| Age | Commit message (Collapse) | Author |
|---|
|
A new step has been added to Bspec with respect to the C10 PHY, which
instructs the driver to toggle powerdown value for boths PHY lanes to P0
and then P2 when driving an HDMI connector. This update in the Bspec
reflects the changes required by Wa_14026084006, so document it.
Note that, unlike other display workarounds, this one is actually tied
to the C10 PHY and not to a specific display IP. As such, let's just
document it in intel_cx0_phy.c instead of adding it to
intel_display_wa.c.
Bspec: 64568, 74489
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251216-wa_14026084006-c10-hdmi-toggle-powerdown-v1-2-08677b03e2f1@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
We do not use the function intel_cx0_powerdown_change_sequence()
exclusively to take the PHY out of reset, hence the warning message on
failure is misleading. Furthermore, in an upcoming change, we will also
use that function to implement a new C10 PHY workaround.
Use a more accurate message by saying that we failed to change the
powerdown state.
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20251216-wa_14026084006-c10-hdmi-toggle-powerdown-v1-1-08677b03e2f1@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
|
|
The reset_history attributes are write only. Hence don't report them as
readable just to return -EOPNOTSUPP later on.
Fixes: cbc29538dbf7 ("hwmon: Add driver for LTC4282")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20251219-ltc4282-fix-reset-history-v1-1-8eab974c124b@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix static analysis tool reported issue. Add index bound check before
accessing info array to prevent out of bound.
Fixes: f4e9fc967afd ("drm/xe/xe_survivability: Redesign survivability mode")
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251219105224.871930-6-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Fix sparse warnings. Use static for survivability info attributes.
Fixes: f4e9fc967afd ("drm/xe/xe_survivability: Redesign survivability mode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512101919.G12cuhBJ-lkp@intel.com/
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20251219105224.871930-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The dfl code adds a bus. If it is built-in and there is a built-in driver
as well, the dfl module_init may be called after the driver module_init,
leading to a failure to register the driver as the bus has not been added
yet.
Use subsys_initcall, which guarantees it will be called before the drivers
init code.
Without the fix, we see failures like this:
[ 0.479475] Driver 'intel-m10-bmc' was unable to register with bus_type 'dfl' because the bus was not initialized.
Cc: stable@vger.kernel.org
Fixes: 9ba3a0aa09fe ("fpga: dfl: create a dfl bus type to support DFL devices")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20251215-dfl_subsys-v1-1-21807bad6b10@igalia.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
syzbot reported memleak in debugfs_change_name(). [0]
When lookup_noperm_unlocked() fails, new_name is leaked.
Let's fix it by reusing kfree_const() at the end of
debugfs_change_name().
[0]:
BUG: memory leak
unreferenced object 0xffff8881110bb308 (size 8):
comm "syz.0.17", pid 6090, jiffies 4294942958
hex dump (first 8 bytes):
2e 00 00 00 00 00 00 00 ........
backtrace (crc ecfc7064):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4953 [inline]
slab_alloc_node mm/slub.c:5258 [inline]
__do_kmalloc_node mm/slub.c:5651 [inline]
__kmalloc_node_track_caller_noprof+0x3b2/0x670 mm/slub.c:5759
__kmemdup_nul mm/util.c:64 [inline]
kstrdup+0x3c/0x80 mm/util.c:84
kstrdup_const+0x63/0x80 mm/util.c:104
kvasprintf_const+0xca/0x110 lib/kasprintf.c:48
debugfs_change_name+0xf6/0x5d0 fs/debugfs/inode.c:854
cfg80211_dev_rename+0xd8/0x110 net/wireless/core.c:149
nl80211_set_wiphy+0x102/0x1770 net/wireless/nl80211.c:3844
genl_family_rcv_msg_doit+0x11e/0x190 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x2fd/0x440 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x93/0x1d0 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3a3/0x4f0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x335/0x6b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg net/socket.c:733 [inline]
____sys_sendmsg+0x562/0x5a0 net/socket.c:2608
___sys_sendmsg+0xc8/0x130 net/socket.c:2662
__sys_sendmsg+0xc7/0x140 net/socket.c:2694
Fixes: 833d2b3a072f7 ("Add start_renaming_two_dentries()")
Reported-by: syzbot+3d7ca9c802c547f8550a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69369d82.a70a0220.38f243.009f.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251208094551.46184-1-kuniyu@google.com
[ Fix minor typo in commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
@xilinx.com is still working but better to switch to new amd.com after
AMD/Xilinx acquisition.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/49de9536c9952a3a36bb996f2fb0a1f0efb1ba6f.1765787307.git.michal.simek@amd.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
When parsing the region bridge list from the "fpga-bridges" device tree
property, the of-fpga-region driver will silently ignore bridges which fail
to be obtained, for example due to a missing bridge driver or invalid
phandle.
This can lead to hardware issues if a region bridge stays coupled when
partial programming is performed.
Fail if any of the bridges specified in "fpga-bridges" cannot be obtained.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://lore.kernel.org/r/20251127-of-fpga-region-fail-if-bridges-not-found-v1-1-ca674f8d07eb@bootlin.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
|
|
Replace sprintf() calls with sysfs_emit() to follow current kernel
coding standards.
sysfs_emit() is the preferred method for formatting sysfs output as it
provides better bounds checking and is more secure.
Signed-off-by: Madhur Kumar <madhurkumar004@gmail.com>
Link: https://patch.msgid.link/20251214083659.2412218-1-madhurkumar004@gmail.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo adjusted commit message while pushing it]
|
|
It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.
Add missing target for mt8395-radxa hd panel overlay.
Fixes: 4c8ff61199a7 ("arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251205215940.19287-1-linux@fw-web.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Build devicetree binaries for testing overlays and providing users
full dtb without using overlays for Bananapi R4 (pro) variants.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://patch.msgid.link/20251119175124.48947-3-linux@fw-web.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Build devicetree binaries for testing overlays and providing users
full dtb without using overlays.
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Fixes: a58c36806741 ("arm64: dts: mediatek: mt7988a-bpi-r4pro: Add mmc overlays")
Fixes: dec929e61a42 ("arm64: dts: mediatek: mt7988a-bpi-r4-pro: Add PCIe overlays")
Fixes: 714a80ced07a ("arm64: dts: mediatek: mt7988a-bpi-r4: Add dt overlays for sd + emmc")
Fixes: 312189ebb802 ("arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3")
Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3")
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251119175124.48947-2-linux@fw-web.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Since commit eb972eab0794 ("lkdtm/bugs: Add cases for BUG and PANIC
occurring in hardirq context"), building with clang for x86_64 results
in the following warnings:
vmlinux.o: warning: objtool: lkdtm_PANIC_IN_HARDIRQ(): unexpected end of section .text.lkdtm_PANIC_IN_HARDIRQ
vmlinux.o: warning: objtool: lkdtm_BUG_IN_HARDIRQ(): unexpected end of section .text.lkdtm_BUG_IN_HARDIRQ
caused by busy "while (wait_for_...);" loops. Add READ_ONCE() and
cpu_relax() to better indicate the intention and avoid any unwanted
compiler optimisations.
Fixes: eb972eab0794 ("lkdtm/bugs: Add cases for BUG and PANIC occurring in hardirq context")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512190111.jxFSqxUH-lkp@intel.com/
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There is no reason to accept an invalid minimum/maximum DSC source input
BPP value (i.e a minimum DSC input BPP value above the maximum pipe BPP
or a maximum DSC input BPP value below the minimum pipe BPP value), fail
the state computation in these cases.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-17-imre.deak@intel.com
|
|
There is no reason to accept an invalid maximum sink compressed BPP
value (i.e. 0), fail the state computation in this case.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-16-imre.deak@intel.com
|
|
There is no reason to accept a minimum/maximum link BPP value above the
maximum throughput BPP value, fail the state computation in this case.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-15-imre.deak@intel.com
|
|
Make sure that state computation fails if the minimum/maximum link BPP
values got invalid as a result of limiting both of these values
separately to the corresponding source/sink capability limits.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-14-imre.deak@intel.com
|
|
and eDP
The pipe joiner maximum compressed BPP must be limited based on the pipe
joiner memory size and BW, do that for all DP outputs by adjusting the
max compressed BPP value already in
intel_dp_compute_config_link_bpp_limits() (which is used by all output
types).
This way the BPP doesn't need to be adjusted in
dsc_compute_compressed_bpp() (called for DP-SST after the above limits
were computed already), so remove the adjustment from there.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-13-imre.deak@intel.com
|
|
A DSC compressed stream requires FEC (except for eDP), which has a BW
overhead on non-UHBR links that must be accounted for explicitly. Do
that during computing the required BW.
Note that the overhead doesn't need to be accounted for on UHBR links
where FEC is always enabled and so the corresponding overhead is part of
the channel coding efficiency instead (i.e. the overhead is part of the
available vs. the required BW).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-12-imre.deak@intel.com
|
|
On MST links the symbol alignment and SSC have a BW overhead, which
should be accounted for when calculating the required stream BW, do so
during mode validation for an uncompressed stream.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-11-imre.deak@intel.com
|
|
Use intel_dp_effective_data_rate() to calculate the required link BW for
compressed streams on non-UHBR DP-SST links. This ensures that the BW is
calculated the same way for all DP output types and DSC/non-DSC modes,
during mode validation as well as during state computation.
This approach also allows for accounting with BW overhead due to DSC,
FEC being enabled on a link. Acounting for these will be added by
follow-up changes.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-10-imre.deak@intel.com
|
|
Use intel_dp_effective_data_rate() to calculate the required link BW for
eDP, DP-SST and MST links. This ensures that the BW is calculated the
same way for all DP output types, during mode validation as well as
during state computation. This approach also allows for accounting with
BW overheads due to the SSC, DSC, FEC being enabled on a link, as well
as due to the MST symbol alignment on the link. Accounting for these
overheads will be added by follow-up changes.
This way also computes the stream BW on a UHBR link correctly, using the
corresponding symbol size to effective data size ratio (i.e. ~97% link
BW utilization for UHBR vs. only ~80% for non-UHBR).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-9-imre.deak@intel.com
|
|
is_bw_sufficient_for_dsc_config() should return true if the required BW
equals the available BW, make it so.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-8-imre.deak@intel.com
|
|
Factor out intel_dp_link_bw_overhead(), used later for BW calculation
during DP SST mode validation and state computation.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-7-imre.deak@intel.com
|
|
The encoder state computation should use the
drm_display_mode::crtc_clock member, instead of the clock member, the
former one possibly having a necessary adjustment wrt. to the latter
due to driver specific constraints. In practice the two values should
not differ at spots changed in this patch, since only MSO and 3D modes
would make them different, neither MSO or 3D relevant here, but still
use the expected crtc_clock version for consistency.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-6-imre.deak@intel.com
|
|
Convert intel_dp_output_bpp() and intel_dp_mode_min_output_bpp() to
return an x16 fixed point bpp value, as this value will be always the
link BPP (either compressed or uncompressed) tracked in the same x16
fixed point format.
While at it rename
intel_dp_output_bpp() to intel_dp_output_format_link_bpp_x16() and
intel_dp_mode_min_output_bpp() to intel_dp_mode_min_link_bpp_x16() to
better reflect that these functions return an x16 link BPP value
specific to a particular output format or mode.
Also rename intel_dp_output_bpp()'s bpp parameter to pipe_bpp, to
clarify which kind of (pipe vs. link) BPP the parameter is.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-5-imre.deak@intel.com
|
|
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count, fix
intel_dp_dsc_get_slice_count() accordingly.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-4-imre.deak@intel.com
|
|
A DSC sink supporting DSC slice count N, not necessarily supports slice
counts less than N. Hence the driver should check the sink's support for
a particular slice count before using that slice count. Add the helper
functions required for this.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-3-imre.deak@intel.com
|
|
eDP 1.5 supports all the slice counts reported via DP_DSC_SLICE_CAP_1,
so adjust drm_dp_dsc_sink_max_slice_count() accordingly.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251215192357.172201-2-imre.deak@intel.com
|
|
Define the SpacemiT P1 PMIC voltage regulators and their constraints.
The power management hardware design on the Milk-V Jupiter is identical to
the Banana Pi BPI-F3, so the DT Nodes were taken from k1-bananapi-f3.dts.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251206134532.1741648-4-javierm@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Define the DC power input and the 4v power as fixed regulator supplies.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251206134532.1741648-3-javierm@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The adapter is used to access the SpacemiT P1 PMIC present in this board.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20251206134532.1741648-2-javierm@redhat.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
The original link returns a 404, so I update it to the latest
accessible url.
No functional change to any code, only documentation updates.
Signed-off-by: Ziran Zhang <zhangcoder@yeah.net>
Link: https://patch.msgid.link/20251217061737.6079-1-zhangcoder@yeah.net
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two commits add support for 6 amps with feedback, primarily for
the CDB35L56-EIGHT-C and CDB35L63-CB8 and similar hardware.
|
|
Merge series from Alexander Stein <alexander.stein@ew.tq-group.com>:
this series fixes the error regarding duplicate debugfs directory creation on
TQMa8MPxL (imx8mp) when easrc is enabled:
debugfs: '30c90000.easrc' already exists in 'tqm-tlv320aic32'
This is caused because fsl_easrc adds two components which use the device name
as component name. Debugfs directories for each component is created, resulting
on name conflict. Fix this by adding the debugfs_prefix for both component
drivers.
Before:
$ ls /sys/kernel/debug/asoc/tqm-tlv320aic32/
30c30000.sai 30c90000.easrc HiFi-ASRC-FE dapm dapm_pop_time
dma:30c30000.sai tlv320aic32x4.1-0018
After:
$ ls /sys/kernel/debug/asoc/tqm-tlv320aic32/
30c30000.sai HiFi-ASRC-FE asrc:30c90000.easrc dapm dapm_pop_time
dma:30c30000.sai easrc:30c90000.easrc tlv320aic32x4.1-0018
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Add support for TAS2563 amplifier on Intel platforms.
|
|
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
Add some Kcontrols for ES8326
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
We support bytes control type for set and get, but these are module specific
controls and there is no way to handle notifications from them in a generic way.
Each control have module specific param_id and this param_id is only valid in
the module's scope, other modules might use the same id for different functions
for example.
This series will add a new generic control type, similar to the existing ones
for ENUM and SWITCH, which can be used to create bytes controls which can send
notifications from firmware on change.
The new param_id is 202 and the sof_ipc4_control_msg_payload is updated to
describe bytes payload also.
On set, the payload must include the sof_ipc4_control_msg_payload struct with
the control's ID and data size, followed by the data.
On get, the kernel needs to send the sof_ipc4_control_msg_payload struct along
with the LARGE_CONFIG_GET message as payload with the ID of the control that
needs to be retrieved. The raw data is received back without additional header.
A notification might contain data, in this case the num_elems reflects the size
in bytes, or without data. If no data is received then the control is marked as
dirty and on read the kernel will refresh the data from firmware.
The series includes mandatory fixes for existing code and adds support for
sending payload with LARGE_CONFIG_GET when the param_id is either generic ENUM,
SWITCH or BYTES control.
|
|
On 32‑bit systems, phys_addr_t is defined as u32. However, parisc
expects physical addresses to be 64‑bit values so it can store a
validity bit in the upper byte.
Resolve this mismatch by casting the physical address to unsigned
long, ensuring it is treated as a 64‑bit value where required. This
fixes the failure to start block device drivers on the C3700
platform, as reported by Guenter.
QEMU command line to reproduce the issue (with Debian SID as rootfs):
qemu-system-hppa -machine C3700 \
-kernel arch/parisc/boot/bzImage \
-append "console=ttyS0 \
root=/dev/sda rw rootwait panic=-1" \
-nographic \
-device lsi53c895a \
-drive file=rootfs-hppa.img,if=none,format=raw,id=hd0 \
-device scsi-hd,drive=hd0
Fixes: 96ddf2ef58ec ("parisc: Convert DMA map_page to map_phys interface")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/b184f1bf-96dc-4546-8512-9cba5ecb58f7@roeck-us.net/
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
[mszyprow: dropped the lpa() macro removal]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251218-fix-parisc-conversion-v1-1-4a04d26b0168@nvidia.com
|
|
Commit 33729a5fc0ca ("iommu/io-pgtable-arm: Remove split on unmap
behavior") did away with the treatment of partial unmaps of huge IOPTEs.
In the case of Panthor, that means an attempt to run a VM_BIND unmap
operation on a memory region whose start address and size aren't 2MiB
aligned, in the event it intersects with a huge page, would lead to ARM
IOMMU management code to fail and a warning being raised.
Presently, and for lack of a better alternative, it's best to have
Panthor handle partial unmaps at the driver level, by unmapping entire
huge pages and remapping the difference between them and the requested
unmap region.
This could change in the future when the VM_BIND uAPI is expanded to
enforce huge page alignment and map/unmap operational constraints that
render this code unnecessary.
When a partial unmap for a huge PTE is attempted, we also need to expand
the locked region to encompass whole huge pages.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251217213252.677020-2-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
|
The CTCU device for monaco shares the same configurations as SA8775p. Add
a fallback to enable the CTCU for monaco to utilize the compitable of the
SA8775p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251103-enable-ctcu-for-monaco-v4-1-92ff83201584@oss.qualcomm.com
|
|
Merge series from Alain Volmat <alain.volmat@foss.st.com>:
The series fixes a stability issue when dealing with <8bpw
transfers, as well as enforce an error if the DMA information
provided within the DT are incorrect.
Performance enhancement is also provided by allowing a polling
mode which is triggered when the transfer is so short that
polling mode transfer would lead to faster transfer than
if it was done in a interrupt driven manner.
|
|
Correct the read register for the setting of max input size and
interrupt delay.
Fixes: 22da60f0304b ("HID: Intel-thc-hid: Intel-thc: Introduce interrupt delay control")
Fixes: 45e92a093099 ("HID: Intel-thc-hid: Intel-thc: Introduce max input size control")
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Some VTL-class touchpads (e.g. TOPS0102:00 35CC:0104) intermittently
fail to release a finger contact. A previous slot remains logically
active, accompanied by stale BTN_TOOL_DOUBLETAP state, causing
gestures to stay latched and resulting in stuck two-finger
scrolling and false right-clicks.
Apply MT_QUIRK_STICKY_FINGERS to handle the unreleased contact correctly.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1225
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Some systems have enabled ISH without any sensors. In this case sending
HOSTIF_DM_ENUM_DEVICES results in 0 sensors. This triggers ISH hardware
reset on subsequent enumeration after S3/S4 resume.
The enum_devices_done flag was not reset before sending the
HOSTIF_DM_ENUM_DEVICES command. On subsequent enumeration calls (such as
after S3/S4 resume), this flag retains its previous true value, causing the
wait loop to be skipped and returning prematurely to hid_ishtp_cl_init().
If 0 HID devices are found, hid_ishtp_cl_init() skips getting HID device
descriptors and sets init_done to true. When the delayed enumeration
response arrives with init_done already true, the driver treats it as a bad
packet and triggers an ISH hardware reset.
Set enum_devices_done to false before sending the enumeration command,
consistent with similar functions like ishtp_get_hid_descriptor() and
ishtp_get_report_descriptor() which reset their respective flags.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The ishtp_cl_bus_match() function previously only checked the first entry
in the driver's device ID table. Update it to iterate over the entire
table, allowing proper matching for drivers with multiple supported
protocol GUIDs.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Save the number of entries in struct thc_dma_configuration.
Fixes: a688404b2e20 ("HID: intel-thc-hid: intel-thc: Add THC DMA interfaces")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
When a new PlayStation gamepad (DualShock 4 or DualSense) is initialized,
the input subsystem sets the default value for its absolute axes (e.g.,
ABS_X, ABS_Y) to 0.
However, the hardware's actual neutral/resting state for these joysticks
is 128 (0x80). This creates a mismatch.
When the first HID report arrives from the device, the driver sees the
resting value of 128. The kernel compares this to its initial state of 0
and incorrectly interprets this as a delta (0 -> 128). Consequently, it
generates EV_ABS events for this initial, non-existent movement.
This behavior can fail userspace 'sanity check' tests (e.g., in
Android CTS) that correctly assert no motion events should be generated
from a device that is already at rest.
This patch fixes the issue by explicitly setting the initial value of the
main joystick axes (e.g., ABS_X, ABS_Y, ABS_RX, ABS_RY) to 128 (0x80)
in the common ps_gamepad_create() function.
This aligns the kernel's initial state with the hardware's expected
neutral state, ensuring that the first report (at 128) produces no
delta and thus, no spurious event.
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
Ensure all related groups are evicted and suspended before VM
destruction takes place.
This fixes an issue where panthor_vm_destroy() destroys and unmaps the
heap context while there are still on slot groups using this.
The FW will do a write out to the heap context when a CSG (group) is
suspended, so a premature unmap of the heap context will cause a
GPU page fault.
This page fault is quite harmless, and do not affect the continued
operation of the GPU.
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251219093546.1227697-1-ketil.johnsen@arm.com
Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
|
