| Age | Commit message (Collapse) | Author |
|---|
|
Like FPU exception handler, check LSX capability in the LSX exception
handler rather than function kvm_own_lsx(). Since LSX capability in
the function kvm_guest_has_lsx() implies FPU capability, only checking
kvm_guest_has_lsx() is OK here.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Register LOONGARCH_CSR_IPR is interrupt priority setting for nested
interrupt handling. Though LoongArch Linux AVEC driver does not use
this register, KVM hypervisor needs to save and restore this it during
vCPU context switch. Because Linux AVEC driver may use this register
in future, or other OS may use it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
During message interrupt handling and relative CSR registers saving and
restore, it is better to check VM msgint feature rather than host msgint
feature, because VM may disable this feature even if host supports this.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add flag HW_GCSR with msgint registers in function kvm_init_gcsr_flag().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
VM feature detection is sparsed in function kvm_vm_init_features() and
kvm_vm_feature_has_attr(). Here move all the features detection in
function kvm_vm_init_features(), and there is only feature checking in
function kvm_vm_feature_has_attr().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
With new CPU cores there are more features supported which are indicated
in CPUCFG2 bits 24:30 and CPUCFG3 bits 17:23. The KVM hypervisor cannot
enable or disable (most of) these features and there is no KVM exception
when instructions of these features are executed in guest mode.
Here add more CPUCFG mask support with LA664 CPU type.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Fix the pixel normalization handling for xe3p_lpd display
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patch.msgid.link/aYROngKfyUIyoQW0@jlahtine-mobl
|
|
Merge series from "Miquel Raynal (Schneider Electric)" <miquel.raynal@bootlin.com>:
This series adds support for the QSPI controller available on Renesas
RZ/N1S and RZ/N1D SoC. It has been tested with a custom board (see last
SPI patch for details), but has been tested by Wolfram (thank you!) on
the DB board.
Link: https://lore.kernel.org/linux-devicetree/20260116114852.52948-2-wsa+renesas@sang-engineering.com/
Adding support for this SoC required a few adaptations to the Cadence
QSPI driver which have already been merged (except one regarding clocks
handling). This series contains the remaining patches, the ones actually
adding support for the RZ/N1 flavour.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Revert of a change for loop, which caused regressions for some users
(Actually revert of two commits, where one is just an existing fix
for the offending commit)
- NVMe pull via Keith:
- Fix NULL pointer access setting up dma mappings
- Fix invalid memory access from malformed TCP PDU
* tag 'block-6.19-20260205' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
loop: revert exclusive opener loop status change
nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec
nvme-pci: handle changing device dma map requirements
|
|
Merge series from Sebastian Reichel <sebastian.reichel@collabora.com>:
I'm currently working on DisplayPort audio support for the Rockchip
RK3588/RK3576 SoCs, which preferrably use S/PDIF as DAI source.
Apparently the upstream Rockchip S/PDIF driver is lacking a couple of
features right now, which are necessary to get things going (i.e.
setting the sysclk from the machine driver). I found the missing bits
in Rockchip's 6.1 BSP kernel and ported them over. This series effectly
brings the mainline kernel on-par with the BSP driver, but also contains
a couple of cleanup patches of my own to bring the driver to the modern
age.
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Some new Dell models use spare pins on the amp as a binary integer
value to indicate the speaker type. The driver must use this to
select the correct firmware files for the hardware.
Patch #1 is the new support.
The other patches are for KUnit testing.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Two small fixes for zcrx
- Two small fixes for fdinfo - one is just killing a superflous newline
* tag 'io_uring-6.19-20260205' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/fdinfo: be a bit nicer when looping a lot of SQEs/CQEs
io_uring/fdinfo: kill unnecessary newline feed in CQE32 printing
io_uring/zcrx: fix rq flush locking
io_uring/zcrx: fix page array leak
|
|
When !CONFIG_TRANSPARENT_HUGEPAGE, a non-folio compound page can appear in
a userspace mapping via either vm_insert_*() functions or
vm_operatios_struct->fault(). They are not folios, thus should not be
considered for folio operations like split. To reject these pages, make
sure get_hwpoison_page() is always called as HWPoisonHandlable() will do
the right work.
[Some commit log borrowed from Zi Yan. Thanks.]
Link: https://lkml.kernel.org/r/20260205075328.523211-1-linmiaohe@huawei.com
Fixes: 689b8986776c ("mm/memory-failure: improve large block size folio handling")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: 是参差 <shicenci@gmail.com>
Closes: https://lore.kernel.org/all/PS1PPF7E1D7501F1E4F4441E7ECD056DEADAB98A@PS1PPF7E1D7501F.apcprd02.prod.outlook.com/
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix PROCMAP_QUERY to fetch optional build ID only after dropping mmap_lock
or per-VMA lock, whichever was used to lock VMA under question, to avoid
deadlock reported by syzbot:
-> #1 (&mm->mmap_lock){++++}-{4:4}:
__might_fault+0xed/0x170
_copy_to_iter+0x118/0x1720
copy_page_to_iter+0x12d/0x1e0
filemap_read+0x720/0x10a0
blkdev_read_iter+0x2b5/0x4e0
vfs_read+0x7f4/0xae0
ksys_read+0x12a/0x250
do_syscall_64+0xcb/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&sb->s_type->i_mutex_key#8){++++}-{4:4}:
__lock_acquire+0x1509/0x26d0
lock_acquire+0x185/0x340
down_read+0x98/0x490
blkdev_read_iter+0x2a7/0x4e0
__kernel_read+0x39a/0xa90
freader_fetch+0x1d5/0xa80
__build_id_parse.isra.0+0xea/0x6a0
do_procmap_query+0xd75/0x1050
procfs_procmap_ioctl+0x7a/0xb0
__x64_sys_ioctl+0x18e/0x210
do_syscall_64+0xcb/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&mm->mmap_lock);
lock(&sb->s_type->i_mutex_key#8);
lock(&mm->mmap_lock);
rlock(&sb->s_type->i_mutex_key#8);
*** DEADLOCK ***
This seems to be exacerbated (as we haven't seen these syzbot reports
before that) by the recent:
777a8560fd29 ("lib/buildid: use __kernel_read() for sleepable context")
To make this safe, we need to grab file refcount while VMA is still locked, but
other than that everything is pretty straightforward. Internal build_id_parse()
API assumes VMA is passed, but it only needs the underlying file reference, so
just add another variant build_id_parse_file() that expects file passed
directly.
[akpm@linux-foundation.org: fix up kerneldoc]
Link: https://lkml.kernel.org/r/20260129215340.3742283-1-andrii@kernel.org
Fixes: ed5d583a88a9 ("fs/procfs: implement efficient VMA querying API for /proc/<pid>/maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reported-by: <syzbot+4e70c8e0a2017b432f7a@syzkaller.appspotmail.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Link: https://lore.kernel.org/netdev/20251109134600.292125-1-zhaoyz24@mails.tsinghua.edu.cn/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260203192509.682208-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tipc_aead_users_dec() calls rcu_dereference(aead) twice: once to store
in 'tmp' for the NULL check, and again inside the atomic_add_unless()
call.
Use the already-dereferenced 'tmp' pointer consistently, matching the
correct pattern used in tipc_aead_users_inc() and tipc_aead_users_set().
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260203145621.17399-1-git@danielhodges.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bond_update_speed_duplex() first set speed/duplex to unknown and
then asks slave driver for current speed/duplex. Since getting
speed/duplex might take longer there is a race, where this false state
is visible by /proc/net/bonding. With commit 691b2bf14946 ("bonding:
update port speed when getting bond speed") this race gets more visible,
if user space is calling ethtool on a regular base.
Fix this by only setting speed/duplex to unknown, if link speed is
really unknown/unusable.
Fixes: 98f41f694f46 ("bonding:update speed/duplex for NETDEV_CHANGE")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260203141153.51581-1-tbogendoerfer@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During a kexec reboot the hardware is not power-cycled, so AF state from
the old kernel can persist into the new kernel. When AF and PF drivers
are built as modules, the PF driver may probe before AF reinitializes
the hardware.
The PF driver treats the RVUM block revision as an indication that AF
initialization is complete. If this value is left uncleared at shutdown,
PF may incorrectly assume AF is ready and access stale hardware state,
leading to a crash.
Clear the RVUM block revision during AF shutdown to avoid PF
mis-detecting AF readiness after kexec.
Fixes: 54494aa5d1e6 ("octeontx2-af: Add Marvell OcteonTX2 RVU AF driver")
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260203050701.2616685-1-agaur@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
call_rcu_tasks_trace() is not safe from in_nmi() and not reentrant.
To prevent deadlock on raw_spin_lock_rcu_node(rtpcp) or memory corruption
defer to irq_work when IRQs are disabled. call_rcu_tasks_generic()
protects itself with local_irq_save().
Note when bpf_async_cb->refcnt drops to zero it's safe to reuse
bpf_async_cb->worker for a different irq_work callback, since
bpf_async_schedule_op() -> irq_work_queue(&cb->worker);
is only called when refcnt >= 1.
Fixes: 1bfbc267ec91 ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com
|
|
The COMMAND1 register bits [29:28] set the SPI mode, which controls
the clock idle level. When a transfer ends, tegra_spi_transfer_end()
writes def_command1_reg back to restore the default state, but this
register value currently lacks the mode bits. This results in the
clock always being configured as idle low, breaking devices that
need it high.
Fix this by storing the mode bits in def_command1_reg during setup,
to prevent this field from always being cleared.
Fixes: f333a331adfa ("spi/tegra114: add spi driver")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20260204141212.1540382-1-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull dcache fixes from Al Viro:
"A couple of regression fixes for the tree-in-dcache series this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
functionfs: use spinlock for FFS_DEACTIVATED/FFS_CLOSING transitions
rust_binderfs: fix a dentry leak
|
|
When all files are closed, functionfs needs ffs_data_reset() to be
done before any further opens are allowed.
During that time we have ffs->state set to FFS_CLOSING; that makes
->open() fail with -EBUSY. Once ffs_data_reset() is done, it
switches state (to FFS_READ_DESCRIPTORS) indicating that opening
that thing is allowed again. There's a couple of additional twists:
* mounting with -o no_disconnect delays ffs_data_reset()
from doing that at the final ->release() to the first subsequent
open(). That's indicated by ffs->state set to FFS_DEACTIVATED;
if open() sees that, it immediately switches to FFS_CLOSING and
proceeds with doing ffs_data_reset() before returning to userland.
* a couple of usb callbacks need to force the delayed
transition; unfortunately, they are done in locking environment
that does not allow blocking and ffs_data_reset() can block.
As the result, if these callbacks see FFS_DEACTIVATED, they change
state to FFS_CLOSING and use schedule_work() to get ffs_data_reset()
executed asynchronously.
Unfortunately, the locking is rather insufficient. A fix attempted
in e5bf5ee26663 ("functionfs: fix the open/removal races") had closed
a bunch of UAF, but it didn't do anything to the callbacks, lacked
barriers in transition from FFS_CLOSING to FFS_READ_DESCRIPTORS
_and_ it had been too heavy-handed in open()/open() serialization -
I've used ffs->mutex for that, and it's being held over actual IO on
ep0, complete with copy_from_user(), etc.
Even more unfortunately, the userland side is apparently racy enough
to have the resulting timing changes (no failures, just a delayed
return of open(2)) disrupt the things quite badly. Userland bugs
or not, it's a clear regression that needs to be dealt with.
Solution is to use a spinlock for serializing these state checks and
transitions - unlike ffs->mutex it can be taken in these callbacks
and it doesn't disrupt the timings in open().
We could introduce a new spinlock, but it's easier to use the one
that is already there (ffs->eps_lock) instead - the locking
environment is safe for it in all affected places.
Since now it is held over all places that alter or check the
open count (ffs->opened), there's no need to keep that atomic_t -
int would serve just fine and it's simpler that way.
Fixes: e5bf5ee26663 ("functionfs: fix the open/removal races")
Fixes: 18d6b32fca38 ("usb: gadget: f_fs: add "no_disconnect" mode") # v4.0
Tested-by: Samuel Wu <wusamuel@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Parallel to binderfs patches - 02da8d2c0965 "binderfs_binder_ctl_create():
kill a bogus check" and the bit of b89aa544821d "convert binderfs" that
got lost when making 4433d8e25d73 "convert rust_binderfs"; the former is
a cleanup, the latter is about marking /binder-control persistent, so that
it would be taken out on umount.
Fixes: 4433d8e25d73 ("convert rust_binderfs")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Convert the driver to use FIELD_PREP to increase readability.
This also fixes an issue that the SDPIF_CFGR_VDW_MASK was wrong,
which didn't have any effects as the only user in the driver
updates the other bits at the same time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-10-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support to fill IEC958 channel status information.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-9-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Treat 32 bit sample width as if it was 24 bits using only the
24 most significant bits.
[I've merged the channel-swapping fix from Zohn Ni into Sugar Zhang's
patch introducing the problem in the first place]
Co-developed-by: Zohn Ni <zohn.ni@rock-chips.com>
Signed-off-by: Zohn Ni <zohn.ni@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-8-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allow setting the mclk rate from the machine driver.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-7-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PCM should be registered before the DAI component, as the second one
triggers snd_soc_try_rebind_card.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-6-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The hardware supports all sample rates up to 192kHz.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-5-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cleanup the probe routine a little bit by using dev_err_probe
instead of dev_err.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-4-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver mixes device managed resources with unmanaged ones
and (as a lot of them do) gets the order wrong resulting in
potential race condition problems at module removal time. Let's
go to full device managed resources to cleanup the code and get
rid of the potential race condition.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-3-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move rk_spdif_match DT compatible table to the usual place before the
platform-driver struct definition and drop the useless of_match_ptr(),
since it is fine to reference the DT id table even when OF support is
disabled (which makes the driver useless anyways).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-2-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use device_get_match_data(), so that the probe routine does not
directly reference the of_match_table. This allows moving the
table at the end of the file where most recent drivers have it.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260203-rockchip-spdif-cleanup-and-bsp-sync-v2-1-4412016cf577@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas RZ/N1 QSPI controllers embed a modified version of the Cadence
IP with the following settings:
- a limited bus clock range
- no DTR support
- no DMA
- no useful interrupt flag
- only direct accesses (no INDAC mode)
- write protection
The controller has been tested by running the SPI NOR check list with a
custom RZ/N1D400 based board mounted with a Spansion s25fl128s1 quad
SPI.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260205-schneider-6-19-rc1-qspi-v5-3-843632b3c674@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This controller can be fed by either a main "ref" clock, or three clocks
("ref" again, "ahb", "apb"). In practice, it is likely that all
controllers have the same inputs, but a single clock feeds the three
interfaces (ref is used for controlling the external interface, ahb/apb
the internal ones). Handling these clocks is in no way SoC specific,
only the number of expected clocks may change. Plus, we will soon be
adding another controller requiring an AHB and an APB clock as well, so
it is time to align the whole clock handling.
Furthermore, the use of the cqspi_jh7110_clk_init() helper, which
specifically grabs and enables the "ahb" and "apb" clocks, is a bit
convoluted:
- only the JH7110 compatible provides the ->jh7110_clk_init() callback,
- in the probe, if the above callback is set in the driver data, the
driver does not call the callback (!) but instead calls the helper
directly (?),
- in the helper, the is_jh7110 boolean is set.
This logic does not make sense. Instead:
- in the probe, set the is_jh7110 boolean based on the compatible,
- collect all available clocks with the "bulk" helper,
- enable the extra clocks if they are available,
- kill the SoC specific cqspi_jh7110_clk_init() helper.
This also allows to group the clock handling instead of depending on the
driver data pointer, which further simplifies the error path and the
remove callback.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260205-schneider-6-19-rc1-qspi-v5-2-843632b3c674@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for the Renesas RZ/N1D400 QSPI controller.
This SoC is identified in the bindings with its other name: r9a06g032.
It is part of the RZ/N1 family, which contains a "D" and a "S"
variant. IPs in this SoC are typically described using 2 compatibles:
the SoC specific compatible and the family compatible. The original
Cadence IP compatible is dropped because it is unusable on its own.
Indirect accesses are not supported by this flavour of the Cadence IP,
which means several properties have no meaning in the scope of the
Renesas compatible. Let's make sure they are no longer expected nor
mandatory.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260205-schneider-6-19-rc1-qspi-v5-1-843632b3c674@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
io_register_pbuf_ring() ignores the return value of io_buffer_add_list(),
which can fail if xa_store() returns an error (e.g., -ENOMEM). When this
happens, the function returns 0 (success) to the caller, but the
io_buffer_list structure is neither added to the xarray nor freed.
In practice this requires failure injection to hit, hence not a real
issue. But it should get fixed up none the less.
Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This just add some information on kernel log about the selected ECC
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
We need to set also write_page_raw in ecc structure to allow
choosing SW ECC instead of HW one, otherwise write operation fail.
Fixes: 08d8c62164a322 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc9).
No adjacent changes, conflicts:
drivers/net/ethernet/spacemit/k1_emac.c
3125fc1701694 ("net: spacemit: k1-emac: fix jumbo frame support")
f66086798f91f ("net: spacemit: Remove broken flow control support")
https://lore.kernel.org/aYIysFIE9ooavWia@sirena.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and Netfilter.
Previous releases - regressions:
- eth: stmmac: fix stm32 (and potentially others) resume regression
- nf_tables: fix inverted genmask check in nft_map_catchall_activate()
- usb: r8152: fix resume reset deadlock
- fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for RSS contexts
Previous releases - always broken:
- sched: cls_u32: use skb_header_pointer_careful() to avoid OOB reads
with malicious u32 rules
- eth: ice: timestamping related fixes"
* tag 'net-6.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
net: cpsw_new: Execute ndo_set_rx_mode callback in a work queue
gve: Correct ethtool rx_dropped calculation
gve: Fix stats report corruption on queue count change
selftest: net: add a test-case for encap segmentation after GRO
net: gro: fix outer network offset
net: add proper RCU protection to /proc/net/ptype
net: ethernet: adi: adin1110: Check return value of devm_gpiod_get_optional() in adin1110_check_spi()
wifi: iwlwifi: mvm: pause TCM on fast resume
wifi: iwlwifi: mld: cancel mlo_scan_start_wk
net: spacemit: k1-emac: fix jumbo frame support
net: enetc: Convert 16-bit register reads to 32-bit for ENETC v4
net: enetc: Convert 16-bit register writes to 32-bit for ENETC v4
net: enetc: Remove CBDR cacheability AXI settings for ENETC v4
net: enetc: Remove SI/BDR cacheability AXI settings for ENETC v4
tipc: use kfree_sensitive() for session key material
net: stmmac: fix stm32 (and potentially others) resume regression
net: rss: fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for contexts
...
|
|
Currently we are registering one dynamic lockdep key for each allocated
qdisc, to avoid false deadlock reports when mirred (or TC eBPF) redirects
packets to another device while the root lock is acquired [1].
Since dynamic keys are a limited resource, we can save them at least for
qdiscs that are not meant to acquire the root lock in the traffic path,
or to carry traffic at all, like:
- clsact
- ingress
- noqueue
Don't register dynamic keys for the above schedulers, so that we hit
MAX_LOCKDEP_KEYS later in our tests.
[1] https://github.com/multipath-tcp/mptcp_net-next/issues/451
Changes in v2:
- change ordering of spin_lock_init() vs. lockdep_register_key()
(Jakub Kicinski)
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/94448f7fa7c4f52d2ce416a4895ec87d456d7417.1770220576.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
imx_rpmsg_probe() calls snd_soc_find_dai() without holding client_mutex.
However, snd_soc_find_dai() has lockdep_assert_held(&client_mutex)
indicating callers must hold this lock, as the function iterates over the
global component list.
All other callers of snd_soc_find_dai() either hold client_mutex via the
snd_soc_bind_card() path or use the snd_soc_find_dai_with_mutex() wrapper.
Use snd_soc_find_dai_with_mutex() instead to fix the missing lock
protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205052429.4046903-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When looking at the iMX93 documentation, the definitions in the driver
do not correspond with the documentation, which makes the driver
confusing.
The driver, for example, re-uses a definition for bit 0 for two
different registers, where this bit have completely different purposes.
Fix this by renaming the second register, and adding a definition that
reflects the true purpose of bit 0 in the first register (EQOS enable.)
Replace MX93_GPR_ENET_QOS_INTF_MODE_MASK with MX93_GPR_ENET_QOS_ENABLE
and MX93_GPR_ENET_QOS_INTF_SEL_MASK as MX93_GPR_ENET_QOS_INTF_MODE_MASK
is not a register field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnaGl-00000007i9f-0ZMw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP v6 spends a good amount of time rebuilding a fresh fl6 at each
transmit in inet6_csk_xmit()/inet6_csk_route_socket().
TCP v4 caches the information in inet->cork.fl.u.ip4 instead.
This patch is a first step converting IPv6 to the same strategy:
Before this patch inet6_sk_rebuild_header() only validated/rebuilt
a dst. Automatic variable @fl6 content was lost.
After this patch inet6_sk_rebuild_header() also initializes
inet->cork.fl.u.ip6, which can be reused in the future.
This makes inet6_sk_rebuild_header() very similar to
inet_sk_rebuild_header().
Also remove the EXPORT_SYMBOL_GPL(), inet6_sk_rebuild_header()
is not called from any module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260204163035.4123817-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'tcp-remove-net-core-request_sock-c-and-no-longer-inline-__reqsk_free'
Eric Dumazet says:
====================
tcp: remove net/core/request_sock.c and no longer inline __reqsk_free()
After DCCP removal, net/core/request_sock.c makes no more sense.
Move reqsk_queue_alloc() and reqsk_fastopen_remove() to TCP files.
Then put __reqsk_free() out of line to save ~2 Kbytes of text.
====================
Link: https://patch.msgid.link/20260204055147.1682705-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Inlining __reqsk_free() is overkill, let's reclaim 2 Kbytes of text.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 2/4 grow/shrink: 2/14 up/down: 225/-2338 (-2113)
Function old new delta
__reqsk_free - 114 +114
sock_edemux 18 82 +64
inet_csk_listen_start 233 264 +31
__pfx___reqsk_free - 16 +16
__pfx_reqsk_queue_alloc 16 - -16
__pfx_reqsk_free 16 - -16
reqsk_queue_alloc 46 - -46
tcp_req_err 272 177 -95
reqsk_fastopen_remove 348 253 -95
cookie_bpf_check 157 62 -95
cookie_tcp_reqsk_alloc 387 290 -97
cookie_v4_check 1568 1465 -103
reqsk_free 105 - -105
cookie_v6_check 1519 1412 -107
sock_gen_put 187 78 -109
sock_pfree 212 82 -130
tcp_try_fastopen 1818 1683 -135
tcp_v4_rcv 3478 3294 -184
reqsk_put 306 90 -216
tcp_get_cookie_sock 551 318 -233
tcp_v6_rcv 3404 3141 -263
tcp_conn_request 2677 2384 -293
Total: Before=24887415, After=24885302, chg -0.01%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After DCCP removal, this file was not needed any more.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function belongs to TCP stack, not to net/core/request_sock.c
We get rid of the now empty request_sock.c n the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only called once from inet_csk_listen_start(), it can be static.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260204055147.1682705-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
