| Age | Commit message (Collapse) | Author |
|---|
|
commit f3a296405b6e ("PCI: dwc: Strengthen the MSI address allocation
logic") strengthened the iMSI-RX target address allocation logic to handle
64-bit addresses for platforms without 32-bit DMA addresses. However, it
still left 32-bit MSI capable endpoints (EPs) non-functional on such
platforms.
Per DWC databook r6.21a, sec 3.10.2.3, it states:
"The iMSI-RX is programmed with an address (MSI_CTRL_ADDR_OFF and
MSI_CTRL_UPPER_ADDR_OFF) that is used as the system MSI address. When an
inbound MWr request is passed to the AXI bridge and matches this address
as well as the conditions specified for an MSI memory write request, an
MSI interrupt is detected. When this MWr is about to be driven onto the
AXI bridge master interface1, it is dropped and never appears on the AXI
bus."
Since iMSI-RX MSI_CTRL_ADDR doesn't require actual system memory mapping,
any 32-bit address that won't be used for BAR memory allocations can be
assigned. So assign cfg0_base to the iMSI-RX target address as the first
option if it's a 32-bit address, which satisfies this requirement.
Otherwise, fallback to the existing coherent allocation.
cc: Ajay Agarwal <ajayagarwal@google.com>
cc: Will McVicker <willmcvicker@google.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: trimmed the description to exclude testbed info and used imperative tone]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1766540332-24235-1-git-send-email-shawn.lin@rock-chips.com
|
|
For ternary operators in the form of a ? true : false, if a itself returns
a boolean result, the ternary operator can be omitted. Remove redundant
ternary operators to clean up the code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
For easy grepping on debug purposes join string literals back in
the messages.
No functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Use readl_poll_timeout_atomic() from <iopoll.h> instead of using
custom poll loops.
The timeout settings are different, but that shouldn't be much of a
problem. Instead of polling 10 times in a close loop, it polls for
one millisecond.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Update header inclusions to follow IWYU (Include What You Use) principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The general recommendation is to not use of_match_ptr(). Drop it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The hp_populate_*_elements_from_package() functions in the hp-bioscfg
driver contain out-of-bounds array access vulnerabilities.
These functions parse ACPI packages into internal data structures using
a for loop with index variable 'elem' that iterates through
enum_obj/integer_obj/order_obj/password_obj/string_obj arrays.
When processing multi-element fields like PREREQUISITES and
ENUM_POSSIBLE_VALUES, these functions read multiple consecutive array
elements using expressions like 'enum_obj[elem + reqs]' and
'enum_obj[elem + pos_values]' within nested loops.
The bug is that the bounds check only validated elem, but did not consider
the additional offset when accessing elem + reqs or elem + pos_values.
The fix changes the bounds check to validate the actual accessed index.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: e6c7b3e15559 ("platform/x86: hp-bioscfg: string-attributes")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB788173D7DD4EA2CB6383683DAFB0A@SYBPR01MB7881.ausprd01.prod.outlook.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This patch modifies the ntfs3 driver by replacing the buffer_head-based
operations with the iomap ones.
Implementation details:
- Implements core iomap operations (ntfs_iomap_begin/end) for block mapping:
Proper handling of resident attributes via IOMAP_INLINE.
Support for sparse files through IOMAP_HOLE semantics.
Correct unwritten extent handling for zeroing operations.
- Replaces custom implementations with standardized iomap helpers:
Converts buffered reads to use iomap_read_folio and iomap_readahead.
Implements iomap_file_buffered_write for write operations.
Uses iomap_dio_rw for direct I/O paths.
Migrates zero range operations to iomap_zero_range.
- Preserves special handling paths for compressed files
- Implements proper EOF/valid data size management during writes
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr).
This is caused by a lock inversion deadlock involving the inode mutex
(ni_lock) and page locks.
Scenario:
1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock.
2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in
the compressed frame (including page Y).
3. Concurrently, Task B (e.g., via readahead) has locked page Y and
calls ntfs_read_folio().
4. Task B waits for ni_lock (held by A).
5. Task A waits for page Y lock (held by B).
-> DEADLOCK.
The fix is to restructure locking: do not take ni_lock in ntfs_read_folio().
Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required
page locks for the frame have been successfully acquired. This restores the
correct lock ordering (Page Lock -> ni_lock) consistent with VFS.
Reported-by: syzbot+5af33dd272b913b65880@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5af33dd272b913b65880
Fixes: f35590ee26f5 ("fs/ntfs3: remove ntfs_bio_pages and use page cache for compressed I/O")
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
[almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
The generic llseek implementation does not understand ntfs data runs,
sparse regions, or compression semantics, and therefore cannot correctly
locate data or holes in files.
Add a filesystem-specific llseek handler that scans attribute data runs
to find the next data or hole starting at the given offset. Handle
resident attributes, sparse runs, compressed holes, and the implicit hole
at end-of-file.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Handle ntfs_read_folio() early when the folio offset is beyond i_valid
by zero-filling the folio and marking it uptodate. This avoids needless
I/O and locking, improves read performance.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Do not keep preallocated clusters for sparsed and compressed files.
Preserving preallocation in these cases causes fsx failures when running
with sparse files and preallocation enabled.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Some xfstests expect fsync() on a file or directory to also persist
directory metadata up the parent chain. Using generic_file_fsync() is not
sufficient for ntfs, because parent directories are not explicitly
written out.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
KASAN reported a stack-out-of-bounds access in ima_appraise_measurement
from is_bprm_creds_for_exec:
BUG: KASAN: stack-out-of-bounds in ima_appraise_measurement+0x12dc/0x16a0
Read of size 1 at addr ffffc9000160f940 by task sudo/550
The buggy address belongs to stack of task sudo/550
and is located at offset 24 in frame:
ima_appraise_measurement+0x0/0x16a0
This frame has 2 objects:
[48, 56) 'file'
[80, 148) 'hash'
This is caused by using container_of on the *file pointer. This offset
calculation is what triggers the stack-out-of-bounds error.
In order to fix this, pass in a bprm_is_check boolean which can be set
depending on how process_measurement is called. If the caller has a
linux_binprm pointer and the function is BPRM_CHECK we can determine
is_check and set it then. Otherwise set it to false.
Fixes: 95b3cdafd7cb7 ("ima: instantiate the bprm_creds_for_exec() hook")
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
|
|
When probe succeeds we have other means to check if it was successful,
no need to pollute kernel log with the practically duplicated info.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The current probe function of the driver is implemented by using
plain old APIs. As Geert noted, one of the error paths has a mistake
that may lead to a wrong call. Instead of targeting that particular
issue, convert the driver to use device managed APIs altogether.
It's not needed per se (driver can never be removed once loaded),
but it simplifies coding and error handling.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdVquNEoxRQkcBEH0nC+CDuib6o0H6m3CBk3ZN2267LpQw@mail.gmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add audio XCVR sound card, which supports SPDIF TX & RX only,
eARC RX, ARC RX are not supported.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add bt-sco sound card, which is used by BT HFP case.
It supports wb profile as default.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix the SMARC_SDIO_WP gpio-line-name position. It should be on line 15
of som_gpio_expander_1, not line 17.
Fixes: 90bbe88e0ea6 ("arm64: dts: freescale: add Toradex SMARC iMX95")
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
interrupt
Change the PHY interrupt trigger type from IRQ_TYPE_LEVEL_LOW to
IRQ_TYPE_EDGE_FALLING to match the PCA9745 GPIO expander hardware
capabilities and avoid emulated level detection.
Fixes: 90bbe88e0ea6 ("arm64: dts: freescale: add Toradex SMARC iMX95")
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable PMICs used on i.MX53 Quick-Start Boards: DA9052 for i.MX53 QSB
and MC13XXX for i.MX53 QSRB (it has Freescale MC34708 PMIC).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The safety documentation incorrectly refers to `RawDeviceId` when
transmuting to `RawType`. This fixes the documentation to correctly
indicate that implementers must ensure layout compatibility with
`RawType`, not `RawDeviceId`.
Fixes: 9b90864bb42b ("rust: implement `IdArray`, `IdTable` and `RawDeviceId`")
Signed-off-by: Yilin Chen <1479826151@qq.com>
Link: https://patch.msgid.link/tencent_C18DD5047749311142ED455779C7CCCF3A08@qq.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add DT node for the SIM LPAV module.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add flexcan2 and flexcan4, and related phys support.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add 'thermal_zones' as a label to the thermal-zones node.
Without this label, it is not possible to add additional
trip points in board files. For example, to add an active
trip point for controlling a fan.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The FRDM-i.MX8MP is an NXP development platform based on the i.MX8M Plus
SoC, featuring a quad Cortex-A53, Cortex-M7 co-processor, 4GB LPDDR4,
32GB eMMC, Wi-Fi 6/Bluetooth 5.4/802.15.4 tri-radio, Ethernet, HDMI/MIPI
display interfaces, camera connectors, and standard expansion headers.
Based on the device tree found in the NXP repository at github
https://github.com/nxp-imx-support/meta-imx-frdm and on imx8mp-evk
board kernel mainline device tree.
This is a basic device tree supporting:
- Quad Cortex-A53
- 4GB LPDDR4 DRAM
- PCA9450C PMIC with regulators
- Two NXP PCAL6416 GPIO expanders
- RGB LEDs via GPIO expander
- I2C1, I2C2, I2C3 controllers
- UART2 (console) and UART3 (with RTS/CTS)
- USDHC3 (8-bit eMMC)
- SNVS power key (onboard power button)
Co-developed-by: Xiaofeng Wei <xiaofeng.wei@nxp.com>
Signed-off-by: Xiaofeng Wei <xiaofeng.wei@nxp.com>
Signed-off-by: Rogerio Pimentel <rpimentel.silva@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace the 0 with IMX_LPCG_CLK_0 for LPCG clock indices. Although the
numerical value is identical, the LPCG input is defined as
IMX_LPCG_CLK_<n>, so using the symbolic constant improves clarity and
consistency with the LPCG clock naming convention.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace the 0 with IMX_LPCG_CLK_0 for LPCG clock indices. Although the
numerical value is identical, the LPCG input is defined as
IMX_LPCG_CLK_<n>, so using the symbolic constant improves clarity and
consistency with the LPCG clock naming convention.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add sensors under i2c1 bus.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Replace the 0 with IMX_LPCG_CLK_0 for LPCG clock indices. Although the
numerical value is identical, the LPCG input is defined as
IMX_LPCG_CLK_<n>, so using the symbolic constant improves clarity and
consistency with the LPCG clock naming convention.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device tree compatible string for the i.MX8MP FRDM board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rogerio Pimentel <rpimentel.silva@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
It seems like, after the request_mem_region(), the corresponding
release_mem_region() must take the same size. This was done
in (now removed due to previous refactoring) charlcd_remove()
but not in the error path in charlcd_probe().
Fixes: ce8962455e90 ("ARM: 6214/2: driver for the character LCD found in ARM refdesigns")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add TDP data for laptop model G615LR.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20251225031041.2321249-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model FA608UM.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20251225030354.2315874-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model GA403WR.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20251225025301.1980627-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add TDP data for laptop model GU605CR.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20251225023841.1970513-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Now that i915/display macros have been substituted with wrappers that call
the new display-device helpers, we can drop the conflicting includes from
GVT and remove the temporary #ifdef/#undef macro overrides.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251219060302.2365123-7-ankit.k.nautiyal@intel.com
|
|
The macro `DPLL_ID_SKL_DPLL0` is defined in
display/intel_dpll_mgr.h. Previously, GVT included the header
display/intel_display_core.h` because other macros also depended on it.
After porting those macros to use the new APIs, the only remaining
dependency was for the DPLL macro.
Replace the indirect include with the correct header and drop
intel_display_core.h to reduce unnecessary dependencies.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251219060302.2365123-6-ankit.k.nautiyal@intel.com
|
|
Add a new API to check if a given pipe is valid using
DISPLAY_RUNTIME_INFO() for GVT.
Update GVT to use this API instead of accessing
`DISPLAY_RUNTIME_INFO->pipe_mask` directly in the `for_each_pipe` macro.
Since `for_each_pipe` is defined in i915/display/intel_display.h, which
also contains other macros used by gvt/display.c, we cannot drop the
intel_display.h header yet. This causes a build error because
`for_each_pipe` is included from both i915/display/intel_display.h and
gvt/display_helpers.h.
To resolve this, rename the GVT macro to `gvt_for_each_pipe` and make it
call the new API. This avoids exposing display internals and prepares for
display modularization.
v2:
- Expose API to check if pipe is valid rather than the runtime info
pipe mask. (Jani)
- Rename the macro to `gvt_for_each_pipe` to resolve build error.
v3:
- Use EXPORT_SYMBOL_NS_GPL(..., "I915_GVT"); (Jani)
- Use enum pipe at call sites instead of casting in the macro. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251219060302.2365123-5-ankit.k.nautiyal@intel.com
|
|
Introduce gvt/display_helpers.h to make DISPLAY_MMIO_BASE and
INTEL_DISPLAY_DEVICE_*_OFFSET macros call exported display functions.
This lets GVT keep using existing register macros (e.g.,
TRANSCONF(display, pipe)) while ensuring offset calculations happen
through functions instead of accessing display internals.
Ideally, we would remove the display headers that define these macros,
but some macros in GVT still depend on them and have not yet been
ported. Keeping those headers leads to build conflicts, so as a
stopgap, we use temporary ifdef/undef blocks to override the macros
with API-backed versions. These will be removed once all dependent
macros are ported and the conflicting headers can be safely dropped.
Note:
TRANSCONF() expects a pipe index but some GVT callers pass a transcoder,
causing -Werror=enum-conversion.
Fix: cast to enum pipe in the GVT-side macro override.
This works for all cases as TRANSCODER_{A,B,C,D} all have 1:1 mapping to
PIPE_{A,B,C,D} except for TRANSCODER_EDP which is used in one place.
In any case, the cast preserves the previous behaviour.
v2:
- Remove prefix `gvt/` while including the header file. (Jani)
- Explain the rationale behind temporary ifdef/undefs and plan to drop
them. (Jani).
v3:
- Meld the patch to cast argument to enum pipe for the pipe-offset
macro. (Jani)
- Add a FIXME to highlight the cast. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251219060302.2365123-4-ankit.k.nautiyal@intel.com
|
|
GVT code uses macros for register offsets that require display internal
structures. This makes clean separation of display code and
modularization difficult.
Introduce APIs to abstract offset calculations:
- intel_display_device_pipe_offset()
- intel_display_device_trans_offset()
- intel_display_device_cursor_offset()
- intel_display_device_mmio_base()
These APIs return absolute base offsets for the respective register
groups, allowing GVT to compute MMIO addresses without using internal
macros or struct fields. This prepares the path to separate
display-dependent code from i915/gvt/*.
v2:
- Build GVT APIs only when GVT is actually enabled. (Jani)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com> (#v1)
Link: https://patch.msgid.link/20251219060302.2365123-3-ankit.k.nautiyal@intel.com
|
|
As per Lenovo documentation, Fn+Print-Screen should "Open the Snipping
tool" which corresponds to KEY_SELECTIVE_SCREENSHOT (keycode 0x27a). It
is currently assigned to KEY_CUT because keycodes under 248 were
preferred due to X11 limitations.
Reassign Fn+Print-Screen from KEY_CUT to KEY_SELECTIVE_SCREENSHOT.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220566
Signed-off-by: Tomáš Hnyk <tomashnyk@gmail.com>
Link: https://patch.msgid.link/20251226203454.405520-1-tomashnyk@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Introduce INTEL_DISPLAY_DEVICE_*_OFFSET() macros to compute absolute
MMIO offsets for pipe, transcoder, and cursor registers.
Update _MMIO_PIPE2/_MMIO_TRANS2/_MMIO_CURSOR2 to use these macros
for cleaner abstraction and to prepare for external API usage (e.g. GVT).
Also move DISPLAY_MMIO_BASE() to intel_display_device.h so it can be
abstracted in GVT, allowing register macros to resolve via
exported helpers rather than peeking into struct intel_display.
v2: Wrap the macro argument usages in parenthesis. (Jani)
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251219060302.2365123-2-ankit.k.nautiyal@intel.com
|
|
Removes a safety requirement that incorrectly states callers must
ensure the device does not access memory while the returned slice
is live, as this method doesn't return a slice.
Fixes: d37a39f607c4 ("rust: dma: add as_slice/write functions for CoherentAllocation")
Signed-off-by: Yilin Chen <1479826151@qq.com>
Link: https://patch.msgid.link/tencent_5195C0324923A2B67DEF8AE4B8E139BCB105@qq.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The sample values for `family` and `machine` were swapped relative to
what the driver actually does, and doesn't match the field description.
Fixes: da5a70f3519f ("Documentation: add information for new sysfs soc bus functionality")
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Link: https://patch.msgid.link/20251226-soc-bindings-v4-2-2c2fac08f820@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
DSP currently supports 32-bit IOVA (32-bit PA + 4-bit SID) for
both Q6 and user DMA (uDMA) access. This is being upgraded to
34-bit PA + 4-bit SID due to a hardware revision in CDSP for
Kaanapali SoC, which expands the DMA addressable range.
Update DMA bits configuration in the driver to support CDSP on
Kaanapali SoC. Set the default `dma_bits` to 32-bit and update
it to 34-bit based on CDSP and OF matching on the fastrpc node.
Signed-off-by: Kumari Pallavi <kumari.pallavi@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251226070534.602021-5-kumari.pallavi@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement the new IOVA formatting required by the DSP architecture change
on Kaanapali SoC. Place the SID for DSP DMA transactions at bit 56 in the
physical address. This placement is necessary for the DSPs to correctly
identify streams and operate as intended.
To address this, set SID position to bit 56 via OF matching on the fastrpc
node; otherwise, default to legacy 32-bit placement.
This change ensures consistent SID placement across DSPs.
Signed-off-by: Kumari Pallavi <kumari.pallavi@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251226070534.602021-4-kumari.pallavi@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fields buf->phys and map->phys currently store DMA addresses
returned by dma_map_*() APIs, not physical addresses. This naming
is misleading and may lead to incorrect assumptions about the
address type and its translation.
Rename these fields from phys to dma_addr to improve code clarity
and align with kernel conventions for dma_addr_t usage.
Signed-off-by: Kumari Pallavi <kumari.pallavi@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251226070534.602021-3-kumari.pallavi@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
