suspend was not sufficient as the
problem was in process freezing
- behaviour change: on suspend scrub and device replace are
cancelled, where scrub can record the last state and continue
from there; the device replace has to be restarted from the
beginning
- zone stats exported in sysfs, from the perspective of the
filesystem this includes active, reclaimable, relocation etc zones
Performance:
- improvements when processing space reservation tickets by
optimizing locking and shrinking critical sections, cumulative
improvements in lockstat numbers show +15%
Notable fixes:
- use vmalloc fallback when allocating bios as high order allocations
can happen with wide checksums (like sha256)
- scrub will always track the last position of progress so it's not
starting from zero after an error
Core:
- under experimental config, checksum calculations are offloaded to
process context, simplifies locking and allows to remove
compression write worker kthread(s):
- speed improvement in direct IO throughput with buffered IO
fallback is +15% when not offloaded but this is more related to
internal crypto subsystem improvements
- this will be probably default in the future removing the sysfs
tunable
- (experimental) block size > page size updates:
- support more operations when not using large folios (encoded
read/write and send)
- raid56
- more preparations for fscrypt support
Other:
- more conversions to auto-cleaned variables
- parameter cleanups and removals
- extended warning fixes
- improved printing of structured values like keys
- lots of other cleanups and refactoring"
* tag 'for-6.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (147 commits)
btrfs: remove unnecessary inode key in btrfs_log_all_parents()
btrfs: remove redundant zero/NULL initializations in btrfs_alloc_root()
btrfs: remaining BTRFS_PATH_AUTO_FREE conversions
btrfs: send: do not allocate memory for xattr data when checking it exists
btrfs: send: add unlikely to all unexpected overflow checks
btrfs: reduce arguments to btrfs_del_inode_ref_in_log()
btrfs: remove root argument from btrfs_del_dir_entries_in_log()
btrfs: use test_and_set_bit() in btrfs_delayed_delete_inode_ref()
btrfs: don't search back for dir inode item in INO_LOOKUP_USER
btrfs: don't rewrite ret from inode_permission
btrfs: add orig_logical to btrfs_bio for encryption
btrfs: disable verity on encrypted inodes
btrfs: disable various operations on encrypted inodes
btrfs: remove redundant level reset in btrfs_del_items()
btrfs: simplify leaf traversal after path release in btrfs_next_old_leaf()
btrfs: optimize balance_level() path reference handling
btrfs: factor out root promotion logic into promote_child_to_root()
btrfs: raid56: remove the "_step" infix
btrfs: raid56: enable bs > ps support
btrfs: raid56: prepare finish_parity_scrub() to support bs > ps cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Unify how task_work cancelations are detected, placing it in the
task_work running state rather than needing to check the task state
- Series cleaning up and moving the cancelation code to where it
belongs, in cancel.c
- Cleanup of waitid and futex argument handling
- Add support for mixed sized SQEs. 6.18 added support for mixed sized
CQEs, improving flexibility and efficiency of workloads that need big
CQEs. This adds similar support for SQEs, where the occasional need
for a 128b SQE doesn't necessitate having all SQEs be 128b in size
- Introduce zcrx and SQ/CQ layout queries. The former returns what zcrx
features are available. And both return the ring size information to
help with allocation size calculation for user provided rings like
IORING_SETUP_NO_MMAP and IORING_MEM_REGION_TYPE_USER
- Zcrx updates for 6.19. It includes a bunch of small patches,
IORING_REGISTER_ZCRX_CTRL and RQ flushing and David's work on sharing
zcrx b/w multiple io_uring instances
- Series cleaning up ring initializations, notable deduplicating ring
size and offset calculations. It also moves most of the checking
before doing any allocations, making the code simpler
- Add support for getsockname and getpeername, which is mostly a
trivial hookup after a bit of refactoring on the networking side
- Various fixes and cleanups
* tag 'for-6.19/io_uring-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring: Introduce getsockname io_uring cmd
socket: Split out a getsockname helper for io_uring
socket: Unify getsockname and getpeername implementation
io_uring/query: drop unused io_handle_query_entry() ctx arg
io_uring/kbuf: remove obsolete buf_nr_pages and update comments
io_uring/register: use correct location for io_rings_layout
io_uring/zcrx: share an ifq between rings
io_uring/zcrx: add io_fill_zcrx_offsets()
io_uring/zcrx: export zcrx via a file
io_uring/zcrx: move io_zcrx_scrub() and dependencies up
io_uring/zcrx: count zcrx users
io_uring/zcrx: add sync refill queue flushing
io_uring/zcrx: introduce IORING_REGISTER_ZCRX_CTRL
io_uring/zcrx: elide passing msg flags
io_uring/zcrx: use folio_nr_pages() instead of shift operation
io_uring/zcrx: convert to use netmem_desc
io_uring/query: introduce rings info query
io_uring/query: introduce zcrx query
io_uring: move cq/sq user offset init around
io_uring: pre-calculate scq layout
...
|
|
__blkdev_issue_discard() always returns 0, making the error assignment
in __submit_discard_cmd() dead code.
Initialize err to 0 and remove the error assignment from the
__blkdev_issue_discard() call to err. Move fault injection code into
already present if branch where err is set to -EIO.
This preserves the fault injection behavior while removing dead error
handling.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch optimizes the tracepoint by replacing these hardcoded strings
with a new enumeration f2fs_cp_phase.
1.Defines enum f2fs_cp_phase with values for each checkpoint phase.
2.Updates trace_f2fs_write_checkpoint to accept a u16 phase argument
instead of a string pointer.
3.Uses __print_symbolic in TP_printk to convert the enum values
back to their corresponding strings for human-readable trace output.
This change reduces the storage overhead for each trace event
by replacing a variable-length string with a 2-byte integer,
while maintaining the same readable output in ftrace.
Signed-off-by: YH Lin <yhli@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
w/ LFS mode, in get_left_section_blocks(), we should not account the
blocks which were used before and now are invalided, otherwise those
blocks will be counted as freed one in has_curseg_enough_space(), result
in missing to trigger GC in time.
Cc: stable@kernel.org
Fixes: 249ad438e1d9 ("f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.")
Fixes: bf34c93d2645 ("f2fs: check curseg space before foreground GC")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
cat /sys/kernel/debug/f2fs/status
Main area: 17 segs, 17 secs 17 zones
TYPE blkoff segno secno zoneno dirty_seg full_seg valid_blk
- COLD data: 0 4 4 4 0 0 0
- WARM data: 0 7 7 7 0 0 0
- HOT data: 1 5 5 5 2 0 512
- Dir dnode: 3 0 0 0 1 0 2
- File dnode: 0 1 1 1 0 0 0
- Indir nodes: 0 2 2 2 0 0 0
- Pinned file: 0 -1 -1 -1
- ATGC data: 0 -1 -1 -1
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Sphinx's LaTeX builder fails when converting the nested ASCII tables in
f2fs.rst, producing the following error:
"Markup is unsupported in LaTeX: longtable does not support nesting a table."
Wrap the affected ASCII tables in literal code blocks to force Sphinx to
render them verbatim. This prevents nested longtables and fixes the PDF
build failure on Sphinx 8.2.x.
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Masaharu Noguchi <nogunix@gmail.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
opt field in structure f2fs_mount_info and opt_mask field in structure
f2fs_fs_context is 32-bits variable, now we're running out of available
bits in them, let's expand them to 64-bits for better scalability.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch changes default schedule timeout value from 20ms to 1ms,
in order to give caller more chances to check whether IO or non-IO
congestion condition has already been mitigable.
In addition, default interval of periodical discard submission is
kept to 20ms.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs retry logic, we will call f2fs_io_schedule_timeout() to sleep as
uninterruptible state (waiting for IO) for a while, however, in several
paths below, we are not blocked by IO:
- f2fs_write_single_data_page() return -EAGAIN due to racing on cp_rwsem.
- f2fs_flush_device_cache() failed to submit preflush command.
- __issue_discard_cmd_range() sleeps periodically in between two in batch
discard submissions.
So, in order to reveal state of task more accurate, let's introduce
f2fs_schedule_timeout() and call it in above paths in where we are waiting
for non-IO reasons.
Then we can get real reason of uninterruptible sleep for a thread in
tracepoint, perfetto, etc.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
memalloc_retry_wait() is recommended in memory allocation retry logic,
use it as much as possible.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds a sysfs entry showing the max zones that F2FS can write
concurrently.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The usage of unusable_blocks_per_sec is already wrapped by
CONFIG_BLK_DEV_ZONED, except for its declaration and the definitions of
CAP_BLKS_PER_SEC and CAP_SEGS_PER_SEC. This patch ensures that all code
related to unusable_blocks_per_sec is properly wrapped under the
CONFIG_BLK_DEV_ZONED option.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_recover_fsync_data(),use LIST_HEAD() to declare and
initialize the list_head in one step instead of using
INIT_LIST_HEAD() separately.
No functional change.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The recent increase in the number of Segment Summary Area (SSA) entries
from 512 to 2048 was an unintentional change in logic of 16kb block
support. This commit corrects the issue.
To better utilize the space available from the erroneous 2048-entry
calculation, we are implementing a solution to share the currently
unused SSA space with neighboring segments. This enhances overall
SSA utilization without impacting the established 8MB segment size.
Fixes: d7e9a9037de2 ("f2fs: Support Block Size == Page Size")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync # avoid CP_UMOUNT_FLAG in last f2fs_checkpoint.ckpt_flags
touch /mnt/f2fs/bar
f2fs_io fsync /mnt/f2fs/bar
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
blockdev --setro /dev/vdd
mount /dev/vdd /mnt/f2fs
mount: /mnt/f2fs: WARNING: source write-protected, mounted read-only.
For the case if we create and fsync a new inode before sudden power-cut,
without norecovery or disable_roll_forward mount option, the following
mount will succeed w/o recovering last fsynced inode.
The problem here is that we only check inode_list list after
find_fsync_dnodes() in f2fs_recover_fsync_data() to find out whether
there is recoverable data in the iamge, but there is a missed case, if
last fsynced inode is not existing in last checkpoint, then, we will
fail to get its inode due to nat of inode node is not existing in last
checkpoint, so the inode won't be linked in inode_list.
Let's detect such case in dyrun mode to fix this issue.
After this change, mount will fail as expected below:
mount: /mnt/f2fs: cannot mount /dev/vdd read-only.
dmesg(1) may have more information after failed mount system call.
demsg:
F2FS-fs (vdd): Need to recover fsync data, but write access unavailable, please try mount w/ disable_roll_forward or norecovery
Cc: stable@kernel.org
Fixes: 6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
With below scripts, it will trigger panic in f2fs:
mkfs.f2fs -f /dev/vdd
mount /dev/vdd /mnt/f2fs
touch /mnt/f2fs/foo
sync
echo 111 >> /mnt/f2fs/foo
f2fs_io fsync /mnt/f2fs/foo
f2fs_io shutdown 2 /mnt/f2fs
umount /mnt/f2fs
mount -o ro,norecovery /dev/vdd /mnt/f2fs
or
mount -o ro,disable_roll_forward /dev/vdd /mnt/f2fs
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
F2FS-fs (vdd): Mounted with checkpoint version = 7f5c361f
F2FS-fs (vdd): Stopped filesystem due to reason: 0
F2FS-fs (vdd): f2fs_recover_fsync_data: recovery fsync data, check_only: 1
Filesystem f2fs get_tree() didn't set fc->root, returned 1
------------[ cut here ]------------
kernel BUG at fs/super.c:1761!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 722 Comm: mount Not tainted 6.18.0-rc2+ #721 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vfs_get_tree.cold+0x18/0x1a
Call Trace:
<TASK>
fc_mount+0x13/0xa0
path_mount+0x34e/0xc50
__x64_sys_mount+0x121/0x150
do_syscall_64+0x84/0x800
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fa6cc126cfe
The root cause is we missed to handle error number returned from
f2fs_recover_fsync_data() when mounting image w/ ro,norecovery or
ro,disable_roll_forward mount option, result in returning a positive
error number to vfs_get_tree(), fix it.
Cc: stable@kernel.org
Fixes: 6781eabba1bd ("f2fs: give -EINVAL for norecovery and rw mount")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This adds a tracepoint in the fadvise call path.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The age extent cache uses last_blocks (derived from
allocated_data_blocks) to determine data age. However, there's a
conflict between the deletion
marker (last_blocks=0) and legitimate last_blocks=0 cases when
allocated_data_blocks overflows to 0 after reaching ULLONG_MAX.
In this case, valid extents are incorrectly skipped due to the
"if (!tei->last_blocks)" check in __update_extent_tree_range().
This patch fixes the issue by:
1. Reserving ULLONG_MAX as an invalid/deletion marker
2. Limiting allocated_data_blocks to range [0, ULLONG_MAX-1]
3. Using F2FS_EXTENT_AGE_INVALID for deletion scenarios
4. Adjusting overflow age calculation from ULLONG_MAX to (ULLONG_MAX-1)
Reproducer (using a patched kernel with allocated_data_blocks
initialized to ULLONG_MAX - 3 for quick testing):
Step 1: Mount and check initial state
# dd if=/dev/zero of=/tmp/test.img bs=1M count=100
# mkfs.f2fs -f /tmp/test.img
# mkdir -p /mnt/f2fs_test
# mount -t f2fs -o loop,age_extent_cache /tmp/test.img /mnt/f2fs_test
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551612 # ULLONG_MAX - 3
Inner Struct Count: tree: 1(0), node: 0
Step 2: Create files and write data to trigger overflow
# touch /mnt/f2fs_test/{1,2,3,4}.txt; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551613 # ULLONG_MAX - 2
Inner Struct Count: tree: 5(0), node: 1
# dd if=/dev/urandom of=/mnt/f2fs_test/1.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551614 # ULLONG_MAX - 1
Inner Struct Count: tree: 5(0), node: 2
# dd if=/dev/urandom of=/mnt/f2fs_test/2.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 18446744073709551615 # ULLONG_MAX
Inner Struct Count: tree: 5(0), node: 3
# dd if=/dev/urandom of=/mnt/f2fs_test/3.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 0 # Counter overflowed!
Inner Struct Count: tree: 5(0), node: 4
Step 3: Trigger the bug - next write should create node but gets skipped
# dd if=/dev/urandom of=/mnt/f2fs_test/4.txt bs=4K count=1; sync
# cat /sys/kernel/debug/f2fs/status | grep -A 4 "Block Age"
Allocated Data Blocks: 1
Inner Struct Count: tree: 5(0), node: 4
Expected: node: 5 (new extent node for 4.txt)
Actual: node: 4 (extent insertion was incorrectly skipped due to
last_blocks = allocated_data_blocks = 0 in __get_new_block_age)
After this fix, the extent node is correctly inserted and node count
becomes 5 as expected.
Fixes: 71644dff4811 ("f2fs: add block_age-based extent cache")
Cc: stable@kernel.org
Signed-off-by: Xiaole He <hexiaole1994@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Add check for inode->i_nlink == 1 for directories during unlink,
as their value is decremented twice, which can trigger a warning in
drop_nlink. In such case mark the filesystem as corrupted and return
from the function call with the relevant failure return value.
Additionally add the check for i_nlink == 1 in
sanity_check_inode in order to detect on-disk corruption early.
Reported-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c07d47c7bc68f47b9083
Tested-by: syzbot+c07d47c7bc68f47b9083@syzkaller.appspotmail.com
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Rename "fail" label to "out" as it's used as a default
exit path out of f2fs_unlink as well as error path.
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When F2FS uses multiple block devices, each device may have a
different discard granularity. The minimum trim granularity must be
at least the maximum discard granularity of all devices, excluding
zoned devices. Use max_t instead of the max() macro to compute the
maximum value.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|