| Age | Commit message (Collapse) | Author |
|---|
|
The tegra210_ahub driver started triggering a warning after commit
e062bdfdd6ad ("regmap: warn users about uninitialized flat cache"),
which flags drivers using REGCACHE_FLAT without register defaults.
Since the driver omits default definitions because its registers are
zero initialized, the following warning is shown:
WARNING KERN tegra210-ahub 2900800.ahub: using zero-initialized flat cache, this may cause unexpected behavior
Switch to REGCACHE_FLAT_S which is the recommended cache type for
sparse register maps without defaults. This cache type initializes
entries on-demand from hardware, eliminating the warning while using
memory efficiently.
Signed-off-by: sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20251208052040.4025612-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull 6.19-devel branch for further development
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that all in-tree seq drivers are converted to bus methods, let
old-style drivers fails to probe until driver methods are removed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/10adbd12b75984f6fd45e281438d475735cf5fdb.1765283601.git.u.kleine-koenig@baylibre.com
|
|
The snd_seq bus got a dedicated probe function. Make use of that. This
fixes a runtime warning about the driver needing to be converted to the
bus probe method.
Note that the remove callback returns void now. The actual return value
was ignored before (see device_remove() in drivers/base/dd.c), so there
is no problem introduced by converting `return -EINVAL` to `return`.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/affb5a7107e9d678ce85dc7f0b87445928cd6b94.1765283601.git.u.kleine-koenig@baylibre.com
|
|
The snd_seq bus got a dedicated probe function. Make use of that. This
fixes a runtime warning about the driver needing to be converted to the
bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/31d351fc844348eac0955db8db78c19a0c23d888.1765283601.git.u.kleine-koenig@baylibre.com
|
|
The snd_seq bus got a dedicated probe function. Make use of that. This
fixes a runtime warning about the driver needing to be converted to the
bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/ccaf10073a6e8a68ea751bfc0e8aae1c66b57458.1765283601.git.u.kleine-koenig@baylibre.com
|
|
The snd_seq bus got a dedicated probe function. Make use of that. This
fixes a runtime warning about the driver needing to be converted to the
bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/15cd19c9c8ec32e92b956eec112e515335bc22cf.1765283601.git.u.kleine-koenig@baylibre.com
|
|
The snd_seq bus got a dedicated probe function. Make use of that. This
fixes a runtime warning about the driver needing to be converted to the
bus probe method.
Note that the remove callback returns void now. The actual return value
was ignored before (see device_remove() in drivers/base/dd.c), so there
is no problem introduced by converting `return -EINVAL` to `return`.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/fb5e44d995cf93b8feae22c4558598859712bc07.1765283601.git.u.kleine-koenig@baylibre.com
|
|
The snd_seq bus got a dedicated probe function. Make use of that. This
fixes a runtime warning about the driver needing to be converted to the
bus probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/054f1a0536228ccfe5f539ce854804f789f2ee64.1765283601.git.u.kleine-koenig@baylibre.com
|
|
The snd_seq bus got a dedicated probe function. Make use of that. This
fixes a runtime warning about the driver needing to be converted to the
bus probe method.
Note that the remove callback returns void now. The actual return value
was ignored before (see device_remove() in drivers/base/dd.c), so there
is no problem introduced by converting `return -ENODEV` to `return`.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/054ae56db6b55eea60c8aa8f9633e8d3d180cb09.1765283601.git.u.kleine-koenig@baylibre.com
|
|
Introduce a bus specific probe and remove function. For now this only
allows to get rid of a cast of the generic device to an snd_seq device
in the drivers and changes the remove prototype to return void---a
non-zero return value is ignored anyhow.
The objective is to get rid of users of struct device callbacks
.probe(), .remove() and .shutdown() to eventually remove these. Until
all snd_seq drivers are converted this results in a runtime warning
about the drivers needing an update because there is a bus probe
function and a driver probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/f36b01b297fc5cbb6d0ed4959143add0c13eec99.1765283601.git.u.kleine-koenig@baylibre.com
|
|
The logic to fallback to the return address (RA) register value in
the topmost frame when stack tracing using back chain is broken in
multiple ways:
When assuming the RA register 14 has not been saved yet one must assume
that a new user stack frame has not been allocated either. Therefore
the back chain would not contain the stack pointer (SP) at entry, but
the caller's SP at its entry instead.
Therefore when falling back to the RA register 14 value it would also be
necessary to fallback to the SP register 15 value. Otherwise an invalid
combination of RA register 14 and caller's SP at its entry (from the
back chain) is used.
In the topmost frame the back chain contains either the caller's SP at
its entry (before having allocated a new stack frame in the prologue),
the SP at entry (after having allocated a new stack frame), or an
uninitialized value (during static/dynamic stack allocation). In both
cases where the back chain is valid either the caller or prologue must
have saved its respective RA to the respective frame. Therefore, if the
RA obtained from the frame pointed to by the back chain is invalid, this
does not indicate that the IP in the topmost frame is still early in the
prologue and the RA has not been saved.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When checking `arch/s390/pci/pci.c` with `sparse` during build, the
following complaint is reported:
arch/s390/pci/pci.c: note: in included file (through include/linux/smp.h, include/linux/lockdep.h, include/linux/spinlock.h, include/linux/mmzone.h, include/linux/gfp.h, include/linux/slab.h):
./include/linux/list.h:237:25: warning: context imbalance in 'zpci_release_device' - unexpected unlock
But this is expected, as zpci_release_device() is expected to be called
with `zpci_list_lock` held, as part of `kref_put_lock()` or similar.
Reflect this by annotating the function with the appropriate
__releases().
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When triggering PCI device recovery by writing into the SysFS attribute
`recover` of a Physical Function with existing child SR-IOV Virtual
Functions, lockdep is reporting a possible deadlock between three
threads:
Thread (A) Thread (B) Thread (C)
| | |
recover_store() zpci_scan_devices() zpci_scan_devices()
lock(pci_rescan_remove_lock) | |
| | |
| | zpci_bus_scan_busses()
| | lock(zbus_list_lock)
| zpci_add_device() |
| lock(zpci_add_remove_lock) |
| | ┴
| | zpci_bus_scan_bus()
| | lock(pci_rescan_remove_lock)
┴ |
zpci_zdev_put() |
lock(zpci_add_remove_lock) |
┴
zpci_bus_get()
lock(zbus_list_lock)
In zpci_bus_scan_busses() the `zbus_list_lock` is taken for the whole
duration of the function, which also includes taking
`pci_rescan_remove_lock`, among other things. But `zbus_list_lock` only
really needs to protect the modification of the global registration
`zbus_list`, it can be dropped while the functions within the list
iteration run; this way we break the cycle above.
Break up zpci_bus_scan_busses() into an "iterator" zpci_bus_get_next()
that iterates over `zbus_list` element by element, and acquires and
releases `zbus_list_lock` as necessary, but never keep holding it.
References to `zpci_bus` objects are also acquired and released.
The reference counting on `zpci_bus` objects is also changed so that all
put() and get() operations are done under the protection of
`zbus_list_lock`, and if the operation results in a modification of
`zpci_bus_list`, this modification is done in the same critical section
(apart the very first initialization). This way objects are never seen
on the list that are about to be released and/or half-initialized.
Fixes: 14c87ba8123a ("s390/pci: separate zbus registration from scanning")
Suggested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With z16 a new flag 'search boot program' was introduced for
list-directed IPL (SCSI, NVMe, ECKD DASD). If this flag is set,
e.g. via selecting the "Automatic" value for the "Boot program
selector" control on an HMC load panel, it is copied to the reipl
structure from the initial ipl structure. When a user now sets a
boot prog via sysfs, the flag is not cleared and the bootloader
will again automatically select the boot program, ignoring user
configuration.
To avoid that, clear the SBP flag when a bootprog sysfs file is
written.
Cc: stable@vger.kernel.org
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With the eventual goal to drop .probe(), .remove() and .shutdown() from
struct device_driver, convert the fsl bus to use bus methods.
Other than a driver's shutdown callback the bus shutdown callback is
also called for unbound drivers. So check for the device being bound
before following the pointer to its driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/848fffe5c479d899c04a4c99ccb5f0128ccc942d.1764684327.git.u.kleine-koenig@baylibre.com
Link: https://lore.kernel.org/r/20251209115950.3382308-2-u.kleine-koenig@baylibre.com
[chleroy: squashed the two patches]
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
The driver core already emits an error message when probe fails, see
call_driver_probe() in drivers/base/dd.c. So drop the duplicated error
message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/52c89497f78839446713a9c5456defce97a74c7d.1764684327.git.u.kleine-koenig@baylibre.com
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
|
|
Make sure to drop the reference taken when looking up the UDMA platform
device.
Note that holding a reference to a platform device does not prevent its
driver data from going away so there is no point in keeping the
reference after the lookup helper returns.
Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Fixes: 1438cde8fe9c ("dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get()")
Cc: stable@vger.kernel.org # 5.6: 1438cde8fe9c
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-17-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use a common exit path to drop the cross platform device reference on
errors for consistency with am335x.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-16-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the crossbar
platform device during am335x route allocation.
Fixes: 42dbdcc6bf96 ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Cc: stable@vger.kernel.org # 4.4
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-15-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the crossbar
platform device during dra7x route allocation.
Note that commit 615a4bfc426e ("dmaengine: ti: Add missing put_device in
ti_dra7_xbar_route_allocate") fixed the leak in the error paths but the
reference is still leaking on successful allocation.
Fixes: a074ae38f859 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
Fixes: 615a4bfc426e ("dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate")
Cc: stable@vger.kernel.org # 4.2: 615a4bfc426e
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-14-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Error labels should be named after what they do (and not after wherefrom
they are jumped to).
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-13-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Fixes: df7e762db5f6 ("dmaengine: Add STM32 DMAMUX driver")
Cc: stable@vger.kernel.org # 4.15
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-12-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: df7e762db5f6 ("dmaengine: Add STM32 DMAMUX driver")
Cc: stable@vger.kernel.org # 4.15
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-11-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the ICU device
during probe also on probe failures (e.g. probe deferral).
Fixes: 7de873201c44 ("dmaengine: sh: rz-dmac: Add RZ/V2H(P) support")
Cc: stable@vger.kernel.org # 6.16
Cc: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://patch.msgid.link/20251117161258.10679-10-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 5d318b595982 ("dmaengine: Add dma router for pl08x in LPC32XX SoC")
Cc: stable@vger.kernel.org # 6.12
Cc: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251117161258.10679-9-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: e5f4ae84be74 ("dmaengine: add driver for lpc18xx dmamux")
Cc: stable@vger.kernel.org # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251117161258.10679-8-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the idxd device as
part of the compat bind and unbind sysfs interface.
Fixes: 6e7f3ee97bbe ("dmaengine: idxd: move dsa_drv support to compatible mode")
Cc: stable@vger.kernel.org # 5.15
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-7-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Fixes: 134d9c52fca2 ("dmaengine: dw: dmamux: Introduce RZN1 DMA router support")
Cc: stable@vger.kernel.org # 5.19
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251117161258.10679-6-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: db7d07b5add4 ("dmaengine: add driver for Sophgo CV18XX/SG200X dmamux")
Cc: stable@vger.kernel.org # 6.17
Cc: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-5-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the mailbox device
during probe on probe failures and on driver unbind.
Fixes: 743e1c8ffe4e ("dmaengine: Add Broadcom SBA RAID driver")
Cc: stable@vger.kernel.org # 4.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make sure to drop the reference taken when looking up the DMA platform
device during of_dma_xlate() when releasing channel resources.
Note that commit 3832b78b3ec2 ("dmaengine: at_hdmac: add missing
put_device() call in at_dma_xlate()") fixed the leak in a couple of
error paths but the reference is still leaking on successful allocation.
Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Fixes: 3832b78b3ec2 ("dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()")
Cc: stable@vger.kernel.org # 3.10: 3832b78b3ec2
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The max_register field is assigned the size of the register memory
region instead of the offset of the last register.
The result is that reading from the regmap via debugfs can cause
a segmentation fault:
tail /sys/kernel/debug/regmap/xdma.1.auto/registers
Unable to handle kernel paging request at virtual address ffff800082f70000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
[...]
Call trace:
regmap_mmio_read32le+0x10/0x30
_regmap_bus_reg_read+0x74/0xc0
_regmap_read+0x68/0x198
regmap_read+0x54/0x88
regmap_read_debugfs+0x140/0x380
regmap_map_read_file+0x30/0x48
full_proxy_read+0x68/0xc8
vfs_read+0xcc/0x310
ksys_read+0x7c/0x120
__arm64_sys_read+0x24/0x40
invoke_syscall.constprop.0+0x64/0x108
do_el0_svc+0xb0/0xd8
el0_svc+0x38/0x130
el0t_64_sync_handler+0x120/0x138
el0t_64_sync+0x194/0x198
Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
note: tail[1217] exited with irqs disabled
note: tail[1217] exited with preempt_count 1
Segmentation fault
Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The driver's existing logic for setting the DMA mask for "marvell,pdma-1.0"
was flawed. It incorrectly relied on pdev->dev->coherent_dma_mask instead
of declaring the hardware's fixed addressing capability. A cleaner and
more correct approach is to define the mask directly based on the hardware
limitations.
The MMP/PXA PDMA controller is a 32-bit DMA engine. This is supported by
datasheets and various dtsi files for PXA25x, PXA27x, PXA3xx, and MMP2,
all of which are 32-bit systems.
This patch simplifies the driver's logic by replacing the 'u64 dma_mask'
field with a simpler 'u32 dma_width' to store the addressing capability
in bits. The complex if/else block in probe() is then replaced with a
single, clear call to dma_set_mask_and_coherent(). This sets a fixed
32-bit DMA mask for "marvell,pdma-1.0" and a 64-bit mask for
"spacemit,k1-pdma," matching each device's hardware capabilities.
Finally, this change also works around a specific build error encountered
with clang-20 on x86_64 allyesconfig. The shift-count-overflow error is
caused by a known clang compiler issue where the DMA_BIT_MASK(n) macro's
ternary operator is not correctly evaluated in static initializers. By
moving the macro's evaluation into the probe() function, the driver avoids
this compiler bug.
Fixes: 5cfe585d8624 ("dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/lkml/CA+G9fYsPcMfW-e_0_TRqu4cnwqOqYF3aJOeKUYk6Z4qRStdFvg@mail.gmail.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Besides formatting changes, this logic dates back to Linux 2.4.0-test11 in
November 2000.
Prior to "Massive cleanup of CPU detection and bug handling",
c->x86_capability was a single u32 containing cpuid(1).edx,
cpuid(0x80000001).edx, or a synthesis thereof. X86_FEATURE_AMD3D was
defined as the top bit this single u32.
After "Massive cleanup of CPU detection and bug handling",
c->x86_capability became an array with AMD's extended feature leaf split
away from Intel's basic feature leaf.
AMD doc #20734-G states that 3DNow is only enumerated in the extended
feature leaf, and that other vendors where using this bit too. i.e. AMD
never produced a CPU which set bit 31 in the basic leaf, meaning that
there's nothing to clear out in the first place.
This logic looks like it was relevant in the pre-"Massive cleanup" world
but ought to have been dropped when c->x86_capability was properly split.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Pu Wen <puwen@hygon.cn>
Link: https://patch.msgid.link/20251126125147.880275-1-andrew.cooper3@citrix.com
|
|
... to simplify the result.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20251126113442.877024-1-andrew.cooper3@citrix.com
|
|
The good revisions are tied to exact steppings, meaning it's not valid to
match on model number alone, let alone a range.
This is probably only a latent issue. From public microcode archives, the
following CPUs exist 17-30-00, 17-60-00, 17-70-00 and would be captured by the
model ranges. They're likely pre-production steppings, and likely didn't get
Zenbleed microcode, but it's still incorrect to compare them to a different
steppings revision.
Either way, convert the logic to use x86_match_min_microcode_rev(), which is
the preferred mechanism.
Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: x86@kernel.org
Link: https://patch.msgid.link/20251126130352.880424-1-andrew.cooper3@citrix.com
|
|
The property is not specified by the binding, nor used by the driver.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Changing the compatible changes the properties allowed -
snps,dw-apb-uart doesn't specify no-loopback-test, so remove it.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
There's neither a binding defined nor a driver that matches on the
compatible, so drop it from the devicetree until someone is motivated to
solve the problems.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Its presence is not required by the binding, its addition was not
discussed in commit aac82707fa45 ("ARM: dts: aspeed: Add AST2600 EDAC
into common devicetree"), and its inconsistent with the g4 and g5
dtsis.
Further, the corresponding driver instantiates its own regmap rather
than fetching the syscon regmap, in theory breaking any users of the
syscon, but of which there appear to be none in-tree.
Drop it for now, and we can add it back with the necessary rework if
it's ever required.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
While sdhci-pltfm supports sdhci,wp-inverted, it also supports
the un-prefixed and specified wp-inverted property. Switch the EVB
devicetree to use the specified property to remove warnings when
checking the DTB.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
The property isn't specified in the bindings and is not used by the
corresponding driver, so drop it.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
The NVIDIA MSX4 HPM (host platform module) is a reference board for
managing up to 8 PCIe connected NVIDIA GPUs via ConnectX-8 (CX8)
SuperNICs. The BMC manages all GPUs and CX8s for both telemetry and
firmware update via MCTP over USB. The host CPUs are dual socket Intel
Granite Rapids processors.
For more detail on this architecture:
https://developer.nvidia.com/blog/nvidia-connectx-8-supernics-advance-ai-platform-architecture-with-pcie-gen6-connectivity/
Signed-off-by: Marc Olberding <molberding@nvidia.com>
Link: https://patch.msgid.link/20251126-msx1_devicetree-v5-2-e508d13e2dda@nvidia.com
[arj: Reflow text to wrap at limit, whitespace, grammar]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Adds a compatible string for NVIDIA's MSX4 BMC board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Olberding <molberding@nvidia.com>
Link: https://patch.msgid.link/20251126-msx1_devicetree-v5-1-e508d13e2dda@nvidia.com
[arj: Consistent capitalisation in subject, grammar]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
The gpio-leds driver requires all GPIOs in a group to be available;
if any GPIO in the group is not available the whole group will not be
created. The hdd_led GPIO is only present after standby power is
enabled, which can prevent other LEDs in the same group from being
created and blocks properly setting 'bmc_ready_noled'.
Move the 'hdd_led' node into a separate gpio-leds group so that other
LEDs are not blocked and the 'bmc_ready_noled' flag can be set
correctly.
Fixes: b5dd16228216 ("ARM: dts: aspeed: clemente: Add HDD LED GPIO")
Signed-off-by: Alex Wang <alex.ts.wang@fii-foxconn.com>
Link: https://patch.msgid.link/20251127-leo-dts-add-shunt-resistor-v2-1-c77dfbfb826c@fii-foxconn.com
[arj: Fix patch subject, add Fixes: tag]
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
The chassis power cycle process requires a forced shutdown before
cutting off the standby power. The SCM CPLD implements a hard shutdown
host function that is controlled through the IO expander in the
Clemente platform.
This change adds a new GPIO line named "shdn_force_l_cpld" to the
PCA9555 IO expander's gpio-line-names at index 10. When asserted,
this GPIO signals the CPLD to pull the HPM's SHDN_FORCE_L pin low,
which triggers a forced host shutdown.
Signed-off-by: Kimi Chen <kimi.zy.chen@fii-foxconn.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Add an IPMB node for OCP debug card to support IPMI communication.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Add IO expander emulated by the switch board CPLD to handle UART and SPI
mux control signals. Also add SGPIO labels with FM_MODULE_PWR_EN_N_*
signals, which control power to each ASIC module individually.
Signed-off-by: Fred Chen <fredchen.openbmc@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
|
Add EEPROM devices on the I2C buses used for the boot and data NVMe
drives. These EEPROMs store FRU information for each drive, allowing
the BMC to identify.
Signed-off-by: Leo Wang <leo.jt.wang@gmail.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
