| Age | Commit message (Collapse) | Author |
|---|
|
The Z125 define is not used anywhere, thus removed. Also used a
more specific name for the maximum number of ports per unit and
removed the duplicated define MAX_PORTS
Reviewed-by: Jose Javier Rodriguez Barbarin <dev-josejavier.rodriguez@duagon.com>
Signed-off-by: Filip Jensen <dev-Felipe.Jensen@duagon.com>
Link: https://patch.msgid.link/20251210164804.94801-2-dev-Felipe.Jensen@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
After commit bfb24564b5fd ("tty: vt/keyboard: use __free()"), builds
using asm goto for put_user() and get_user() with a version of clang
older than 17 error with:
drivers/tty/vt/keyboard.c:1709:7: error: cannot jump from this asm goto statement to one of its possible targets
if (put_user(asize, &a->kb_cnt))
^
...
arch/arm64/include/asm/uaccess.h:298:2: note: expanded from macro '__put_mem_asm'
asm goto( \
^
drivers/tty/vt/keyboard.c:1687:7: note: possible target of asm goto statement
if (put_user(asize, &a->kb_cnt))
^
...
arch/arm64/include/asm/uaccess.h:342:2: note: expanded from macro '__raw_put_user'
__rpu_failed: \
^
drivers/tty/vt/keyboard.c:1697:23: note: jump exits scope of variable with __attribute__((cleanup))
void __free(kfree) *buf = kmalloc_array(MAX_DIACR, sizeof(struct kbdiacruc),
^
drivers/tty/vt/keyboard.c:1671:33: note: jump bypasses initialization of variable with __attribute__((cleanup))
struct kbdiacr __free(kfree) *dia = kmalloc_array(MAX_DIACR, sizeof(struct kbdiacr),
^
Prior to a fix to clang's scope checker in clang 17 [1], all labels in a
function were validated as potential targets of all asm gotos in a
function, regardless of whether they actually were a target of an asm
goto call, resulting in false positive errors about skipping over
variables marked with the cleanup attribute.
To workaround this error, split up the bodies of the case statements in
vt_do_diacrit() into their own functions so that the scope checker does
not trip up on the multiple instances of __free().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509091702.Oc7eCRDw-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202511241835.EA8lShgH-lkp@intel.com/
Link: https://github.com/llvm/llvm-project/commit/f023f5cdb2e6c19026f04a15b5a935c041835d14 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251125-tty-vt-keyboard-wa-clang-scope-check-error-v1-1-f5a5ea55c578@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move pm_runtime_set_active() call earlier in probe to simplify error
handling and add proper error checking to ensure the device is marked
as active before any runtime PM operations can occur.
Additionally, replace the const struct dev_pm_ops declaration with
_DEFINE_DEV_PM_OPS macro for better consistency with modern kernel PM
patterns.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251104145433.2316165-3-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add error checking for clk_prepare_enable() calls in
dw8250_runtime_resume(). Currently if either clock fails to enable,
the function returns success while leaving clocks in inconsistent state.
This change implements comprehensive error handling by checking the return
values of both clk_prepare_enable() calls. If the second clock enable
operation fails after the first clock has already been successfully
enabled, the code now properly cleans up by disabling and unpreparing
the first clock before returning. The error code is then propagated to
the caller, ensuring that clock enable failures are properly reported
rather than being silently ignored.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251104145433.2316165-2-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Actually test the documented expectation of dma_fence_wait() instead of
comming up with a mock_wait implementation which uses undocumented
and non standard return codes and behavior.
Additional to that increase the timeout to one second, otherwise the
test case is a bit unreliable.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/346e3df8-5f3a-4394-9d90-4ba107294161@ursulin.net
|
|
When clk_bulk_prepare_enable() fails, the error path jumps to
err_resetc_assert, skipping clk_bulk_put_all() and leaking the
clock references acquired by clk_bulk_get_all().
Add err_clk_put_all label to properly release clock resources
in all error paths.
Found via static analysis and code review.
Fixes: c0c61471ef86 ("usb: dwc3: of-simple: Convert to bulk clk API")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251211064937.2360510-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing null check for cci parameter before dereferencing it in
ucsi_sync_control_common(). The function can be called with cci=NULL
from ucsi_acknowledge(), which leads to a null pointer dereference
when accessing *cci in the condition check.
The crash occurs because the code checks if cci is not null before
calling ucsi->ops->read_cci(ucsi, cci), but then immediately
dereferences cci without a null check in the following condition:
(*cci & UCSI_CCI_COMMAND_COMPLETE).
KASAN trace:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:ucsi_sync_control_common+0x2ae/0x4e0 [typec_ucsi]
Cc: stable <stable@kernel.org>
Fixes: 667ecac55861 ("usb: typec: ucsi: return CCI and message from sync_control callback")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251216122210.5457-1-superm1@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lpc32xx_udc_probe() acquires an i2c_client reference through
isp1301_get_client() but fails to release it in both error handling
paths and the normal removal path. This could result in a reference
count leak for the I2C device, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the probe failure path and in the remove function.
Calling path: isp1301_get_client() -> of_find_i2c_device_by_node() ->
i2c_find_device_by_fwnode(). As comments of i2c_find_device_by_fwnode()
says, 'The user must call put_device(&client->dev) once done with the
i2c client.'
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 24a28e428351 ("USB: gadget driver for LPC32xx")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251215020931.15324-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dp_altmode_probe()
In error paths, call typec_altmode_put_plug() to drop the device reference
obtained by typec_altmode_get_plug().
Fixes: 71ba4fe56656 ("usb: typec: altmodes/displayport: add SOP' support")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251206070445.190770-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The delayed work item otg_event is initialized in fsl_otg_conf() and
scheduled under two conditions:
1. When a host controller binds to the OTG controller.
2. When the USB ID pin state changes (cable insertion/removal).
A race condition occurs when the device is removed via fsl_otg_remove():
the fsl_otg instance may be freed while the delayed work is still pending
or executing. This leads to use-after-free when the work function
fsl_otg_event() accesses the already freed memory.
The problematic scenario:
(detach thread) | (delayed work)
fsl_otg_remove() |
kfree(fsl_otg_dev) //FREE| fsl_otg_event()
| og = container_of(...) //USE
| og-> //USE
Fix this by calling disable_delayed_work_sync() in fsl_otg_remove()
before deallocating the fsl_otg structure. This ensures the delayed work
is properly canceled and completes execution prior to memory deallocation.
This bug was identified through static analysis.
Fixes: 0807c500a1a6 ("USB: add Freescale USB OTG Transceiver driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20251205034831.12846-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
usbhsp_get_pipe() set pipe's flags to IS_USED. In error paths,
usbhsp_put_pipe() is required to clear pipe's flags to prevent
pipe exhaustion.
Fixes: f1407d5c6624 ("usb: renesas_usbhs: Add Renesas USBHS common code")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20251204132129.109234-1-haoxiang_li2024@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Selecting DRM_AUX_HPD_BRIDGE is not possible from a built-in driver when
CONFIG_DRM=m:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [m]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && OF [=y]
Selected by [y]:
- UCSI_HUAWEI_GAOKUN [=y] && USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_UCSI [=y] && EC_HUAWEI_GAOKUN [=y] && DRM_BRIDGE [=y] && OF [=y]
Add the same dependency we have in similar drivers to work around this.
Fixes: 00327d7f2c8c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251204101111.1035975-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some platforms, switching USB roles from host to device can trigger
controller faults due to premature PHY power-down. This occurs when the
PHY is disabled too early during teardown, causing synchronization
issues between the PHY and controller.
Keep susphy enabled during dwc3_host_exit() and dwc3_gadget_exit()
ensures the PHY remains in a low-power state capable of handling
required commands during role switch.
Cc: stable <stable@kernel.org>
Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init")
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Udipto Goswami <udipto.goswami@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20251126054221.120638-1-udipto.goswami@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixup replaces tty_vhangup() call with call to
tty_port_tty_vhangup(). Both calls hangup tty device
synchronously however tty_port_tty_vhangup() increases
reference count during the hangup operation using
scoped_guard(tty_port_tty).
Cc: stable <stable@kernel.org>
Fixes: 1f73b8b56cf3 ("xhci: dbgtty: fix device unregister")
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://patch.msgid.link/20251127111644.3161386-1-ukaszb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The libopenssl is required by bpftool which is needed to generate BPF
skeleton. Disable it by setting BUILD_BPF_SKEL to 0 otherwise it'll see
build errors like below:
CC /build/util/bpf_skel/.tmp/bootstrap/sign.o
sign.c:16:10: fatal error: openssl/opensslv.h: No such file or directory
16 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[3]: *** [Makefile:256: /build/util/bpf_skel/.tmp/bootstrap/sign.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [Makefile.perf:1211: /build/util/bpf_skel/.tmp/bootstrap/bpftool] Error 2
make[1]: *** [Makefile.perf:287: sub-make] Error 2
make: *** [Makefile:76: all] Error 2
Now it'll skip the build with the following message:
Makefile.config:729: Warning: Disabled BPF skeletons as libopenssl is required
Closes: https://lore.kernel.org/r/aP7uq6eVieG8v_v4@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
It's used by bpftool and the kernel build. Let's add a feature test so
that perf can decide what to do based on the availability.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
In the current kernel USB device driver code, only the name field is
required to be provided; all other fields are optional.
Correct this part of the description.
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20251202090948.334809-1-cong.yi@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ucsi_psy_get_voltage_max and ucsi_psy_get_current_max are calculated
using whichever pdo is in the last position of the src_pdos array, presuming
it to be a fixed pdo, so the pdo_fixed_voltage or pdo_max_current
helpers are used on that last pdo.
However, non-Fixed PDOs such as Battery PDOs, Augmented PDOs (used for AVS and
for PPS) may exist, and are always at the end of the array if they do.
In the event one of these more advanced chargers are attached the helpers for
fixed return mangled values.
Here's an example case of a Google Pixel Flex Dual Port 67W USB-C Fast Charger
with PPS support:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=13400000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=5790000
POWER_SUPPLY_CURRENT_NOW=3250000
Voltage Max is reading as 13.4V, but that's an incorrect decode of the PPS
APDO in the last position. Same goes for CURRENT_MAX. 5.79A is incorrect.
Instead, enumerate through the src_pdos and filter just for Fixed PDOs for
now, and find the one with the highest voltage and current respectively.
After, from the same charger:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=20000000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=4000000
POWER_SUPPLY_CURRENT_NOW=3250000
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-3-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
current_now would always return 0 in for non-PD power sources, and the
negotiated current based on the Request RDO in PD mode.
For USB Type-C current or legacy Default USB cases current_now will present
the max value of those modes, as that is the equivalent of the Request RDO
in PD.
Also, current_now will now return 0 when the port is disconnected to match
the same behavior of current_max.
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-2-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
EHCI and OHCI controllers can be DMA coherent on some platforms, so
allow the "dma-coherent" property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215212515.3318052-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
configfs
When using f_midi from configfs the USB MIDI interface string is hardcoded
to 'MIDI function'.
This USB string descriptor is used by some third-party OS or software to
display the name of the MIDI device
Since we add an additional string option a new macro block was created to
factorize declarations
Signed-off-by: Victor Krawiec <victor.krawiec@arturia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251209164006.143219-1-victor.krawiec@arturia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DRM may want to register a notifier on the typec bus to know when
a typec altmode device is added, and distinguish between different
types of typec altmode device.
Export these things.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208015500.94-3-kernel@airkyi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The port and plug altmodes can't be bound to the altmode
drivers because the altmode drivers are meant for partner
communication using the VDM (vendor defined messages), but
they can still be part of the bus. The bus will make sure
that the normal bus notifications are available also with
the port altmodes.
The previously used common device type for all alternate
modes is replaced with separate dedicated device types for
port, plug, and partner alternate modes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Link: https://patch.msgid.link/20251208015500.94-2-kernel@airkyi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the AST2700 SOC in the vhub gadget driver. AST2700
uses a 64-bit DMA addressing capability, so select 64-bit DMA mask
for compatible. AST2700 vhub also requires an reset line, so hook
up the optional reset control and assert/deassert it during probe
and remove.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://patch.msgid.link/20251128-upstream_vhub-v2-2-1fa66a5833c2@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the "aspeed,ast2700-usb-vhub" compatible. The ast2700 vhub
controller requires an reset, so make the "resets" property
mandatory for this compatible to reflect the hardware requirement.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251128-upstream_vhub-v2-1-1fa66a5833c2@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the MCU halt and wait for halt procedures during
panthor_fw_unplug() as the MCU can be in a variety of states or the FW
may not even be loaded/initialized at all, the latter of which can lead
to a NULL pointer dereference.
It should be safe on unplug to just disable the MCU without waiting for
it to halt as it may not be able to.
Fixes: 514072549865 ("drm/panthor: Support GLB_REQ.STATE field for Mali-G1 GPUs")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu@dudau.co.uk>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251215203312.1084182-1-karunika.choo@arm.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
MMC_SDHCI_ESDHC_IMX requires ARCH_MXC despite also being used on
ARCH_S32, which results in unmet dependencies when compiling strictly
for ARCH_S32. Resolve this by adding ARCH_S32 as an alternative to
ARCH_MXC in the driver's dependencies.
Fixes: 5c4f00627c9a ("mmc: sdhci-esdhc-imx: add NXP S32G2 support")
Cc: stable@bvger.kernel.org
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On Xilinx/AMD platforms, the CD stable bit take slightly longer than
one second(about an additional 100ms) to assert after a host
controller reset. Although no functional failure observed with the
existing one second delay but to ensure reliable initialization, increase
the CD stable timeout to 2 seconds.
Fixes: e251709aaddb ("mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Remove commented-out dead code in netdev_close().
The code was previously commented out and is not needed.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Adrish Bora <adrishbora@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251215063102.1836-1-adrishbora@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch from the deprecated of_property_read_bool() to the common
device_property_read_bool() API. This makes the driver agnostic to
the underlying firmware interface (DT or ACPI) and simplifies the
logic.
Since the driver is no longer strictly dependent on Device Tree,
include <linux/mod_devicetable.h> directly for the struct
of_device_id definition, instead of relying on implicit inclusion
via <linux/of_irq.h>, which has been removed as it is unused.
Also rename apb_ctrl_get_devtree_data() to apb_ctrl_get_fw_data()
to better reflect the agnostic nature of the new implementation.
Signed-off-by: Julio Cesar Carvalho de Paula Souza <julio191096@gmail.com>
Link: https://patch.msgid.link/20251205112138.3431-1-julio191096@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix several instances where operators lacked spaces around them.
This improves readability and brings the driver closer to kernel
coding-style guidelines. No functional change.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Link: https://patch.msgid.link/20251205021417.2705864-3-vivek.balachandhar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The xe_sriov_vfio_migration_supported() function is type bool so
returning -EPERM means returning true. Return false instead.
Fixes: 17f22465c5a5 ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/aTLEZ4g-FD-iMQ2V@stanley.mountain
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
Fix checkpatch error by removing trailing whitespace at line 2021.
Signed-off-by: Arjun Changla <arjunchangla7@gmail.com>
Link: https://patch.msgid.link/20251210084916.4000-1-arjunchangla7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The return value of sdio_alloc_irq() was not stored in status.
If sdio_alloc_irq() fails after rtw_drv_register_netdev() succeeds,
status remains _SUCCESS and the error path skips resource cleanup,
while rtw_drv_init() still returns success.
Store the return value of sdio_alloc_irq() in status and reuse the
existing error handling which relies on status.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Link: https://patch.msgid.link/20251208092730.262499-1-buaajxlj@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vf_migration_init_late() function is supposed to return zero on
success and negative error codes on failure. The error code
eventually gets propagated back to the probe() function and returned.
The problem is it's declared as type bool so it returns true on
error. Change it to type int instead.
Fixes: 2e2dab20dd66 ("drm/xe/vf: Enable VF migration only on supported GuC versions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/aTK9pwJ_roc8vpDi@stanley.mountain
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
|
|
checkpatch.pl reported multiple checks about unnecessary parentheses
when assigning the address of a struct member.
The '->' operator has higher precedence than '&', making the
parentheses redundant. This patch removes them to clean up the code.
Signed-off-by: Nazar Kletskii <nazar.kletskii@gmail.com>
Link: https://patch.msgid.link/20251204115332.21909-1-nazar.kletskii@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since the rtl8723bs driver only uses the crypto library functions and
not the traditional crypto API, select only the required options. This
avoids unnecessary pulling in the full traditional crypto API.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251204061831.499181-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed a coding style issue - please, no space before tabs
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Link: https://patch.msgid.link/20251203163056.121915-1-suunj1331@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the following checkpatch warning for all unnamed arguments:
WARNING: function definition argument should also have an identifier name
No functional changes.
Signed-off-by: Artur Stupa <arthur.stupa@gmail.com>
Link: https://patch.msgid.link/20251128083018.51315-1-arthur.stupa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, acpi_add_pm_notifier() registers wakeup sources under
ACPI companions of the devices affected by the handling of wakeup
events which goes against the rule that a struct acpi_device
can only be a parent of another struct acpi_device.
Moreover, it would be more logically consistent to register wakeup
sources under the devices affected by wakeup events handling which
would cause them to appear in more suitable places in sysfs and would
help to identify the devices they are associated with more easily.
Accordingly, update acpi_add_pm_notifier() to register wakeup sources
under the "target" devices directly instead of registering them under
the ACPI companions of those devices.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/1944126.tdWV9SEqCh@rafael.j.wysocki
|
|
Since pci_acpi_add_bus_pm_notifier() is only suitable for adding ACPI
PM notifiers to root buses, rename it to pci_acpi_add_root_pm_notifier()
and modify it to take an additional "root" argument, which is then used
for passing a PCI root bridge device pointer to acpi_add_pm_notifier().
That function uses it to populate the "dev" field in the context
structure attached to the ACPI device object that will receive the
ACPI "wake" notifications on behalf of the given PCI root bus. The
context structure in question is passed to pci_acpi_wake_bus(), so
the latter can be simplified quite a bit now because the target PCI
host bridge structure address can be derived from "dev".
No intentional functional impact.
This change will also facilitate a subsequent update related to the
registration of wakeup sources.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Kerneldoc comment fixup ]
Link: https://patch.msgid.link/2395263.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The mediated_pmu_account_event() and perf_create_mediated_pmu()
functions implement the exclusion between '!exclude_guest' counters
and mediated vPMUs. Their implementation is basically identical,
except mirrored in what they count/check.
Make sure the actual implementations reflect this similarity.
Notably:
- while perf_release_mediated_pmu() has an underflow check;
mediated_pmu_unaccount_event() did not.
- while perf_create_mediated_pmu() has an inc_not_zero() path;
mediated_pmu_account_event() did not.
Also, the inc_not_zero() path can be outsite of
perf_mediated_pmu_mutex. The mutex must guard the 0->1 (of either
nr_include_guest_events or nr_mediated_pmu_vms) transition, but once a
counter is already non-zero, it can safely be incremented further.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251208115156.GE3707891@noisy.programming.kicks-ass.net
|
|
From the perspective of Intel cstate residency counters, the Airmont NP
(aka Lightning Mountain) is identical to the Airmont.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20251124074846.9653-4-ms@dev.tdt.de
|
|
The Intel / MaxLinear Airmont NP (aka Lightning Mountain) supports the
same architectual and non-architecural events as Airmont.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20251124074846.9653-3-ms@dev.tdt.de
|
|
Like Airmont, the Airmont NP (aka Intel / MaxLinear Lightning Mountain)
supports SMI_COUNT MSR.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://patch.msgid.link/20251124074846.9653-2-ms@dev.tdt.de
|
|
Get rid of superfluous ifdef and return explicit word size depending on
32-bit or 64-bit mode.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251208160352.1363040-5-jremus@linux.ibm.com
|
|
The unwind user framework in general requires an architecture-specific
implementation of unwind_user_word_size() to be present for any unwind
method, whether that is fp or a future other method, such as potentially
sframe.
Guard unwind_user_word_size() by the availability of the UNWIND_USER
framework instead of the specific HAVE_UNWIND_USER_FP method.
This facilitates to selectively disable HAVE_UNWIND_USER_FP on x86
(e.g. for test purposes) once a new unwind method is added to unwind
user.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251208160352.1363040-4-jremus@linux.ibm.com
|
|
This simplifies the code. unwind_user_next_fp() does not need to
return -EINVAL if config option HAVE_UNWIND_USER_FP is disabled, as
unwind_user_start() will then not select this unwind method and
unwind_user_next() will therefore not call it.
Provide (1) a dummy definition of ARCH_INIT_USER_FP_FRAME, if the unwind
user method HAVE_UNWIND_USER_FP is not enabled, (2) a common fallback
definition of unwind_user_at_function_start() which returns false, and
(3) a common dummy definition of ARCH_INIT_USER_FP_ENTRY_FRAME.
Note that enabling the config option HAVE_UNWIND_USER_FP without
defining ARCH_INIT_USER_FP_FRAME triggers a compile error, which is
helpful when implementing support for this unwind user method in an
architecture. Enabling the config option when providing an arch-
specific unwind_user_at_function_start() definition makes it necessary
to also provide an arch-specific ARCH_INIT_USER_FP_ENTRY_FRAME
definition.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251208160352.1363040-3-jremus@linux.ibm.com
|
|
Move the comment "Get the Canonical Frame Address (CFA)" to the top
of the sequence of statements that actually get the CFA. Reword the
comment "Find the Return Address (RA)" to "Get ...", as the statements
actually get the RA. Add a respective comment to the statements that
get the FP. This will be useful once future commits extend the logic
to get the RA and FP.
While at it align the comment on the "stack going in wrong direction"
check to the following one on the "address is word aligned" check.
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251208160352.1363040-2-jremus@linux.ibm.com
|
|
Apply the PERF_PMU_CAP_MEDIATED_VPMU flag for version 2 and later
implementations of the core PMU. Aside from having Global Control and
Status registers, virtualizing the PMU using the mediated model requires
an interface to set or clear the overflow bits in the Global Status MSRs
while restoring or saving the PMU context of a vCPU.
PerfMonV2-capable hardware has additional MSRs for this purpose, namely
PerfCntrGlobalStatusSet and PerfCntrGlobalStatusClr, thereby making it
suitable for use with mediated vPMU.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-14-seanjc@google.com
|
