| Age | Commit message (Collapse) | Author |
|---|
|
Document the Last Level Cache Controller on Glymur SoC
Glymur LLCC has 12 base register regions and an additional AND, OR
broadcast region, total 14 register regions
Increase maxItems for reg and reg-names to allow 14 entries for Glymur
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251211-glymur_llcc_enablement-v3-1-43457b354b0d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Previously, btrfs_get_or_create_delayed_node() set the delayed_node's
refcount before acquiring the root->delayed_nodes lock.
Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes")
moved refcount_set inside the critical section, which means there is
no longer a memory barrier between setting the refcount and setting
btrfs_inode->delayed_node.
Without that barrier, the stores to node->refs and
btrfs_inode->delayed_node may become visible out of order. Another
thread can then read btrfs_inode->delayed_node and attempt to
increment a refcount that hasn't been set yet, leading to a
refcounting bug and a use-after-free warning.
The fix is to move refcount_set back to where it was to take
advantage of the implicit memory barrier provided by lock
acquisition.
Because the allocations now happen outside of the lock's critical
section, they can use GFP_NOFS instead of GFP_ATOMIC.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202511262228.6dda231e-lkp@intel.com
Fixes: e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes")
Tested-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.2629] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[87.2637] CR2: 00007ffc9ec33b98 CR3: 000000011273e003 CR4: 0000000000370ef0
[87.2648] Call Trace:
[87.2651] <TASK>
[87.2654] btrfs_unlink_inode+0x15/0x40 [btrfs]
[87.2661] unlink_inode_for_log_replay+0x27/0xf0 [btrfs]
[87.2669] check_item_in_log+0x1ea/0x2c0 [btrfs]
[87.2676] replay_dir_deletes+0x16b/0x380 [btrfs]
[87.2684] fixup_inode_link_count+0x34b/0x370 [btrfs]
[87.2696] fixup_inode_link_counts+0x41/0x160 [btrfs]
[87.2703] btrfs_recover_log_trees+0x1ff/0x7c0 [btrfs]
[87.2711] ? __pfx_replay_one_buffer+0x10/0x10 [btrfs]
[87.2719] open_ctree+0x10bb/0x15f0 [btrfs]
[87.2726] btrfs_get_tree.cold+0xb/0x16c [btrfs]
[87.2734] ? fscontext_read+0x15c/0x180
[87.2740] ? rw_verify_area+0x50/0x180
[87.2746] vfs_get_tree+0x25/0xd0
[87.2750] vfs_cmd_create+0x59/0xe0
[87.2755] __do_sys_fsconfig+0x4f6/0x6b0
[87.2760] do_syscall_64+0x50/0x1220
[87.2764] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[87.2770] RIP: 0033:0x7f7b9625f4aa
[87.2775] Code: 73 01 c3 48 (...)
[87.2803] RSP: 002b:00007ffc9ec35b08 EFLAGS: 00000246 ORIG_RAX: 00000000000001af
[87.2817] RAX: ffffffffffffffda RBX: 0000558bfa91ac20 RCX: 00007f7b9625f4aa
[87.2829] RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003
[87.2842] RBP: 0000558bfa91b120 R08: 0000000000000000 R09: 0000000000000000
[87.2854] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[87.2864] R13: 00007f7b963f1580 R14: 00007f7b963f326c R15: 00007f7b963d8a23
[87.2877] </TASK>
[87.2882] ---[ end trace 0000000000000000 ]---
[87.2891] BTRFS: error (device dm-0 state A) in __btrfs_unlink_inode:4345: errno=-2 No such entry
[87.2904] BTRFS: error (device dm-0 state EAO) in do_abort_log_replay:191: errno=-2 No such entry
[87.2915] BTRFS critical (device dm-0 state EAO): log tree (for root 5) leaf currently being processed (slot 7 key (258 12 257)):
[87.2929] BTRFS info (device dm-0 state EAO): leaf 30736384 gen 10 total ptrs 7 free space 15712 owner 18446744073709551610
[87.2929] BTRFS info (device dm-0 state EAO): refs 3 lock_owner 0 current 638968
[87.2929] item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160
[87.2929] inode generation 9 transid 10 size 0 nbytes 0
[87.2929] block group 0 mode 40755 links 1 uid 0 gid 0
[87.2929] rdev 0 sequence 7 flags 0x0
[87.2929] atime 1765464494.678070921
[87.2929] ctime 1765464494.686606513
[87.2929] mtime 1765464494.686606513
[87.2929] otime 1765464494.678070921
[87.2929] item 1 key (257 INODE_REF 256) itemoff 16109 itemsize 14
[87.2929] index 4 name_len 4
[87.2929] item 2 key (257 DIR_LOG_INDEX 2) itemoff 16101 itemsize 8
[87.2929] dir log end 2
[87.2929] item 3 key (257 DIR_LOG_INDEX 3) itemoff 16093 itemsize 8
[87.2929] dir log end 18446744073709551615
[87.2930] item 4 key (257 DIR_INDEX 3) itemoff 16060 itemsize 33
[87.2930] location key (258 1 0) type 1
[87.2930] transid 10 data_len 0 name_len 3
[87.2930] item 5 key (258 INODE_ITEM 0) itemoff 15900 itemsize 160
[87.2930] inode generation 9 transid 10 size 0 nbytes 0
[87.2930] block group 0 mode 100644 links 1 uid 0 gid 0
[87.2930] rdev 0 sequence 2 flags 0x0
[87.2930] atime 1765464494.678456467
[87.2930] ctime 1765464494.686606513
[87.2930] mtime 1765464494.678456467
[87.2930] otime 1765464494.678456467
[87.2930] item 6 key (258 INODE_REF 257) itemoff 15887 itemsize 13
[87.2930] index 3 name_len 3
[87.2930] BTRFS critical (device dm-0 state EAO): log replay failed in unlink_inode_for_log_replay:1045 for root 5, stage 3, with error -2: failed to unlink inode 256 parent dir 259 name subvol root 5
[87.2963] BTRFS: error (device dm-0 state EAO) in btrfs_recover_log_trees:7743: errno=-2 No such entry
[87.2981] BTRFS: error (device dm-0 state EAO) in btrfs_replay_log:2083: errno=-2 No such entry (Failed to recover log tr
So fix this by changing copy_inode_items_to_log() to always detect if
there are conflicting inodes for the ref/extref of the inode being logged
even if the inode was created in a past transaction.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
For the following write sequence with 64K page size and 4K fs block size,
it will lead to file extent items to be inserted without any data
checksum:
mkfs.btrfs -s 4k -f $dev > /dev/null
mount $dev $mnt
xfs_io -f -c "pwrite 0 16k" -c "pwrite 32k 4k" -c pwrite "60k 64K" \
-c "truncate 16k" $mnt/foobar
umount $mnt
This will result the following 2 file extent items to be inserted (extra
trace point added to insert_ordered_extent_file_extent()):
btrfs_finish_one_ordered: root=5 ino=257 file_off=61440 num_bytes=4096 csum_bytes=0
btrfs_finish_one_ordered: root=5 ino=257 file_off=0 num_bytes=16384 csum_bytes=16384
Note for file offset 60K, we're inserting a file extent without any
data checksum.
Also note that range [32K, 36K) didn't reach
insert_ordered_extent_file_extent(), which is the correct behavior as
that OE is fully truncated, should not result any file extent.
Although file extent at 60K will be later dropped by btrfs_truncate(),
if the transaction got committed after file extent inserted but before
the file extent dropping, we will have a small window where we have a
file extent beyond EOF and without any data checksum.
That will cause "btrfs check" to report error.
[CAUSE]
The sequence happens like this:
- Buffered write dirtied the page cache and updated isize
Now the inode size is 64K, with the following page cache layout:
0 16K 32K 48K 64K
|/////////////| |//| |//|
- Truncate the inode to 16K
Which will trigger writeback through:
btrfs_setsize()
|- truncate_setsize()
| Now the inode size is set to 16K
|
|- btrfs_truncate()
|- btrfs_wait_ordered_range() for [16K, u64(-1)]
|- btrfs_fdatawrite_range() for [16K, u64(-1)}
|- extent_writepage() for folio 0
|- writepage_delalloc()
| Generated OE for [0, 16K), [32K, 36K] and [60K, 64K)
|
|- extent_writepage_io()
Then inside extent_writepage_io(), the dirty fs blocks are handled
differently:
- Submit write for range [0, 16K)
As they are still inside the inode size (16K).
- Mark OE [32K, 36K) as truncated
Since we only call btrfs_lookup_first_ordered_range() once, which
returned the first OE after file offset 16K.
- Mark all OEs inside range [16K, 64K) as finished
Which will mark OE ranges [32K, 36K) and [60K, 64K) as finished.
For OE [32K, 36K) since it's already marked as truncated, and its
truncated length is 0, no file extent will be inserted.
For OE [60K, 64K) it has never been submitted thus has no data
checksum, and we insert the file extent as usual.
This is the root cause of file extent at 60K to be inserted without
any data checksum.
- Clear dirty flags for range [16K, 64K)
It is the function btrfs_folio_clear_dirty() which searches and clears
any dirty blocks inside that range.
[FIX]
The bug itself was introduced a long time ago, way before subpage and
large folio support.
At that time, fs block size must match page size, thus the range
[cur, end) is just one fs block.
But later with subpage and large folios, the same range [cur, end)
can have multiple blocks and ordered extents.
Later commit 18de34daa7c6 ("btrfs: truncate ordered extent when skipping
writeback past i_size") was fixing a bug related to subpage/large
folios, but it's still utilizing the old range [cur, end), meaning only
the first OE will be marked as truncated.
The proper fix here is to make EOF handling block-by-block, not trying
to handle the whole range to @end.
By this we always locate and truncate the OE for every dirty block.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When wait_current_trans() is called during start_transaction(), it
currently waits for a blocked transaction without considering whether
the given transaction type actually needs to wait for that particular
transaction state. The btrfs_blocked_trans_types[] array already defines
which transaction types should wait for which transaction states, but
this check was missing in wait_current_trans().
This can lead to a deadlock scenario involving two transactions and
pending ordered extents:
1. Transaction A is in TRANS_STATE_COMMIT_DOING state
2. A worker processing an ordered extent calls start_transaction()
with TRANS_JOIN
3. join_transaction() returns -EBUSY because Transaction A is in
TRANS_STATE_COMMIT_DOING
4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes
5. A new Transaction B is created (TRANS_STATE_RUNNING)
6. The ordered extent from step 2 is added to Transaction B's
pending ordered extents
7. Transaction B immediately starts commit by another task and
enters TRANS_STATE_COMMIT_START
8. The worker finally reaches wait_current_trans(), sees Transaction B
in TRANS_STATE_COMMIT_START (a blocked state), and waits
unconditionally
9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START
according to btrfs_blocked_trans_types[]
10. Transaction B is waiting for pending ordered extents to complete
11. Deadlock: Transaction B waits for ordered extent, ordered extent
waits for Transaction B
This can be illustrated by the following call stacks:
CPU0 CPU1
btrfs_finish_ordered_io()
start_transaction(TRANS_JOIN)
join_transaction()
# -EBUSY (Transaction A is
# TRANS_STATE_COMMIT_DOING)
# Transaction A completes
# Transaction B created
# ordered extent added to
# Transaction B's pending list
btrfs_commit_transaction()
# Transaction B enters
# TRANS_STATE_COMMIT_START
# waiting for pending ordered
# extents
wait_current_trans()
# waits for Transaction B
# (should not wait!)
Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered
extents:
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
btrfs_commit_transaction+0xbf7/0xda0 [btrfs]
btrfs_sync_file+0x342/0x4d0 [btrfs]
__x64_sys_fdatasync+0x4b/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Task kworker in wait_current_trans waiting for transaction commit:
Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs]
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
wait_current_trans+0xb0/0x110 [btrfs]
start_transaction+0x346/0x5b0 [btrfs]
btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs]
btrfs_work_helper+0xe8/0x350 [btrfs]
process_one_work+0x1d3/0x3c0
worker_thread+0x4d/0x3e0
kthread+0x12d/0x150
ret_from_fork+0x1f/0x30
Fix this by passing the transaction type to wait_current_trans() and
checking btrfs_blocked_trans_types[cur_trans->state] against the given
type before deciding to wait. This ensures that transaction types which
are allowed to join during certain blocked states will not unnecessarily
wait and cause deadlocks.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here.
Fixes: 1abe9b8a138c ("Btrfs: add initial tracepoint support for btrfs")
Reported-by: syzbot+d991fea1b4b23b1f6bf8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d991fea1b4b23b1f6bf8
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a bug that if a subvolume has multi-level parent qgroups, and
is able to do a quick inherit, only the direct parent qgroup got
updated:
mkfs.btrfs -f -O quota $dev
mount $dev $mnt
btrfs subv create $mnt/subv1
btrfs qgroup create 1/100 $mnt
btrfs qgroup create 2/100 $mnt
btrfs qgroup assign 1/100 2/100 $mnt
btrfs qgroup assign 0/256 1/100 $mnt
btrfs qgroup show -p --sync $mnt
Qgroupid Referenced Exclusive Parent Path
-------- ---------- --------- ------ ----
0/5 16.00KiB 16.00KiB - <toplevel>
0/256 16.00KiB 16.00KiB 1/100 subv1
1/100 16.00KiB 16.00KiB 2/100 2/100<1 member qgroup>
2/100 16.00KiB 16.00KiB - <0 member qgroups>
btrfs subv snap -i 1/100 $mnt/subv1 $mnt/snap1
btrfs qgroup show -p --sync $mnt
Qgroupid Referenced Exclusive Parent Path
-------- ---------- --------- ------ ----
0/5 16.00KiB 16.00KiB - <toplevel>
0/256 16.00KiB 16.00KiB 1/100 subv1
0/257 16.00KiB 16.00KiB 1/100 snap1
1/100 32.00KiB 32.00KiB 2/100 2/100<1 member qgroup>
2/100 16.00KiB 16.00KiB - <0 member qgroups>
# Note that 2/100 is not updated, and qgroup numbers are inconsistent
umount $mnt
[CAUSE]
If the snapshot source subvolume belongs to a parent qgroup, and the new
snapshot target is also added to the new same parent qgroup, we allow a
quick update without marking qgroup inconsistent.
But that quick update only update the parent qgroup, without checking if
there is any more parent qgroups.
[FIX]
Iterate through all parent qgroups during the quick inherit.
Reported-by: Boris Burkov <boris@bur.io>
Fixes: b20fe56cd285 ("btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The resource name may include an address suffix, for example:
rsc-table@1fff8000.
To handle such cases, use strstarts() instead of strcmp() when checking
for "rsc-table".
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Fixes: 67a7bc7f0358 ("remoteproc: Use of_reserved_mem_region_* functions for "memory-region"")
Link: https://lore.kernel.org/r/20251208233302.684139-1-shenwei.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
qgroup_snapshot_quick_inherit() detects conditions where the snapshot
destination would land in the same parent qgroup as the snapshot source
subvolume. In this case we can avoid costly qgroup calculations and just
add the nodesize of the new snapshot to the parent.
However, in the case of squotas this is actually a double count, and
also an undercount for deeper qgroup nestings.
The following annotated script shows the issue:
btrfs quota enable --simple "$mnt"
# Create 2-level qgroup hierarchy
btrfs qgroup create 2/100 "$mnt" # Q2 (level 2)
btrfs qgroup create 1/100 "$mnt" # Q1 (level 1)
btrfs qgroup assign 1/100 2/100 "$mnt"
# Create base subvolume
btrfs subvolume create "$mnt/base" >/dev/null
base_id=$(btrfs subvolume show "$mnt/base" | grep 'Subvolume ID:' | awk '{print $3}')
# Create intermediate snapshot and add to Q1
btrfs subvolume snapshot "$mnt/base" "$mnt/intermediate" >/dev/null
inter_id=$(btrfs subvolume show "$mnt/intermediate" | grep 'Subvolume ID:' | awk '{print $3}')
btrfs qgroup assign "0/$inter_id" 1/100 "$mnt"
# Create working snapshot with --inherit (auto-adds to Q1)
# src=intermediate (in only Q1)
# dst=snap (inheriting only into Q1)
# This double counts the 16k nodesize of the snapshot in Q1, and
# undercounts it in Q2.
btrfs subvolume snapshot -i 1/100 "$mnt/intermediate" "$mnt/snap" >/dev/null
snap_id=$(btrfs subvolume show "$mnt/snap" | grep 'Subvolume ID:' | awk '{print $3}')
# Fully complete snapshot creation
sync
# Delete working snapshot
# Q1 and Q2 will lose the full snap usage
btrfs subvolume delete "$mnt/snap" >/dev/null
# Delete intermediate and remove from Q1
# Q1 and Q2 will lose the full intermediate usage
btrfs qgroup remove "0/$inter_id" 1/100 "$mnt"
btrfs subvolume delete "$mnt/intermediate" >/dev/null
# Q1 should be at 0, but still has 16k. Q2 is "correct" at 0 (for now...)
# Trigger cleaner, wait for deletions
mount -o remount,sync=1 "$mnt"
btrfs subvolume sync "$mnt" "$snap_id"
btrfs subvolume sync "$mnt" "$inter_id"
# Remove Q1 from Q2
# Frees 16k more from Q2, underflowing it to 16EiB
btrfs qgroup remove 1/100 2/100 "$mnt"
# And show the bad state:
btrfs qgroup show -pc "$mnt"
Qgroupid Referenced Exclusive Parent Child Path
-------- ---------- --------- ------ ----- ----
0/5 16.00KiB 16.00KiB - - <toplevel>
0/256 16.00KiB 16.00KiB - - base
1/100 16.00KiB 16.00KiB - - <0 member qgroups>
2/100 16.00EiB 16.00EiB - - <0 member qgroups>
Fix this by simply not doing this quick inheritance with squotas.
I suspect that it is also wrong in normal qgroups to not recurse up the
qgroup tree in the quick inherit case, though other consistency checks
will likely fix it anyway.
Fixes: b20fe56cd285 ("btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
support for NVL-S and the support using functional topology fragments for
Soundwire configurations is introduced in 6.19-rc1 in parallel.
The SOF projects plan is to not create individual topology files for NVL
as with SDCA and the functional topology support can handle most if not
all soundwire devices going forward.
However one issue have been identified with the functional topology only
support, which was masked by the presence of a single topology file:
if the device contains a dai link for which we don't have topology fragment,
then the probe will fail.
This worked with a fallback to a monolithic topology file - which made the
dai link to be ignored.
The first patch in the series adds a flag to instruct the function discovery
to make a best effort to form a card by ignoring functions without
corresponding fragment (and print this out for developers) in case there
is no fallback topology available.
The second patch removes the match entry to refer to a topology file which
will not be built by the SOF project.
|
|
Now that "system" devices are represented as platform devices, they
are not claimed by the PNP ACPI scan handler any more and platform
devices can be created for ACPI device objects listing "system"
device IDs as their compatible device IDs.
Accordingly, it should not be necessary any more to add device IDs
to acpi_nonpnp_device_ids[], so drop it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/3587570.QJadu78ljV@rafael.j.wysocki
|
|
Now that "system" devices are represented as platform devices, they
are not claimed by the PNP ACPI scan handler any more and the Intel
virtual button array platform devices should be created by the ACPI
core, so the driver does not need to attempt to create a platform
device by itself.
Accordingly, make it stop doing so.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/8661724.NyiUUSuA9g@rafael.j.wysocki
|
|
Now that "system" devices are represented as platform devices, they
are not claimed by the PNP ACPI scan handler any more and the Intel
HID platform devices should be created by the ACPI core, so the
driver does not need to attempt to create a platform device by
itself.
Accordingly, make it stop doing so.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/6115868.MhkbZ0Pkbq@rafael.j.wysocki
|
|
There is a long-standing problem with ACPI device enumeration that
if the given device has a compatible ID which is one of the generic
system resource device IDs (PNP0C01 and PNP0C02), it will be claimed
by the PNP scan handler and it will not be represented as a platform
device, so it cannot be handled by a platform driver.
Drivers have been working around this issue by "manually" creating
platform devices that they can bind to (see the Intel HID driver for
one example) or adding their device IDs to acpi_nonpnp_device_ids[].
None of the above is particularly clean though and the only reason why
the PNP0C01 and PNP0C02 device IDs are present in acpi_pnp_device_ids[]
is to allow the legacy PNP system driver to bind to those devices and
reserve their resources so they are not used going forward.
Obviously, to address this problem PNP0C01 and PNP0C02 need to be
dropped from acpi_pnp_device_ids[], but doing so without making any
other changes would be problematic because the ACPI core would then
create platform devices for the generic system resource device objects
and that would not work on all systems for two reasons. First, the
PNP system driver explicitly avoids reserving I/O resources below the
"standard PC hardware" boundary, 0x100, to avoid conflicts in that range
(one possible case when this may happen is when the CMOS RTC driver is
involved), but the platform device creation code does not do that.
Second, there may be resource conflicts between the "system" devices and
the other devices in the system, possibly including conflicts with PCI
BARs. Registering the PNP system driver via fs_initcall() helps to
manage those conflicts, even though it does not make them go away.
Resource conflicts during the registration of "motherboard resources"
that occur after PCI has claimed BARs are harmless as a rule and do
not need to be addressed in any specific way.
To overcome the issues mentioned above, use the observation that it
is not actually necessary to create any device objects in addition
to struct acpi_device ones in order to reserve the "system" device
resources because that can be done directly in the ACPI device
enumeration code.
Namely, modify acpi_default_enumeration() to add the given ACPI device
object to a special "system devices" list if its _HID is either PNP0C01
or PNP0C02 without creating a platform device for it. Next, add a new
special acpi_scan_claim_resources() function that will be run via
fs_initcall() and will walk that list and reserve resources for each
device in it along the lines of what the PNP system driver does.
Having made the above changes, drop PNP0C01 and PNP0C02 from
acpi_pnp_device_ids[] which will allow platform devices to be created
for ACPI device objects whose _CID lists contain PNP0C01 or PNP0C02,
but the _HID is not in acpi_pnp_device_ids[].
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Drop a leftover comment and add a new one elsewhere ]
Link: https://patch.msgid.link/9550709.CDJkKcVGEf@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pass character "0" rather than NULL terminator to properly format
queue restoration SMI events. Currently, the NULL terminator precedes
the newline character that is intended to delineate separate events
in the SMI event buffer, which can break userspace parsers.
Signed-off-by: Brian Kocoloski <brian.kocoloski@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6e7143e5e6e21f9d5572e0390f7089e6d53edf3c)
|
|
User-configured SCLK(GPU core clock)frequencies were not persisting
across S0ix suspend/resume cycles on smu v14 hardware.
The issue occurred because of the code resetting clock frequency
to zero during resume.
This patch addresses the problem by:
- Preserving user-configured values in driver and sets the
clock frequency across resume
- Preserved settings are sent to the hardware during resume
Signed-off-by: mythilam <mythilam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 20ba98326f4c69e6bf8d1f42942ece485a675b27)
|
|
Avoid a possible UAF in GPU recovery due to a race between
the sched timeout callback and the tdr work queue.
The gpu recovery function calls drm_sched_stop() and
later drm_sched_start(). drm_sched_start() restarts
the tdr queue which will eventually free the job. If
the tdr queue frees the job before time out callback
completes, the job will be freed and we'll get a UAF
when accessing the pasid. Cache it early to avoid the
UAF.
Example KASAN trace:
[ 493.058141] BUG: KASAN: slab-use-after-free in amdgpu_device_gpu_recover+0x968/0x990 [amdgpu]
[ 493.067530] Read of size 4 at addr ffff88b0ce3f794c by task kworker/u128:1/323
[ 493.074892]
[ 493.076485] CPU: 9 UID: 0 PID: 323 Comm: kworker/u128:1 Tainted: G E 6.16.0-1289896.2.zuul.bf4f11df81c1410bbe901c4373305a31 #1 PREEMPT(voluntary)
[ 493.076493] Tainted: [E]=UNSIGNED_MODULE
[ 493.076495] Hardware name: TYAN B8021G88V2HR-2T/S8021GM2NR-2T, BIOS V1.03.B10 04/01/2019
[ 493.076500] Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched]
[ 493.076512] Call Trace:
[ 493.076515] <TASK>
[ 493.076518] dump_stack_lvl+0x64/0x80
[ 493.076529] print_report+0xce/0x630
[ 493.076536] ? _raw_spin_lock_irqsave+0x86/0xd0
[ 493.076541] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 493.076545] ? amdgpu_device_gpu_recover+0x968/0x990 [amdgpu]
[ 493.077253] kasan_report+0xb8/0xf0
[ 493.077258] ? amdgpu_device_gpu_recover+0x968/0x990 [amdgpu]
[ 493.077965] amdgpu_device_gpu_recover+0x968/0x990 [amdgpu]
[ 493.078672] ? __pfx_amdgpu_device_gpu_recover+0x10/0x10 [amdgpu]
[ 493.079378] ? amdgpu_coredump+0x1fd/0x4c0 [amdgpu]
[ 493.080111] amdgpu_job_timedout+0x642/0x1400 [amdgpu]
[ 493.080903] ? pick_task_fair+0x24e/0x330
[ 493.080910] ? __pfx_amdgpu_job_timedout+0x10/0x10 [amdgpu]
[ 493.081702] ? _raw_spin_lock+0x75/0xc0
[ 493.081708] ? __pfx__raw_spin_lock+0x10/0x10
[ 493.081712] drm_sched_job_timedout+0x1b0/0x4b0 [gpu_sched]
[ 493.081721] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 493.081725] process_one_work+0x679/0xff0
[ 493.081732] worker_thread+0x6ce/0xfd0
[ 493.081736] ? __pfx_worker_thread+0x10/0x10
[ 493.081739] kthread+0x376/0x730
[ 493.081744] ? __pfx_kthread+0x10/0x10
[ 493.081748] ? __pfx__raw_spin_lock_irq+0x10/0x10
[ 493.081751] ? __pfx_kthread+0x10/0x10
[ 493.081755] ret_from_fork+0x247/0x330
[ 493.081761] ? __pfx_kthread+0x10/0x10
[ 493.081764] ret_from_fork_asm+0x1a/0x30
[ 493.081771] </TASK>
Fixes: a72002cb181f ("drm/amdgpu: Make use of drm_wedge_task_info")
Link: https://github.com/HansKristian-Work/vkd3d-proton/pull/2670
Cc: SRINIVASAN.SHANMUGAM@amd.com
Cc: vitaly.prosyak@amd.com
Cc: christian.koenig@amd.com
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 20880a3fd5dd7bca1a079534cf6596bda92e107d)
|
|
Smatch reported:
kernel/sched/ext.c:5332 scx_alloc_and_add_sched() warn: passing zero to 'ERR_PTR'
In scx_alloc_and_add_sched(), the alloc_percpu() failure path jumps to
err_free_gdsqs without initializing @ret. That can lead to returning
ERR_PTR(0), which violates the ERR_PTR() convention and confuses
callers.
Set @ret to -ENOMEM before jumping to the error path when
alloc_percpu() fails.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202512141601.yAXDAeA9-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Fixes: c201ea1578d3 ("sched_ext: Move event_stats_cpu into scx_sched")
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
[why]
need to enable APG_CLOCK_ENABLE enable first
also need to wake up az from D3 before access az block
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf5e396957acafd46003318965500914d5f4edfa)
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
On system suspend / resume we always power up the DSP and boot the
firmware, which is not strictly needed as right after the firmware booted
up we power the DSP down again on suspend and we also power it down after
resume after some inactivity.
Similarly, on jack insert/removal we needlesly boot up the firmware to check
the jack status, which needs no DSP/firmware communication.
The on-demand DSP boot will make sure that we boot the DSP firmware up only
when it is needed - for audio activity, in other cases the firmware will be
not booted up, which saves time.
Out of caution, add a new platform descriptor flag to enable on-demand
DSP boot since this might not work without changes to platform code on
certain platforms.
With the on-demand dsp boot enabled we will not boot the DSP and firmware
up on system or rpm resume, just enable audio subsystem since audio IPs,
like HDA and SoundWire might be needed (codecs suspend/resume operation).
Only boot up the DSP during the first hw_params() call when the DSP is
really going to be needed.
In this way we can handle the audio related use cases:
normal audio use (rpm suspend/resume)
system suspend/resume without active audio
system suspend/resume with active audio
system suspend/resume without active audio, and audio start before the rpm
suspend timeout
Add module option to force the on-demand DSP boot to allow it to be
disabled or enabled without kernel change for testing.
The on-demand boot has been tested in our CI for more than half a year
and so far no issues have been seen on supported platforms since it's
introduction to our development tree (sof-dev).
|
|
[Why]
Different platforms use different NBIO header files,
causing display code to use differnt offset and read
wrong accelerated status.
[How]
- Unified NBIO offset header file across platform.
- Correct scratch registers offsets to proper locations.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4667
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 576e032e909c8a6bb3d907b4ef5f6abe0f644199)
Cc: stable@vger.kernel.org
|
|
[Why]
Different platforms use differnet NBIO header files,
causing display code to use differnt offset and read
wrong accelerated status.
[How]
- Unified NBIO offset header file across platform.
- Correct scratch registers offsets to proper locations.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4667
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 49a63bc8eda0304ba307f5ba68305f936174f72d)
Cc: stable@vger.kernel.org
|
|
If console suspend has been disabled using `no_console_suspend` also
wake up during thaw() so that some messages can be seen for debugging.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4191
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 63387cbbb714d9f0d179d9d4560de1408d0906de)
|
|
Emil Tsalapatis says:
====================
libbpf: move arena variables out of the zero page
Modify libbpf to place arena globals at the end of the arena mapping
instead of the very beginning. This allows programs to leave the
"zero page" of the arena unmapped, so that NULL arena pointer
dereferences trigger a page fault and associated backtrace in BPF streams.
In contrast, the current policy of placing global data in the zero pages
means that NULL dereferences silently corrupt global data, e.g, arena
qspinlock state. This makes arena bugs more difficult to debug.
The patchset adds code to libbpf to move global arena data to the end of
the arena. At load time, libbpf adjusts each symbol's location within
the arena to point to the right location in the arena. The patchset
also adjusts the arena skeleton pointer to point to the arena globals,
now that they are not in the beginning of the arena region.
CHANGESET
=========
v3->v4: (https://lore.kernel.org/bpf/20251215161313.10120-1-emil@etsalapatis.com/T/#t)
- Added Acks by Eduard
- Changed jumptable sym_off to unsigned int for consistency (AI)
- Adjusted selftests to ensure arena globals are actually mapped in (Eduard)
- (Patch 2) Adjusted selftests that were failing because they were expecting the
now removed "direct map offset" error message
v2->v3: (https://lore.kernel.org/bpf/20251203162625.13152-1-emil@etsalapatis.com/)
- Remove unnecessary kernel bounds check in resolve_pseudo_ldimm64
(Andrii)
- Added patch to turn sym_off unsigned to prevent overflow (AI)
- Remove obsolete references to offsets from test patch description
(Andrii)
- Use size_t for arena_data_off (Andrii)
- Remove extra mutable variable from offset calculations (Andrii)
v1->v2: (https://lore.kernel.org/bpf/20251118030058.162967-1-emil@etsalapatis.com)
- Moved globals to the end of the mapping: (Andrii)
- Removed extra parameter for offset and parameter picking logic
- Removed padding in the skeleton
- Removed additional libbpf call
- Added Reviewed-by from Eduard on patch 1
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
====================
Link: https://patch.msgid.link/20251216173325.98465-1-emil@etsalapatis.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add tests for the new libbpf globals arena offset logic. The
tests cover the case of globals being as large as the arena
itself, and being smaller than the arena. In that case, the
data is placed at the end of the arena, and the beginning
of the arena is free.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251216173325.98465-6-emil@etsalapatis.com
|
|
Arena globals are currently placed at the beginning of the arena
by libbpf. This is convenient, but prevents users from reserving
guard pages in the beginning of the arena to identify NULL pointer
dereferences. Adjust the load logic to place the globals at the
end of the arena instead.
Also modify bpftool to set the arena pointer in the program's BPF
skeleton to point to the globals. Users now call bpf_map__initial_value()
to find the beginning of the arena mapping and use the arena pointer
in the skeleton to determine which part of the mapping holds the
arena globals and which part is free.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20251216173325.98465-5-emil@etsalapatis.com
|
|
The symbols' relocation offsets in BPF are stored in an int field,
but cannot actually be negative. When in the next patch libbpf relocates
globals to the end of the arena, it is also possible to have valid
offsets > 2GiB that are used to calculate the final relo offsets.
Avoid accidentally interpreting large offsets as negative by turning
the sym_off field unsigned.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20251216173325.98465-4-emil@etsalapatis.com
|
|
The verifier currently limits direct offsets into a map to 512MiB
to avoid overflow during pointer arithmetic. However, this prevents
arena maps from using direct addressing instructions to access data
at the end of > 512MiB arena maps. This is necessary when moving
arena globals to the end of the arena instead of the front.
Refactor the verifier code to remove the offset calculation during
direct value access calculations. This is possible because the only
two map types that implement .map_direct_value_addr() are arrays and
arenas, and they both do their own internal checks to ensure the
offset is within bounds.
Adjust selftests that expect the old error. These tests still fail
because the verifier identifies the access as out of bounds for the
map, so change them to expect an "invalid access to map value pointer"
error instead.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251216173325.98465-3-emil@etsalapatis.com
|
|
The big_alloc1 test in verifier_arena_large assumes that the arena base
and the first page allocated by bpf_arena_alloc_pages are identical.
This is not the case, because the first page in the arena is populated
by global arena data. The test still passes because the code makes the
tacit assumption that the first page is on offset PAGE_SIZE instead of
0.
Make this distinction explicit in the code, and adjust the page offsets
requested during the test to count from the beginning of the arena
instead of using the address of the first allocated page.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20251216173325.98465-2-emil@etsalapatis.com
|
|
Replace DRM_DEBUG(), DRM_ERROR(), and DRM_INFO() calls with the
corresponding drm_dbg(), drm_err(), and drm_info() helpers in the
radeon driver.
The drm_*() logging helpers take a struct drm_device * argument,
allowing the DRM core to prefix log messages with the correct device
name and instance. This is required to correctly distinguish log
messages on systems with multiple GPUs.
This change aligns radeon with the DRM TODO item:
"Convert logging to drm_* functions with drm_device parameter".
Signed-off-by: Abhishek Rajput <abhiraj21put@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To acommandate specific interrupt source for gfx v12_1
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Override the local MTYPE mappings in KFD SVM code with mtype_local
modprobe param for GFX 12.1.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the number instances of firmware is RLC_NUM_INS_CODE0(Only 1 inst),
need to copy it directly for rlcautolad.
For the firmware which instances number bigger than 1, only copy for
enabled XCC to save copy time.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gfx sysfs support for gfx_v12_1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix to use local register offset inside die for mes fw accessing
local/remote xcd register.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Normalize registers address to local xcc address for gfx v12_1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support xcc harvest for ih translate to logic xcc.
V2: Only check available instances
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct inst_id input from physical to logic for sdma v7_1.
V2: Show real instance number on logic xcc.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use physical xcc_id to get rrmt on misc_op for mes v12_1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace DRM_ERROR() and DRM_INFO() calls in
drivers/gpu/drm/radeon/radeon_display.c with the corresponding
drm_err() and drm_info() helpers.
The drm_*() logging functions take a struct drm_device * argument,
allowing the DRM core to prefix log messages with the correct device
name and instance. This is required to correctly distinguish log
messages on systems with multiple GPUs.
This change aligns radeon with the DRM TODO item:
"Convert logging to drm_* functions with drm_device parameter".
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukesh Ogare <mukeshogare871@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pass character "0" rather than NULL terminator to properly format
queue restoration SMI events. Currently, the NULL terminator precedes
the newline character that is intended to delineate separate events
in the SMI event buffer, which can break userspace parsers.
Signed-off-by: Brian Kocoloski <brian.kocoloski@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct xcc_id input to GET_INST from physical to logic for
gfx_v12_1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Need to allocate memory for MEC FW data and program
registers CP_MEC_MDBASE for each XCC respectively.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The gmc fault virtual address is up to 57bit for 5 level page table,
this also works with 48bit virtual address for 4 level page table.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set pde3 invalidation request bit during tlb flush for up to 5 level
page table.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For 5-level page tables, update compute vmid sh_mem_base LDS aperture
and Scratch aperture base address to above 57-bit, use the same setting
from gfx vmid, we can remove the duplicate macro.
Update queue pdd lds_base and scratch_base to the same value as
sh_mem_base setting. Then application get process apertures return the
correct value to access LDS and Scratch memory for 57bit address 5-level
page tables. This may pass to MES in future when mapping queue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GFX 12.1.0 support 57bit virtual, 52bit physical address, set PDE
max_level to 4, min_vm_size to 128PB to enable GPU vm 5-level page
tables to support 57bit virtual address.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add GFX12.1 MEC P2/P3 STACK firmware init.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
