diff options
Diffstat (limited to 'drivers/misc/eeprom/at25.c')
| -rw-r--r-- | drivers/misc/eeprom/at25.c | 86 |
1 files changed, 59 insertions, 27 deletions
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index 883dfd0ed658..bc2cfb75d9bb 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -34,6 +34,7 @@ */ #define FM25_SN_LEN 8 /* serial number length */ +#define FM25_MAX_ID_LEN 9 /* ID length */ #define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */ struct at25_data { @@ -44,6 +45,8 @@ struct at25_data { struct nvmem_config nvmem_config; struct nvmem_device *nvmem; u8 sernum[FM25_SN_LEN]; + u8 id[FM25_MAX_ID_LEN]; + u8 id_len; }; #define AT25_WREN 0x06 /* latch the write enable */ @@ -64,8 +67,6 @@ struct at25_data { #define AT25_INSTR_BIT3 0x08 /* additional address bit in instr */ -#define FM25_ID_LEN 9 /* ID length */ - /* * Specs often allow 5ms for a page write, sometimes 20ms; * it's important to recover from write timeouts. @@ -180,11 +181,25 @@ static ssize_t sernum_show(struct device *dev, struct device_attribute *attr, ch } static DEVICE_ATTR_RO(sernum); -static struct attribute *sernum_attrs[] = { +static ssize_t jedec_id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct at25_data *at25; + + at25 = dev_get_drvdata(dev); + + if (!at25->id_len) + return -EOPNOTSUPP; + + return sysfs_emit(buf, "%*phN\n", at25->id_len, at25->id); +} +static DEVICE_ATTR_RO(jedec_id); + +static struct attribute *at25_attrs[] = { &dev_attr_sernum.attr, + &dev_attr_jedec_id.attr, NULL, }; -ATTRIBUTE_GROUPS(sernum); +ATTRIBUTE_GROUPS(at25); /* * Poll Read Status Register with timeout @@ -378,7 +393,7 @@ static int at25_fram_to_chip(struct device *dev, struct spi_eeprom *chip) { struct at25_data *at25 = container_of(chip, struct at25_data, chip); u8 sernum[FM25_SN_LEN]; - u8 id[FM25_ID_LEN]; + u8 id[FM25_MAX_ID_LEN]; u32 val; int i; @@ -388,7 +403,12 @@ static int at25_fram_to_chip(struct device *dev, struct spi_eeprom *chip) chip->byte_len = val; } else { /* Get ID of chip */ - fm25_aux_read(at25, id, FM25_RDID, FM25_ID_LEN); + fm25_aux_read(at25, id, FM25_RDID, FM25_MAX_ID_LEN); + + /* Store the unprocessed ID for exposing via sysfs */ + memcpy(at25->id, id, FM25_MAX_ID_LEN); + at25->id_len = FM25_MAX_ID_LEN; + /* There are inside-out FRAM variations, detect them and reverse the ID bytes */ if (id[6] == 0x7f && id[2] == 0xc2) for (i = 0; i < ARRAY_SIZE(id) / 2; i++) { @@ -398,30 +418,42 @@ static int at25_fram_to_chip(struct device *dev, struct spi_eeprom *chip) id[i] = id[j]; id[j] = tmp; } - if (id[6] != 0xc2) { - dev_err(dev, "Error: no Cypress FRAM with device ID (manufacturer ID bank 7: %02x)\n", id[6]); - return -ENODEV; - } - switch (id[7]) { - case 0x21 ... 0x26: - chip->byte_len = BIT(id[7] - 0x21 + 4) * 1024; - break; - case 0x2a ... 0x30: - /* CY15B102QN ... CY15B116QN */ - chip->byte_len = BIT(((id[7] >> 1) & 0xf) + 13); - break; - default: - dev_err(dev, "Error: unsupported size (id %02x)\n", id[7]); + if (id[6] == 0xc2) { + at25->id_len = 9; + switch (id[7]) { + case 0x21 ... 0x26: + chip->byte_len = BIT(id[7] - 0x21 + 4) * 1024; + break; + case 0x2a ... 0x30: + /* CY15B102QN ... CY15B116QN */ + chip->byte_len = BIT(((id[7] >> 1) & 0xf) + 13); + break; + default: + dev_err(dev, "Error: unsupported size (id %02x)\n", id[7]); + return -ENODEV; + } + } else if (id[2] == 0x82 && id[3] == 0x06) { + at25->id_len = 8; + switch (id[1]) { + case 0x51 ... 0x54: + /* CY15B102QSN ... CY15B204QSN */ + chip->byte_len = BIT(((id[0] >> 3) & 0x1F) + 9); + break; + default: + dev_err(dev, "Error: unsupported product id %02x\n", id[1]); + return -ENODEV; + } + } else { + dev_err(dev, "Error: unrecognized JEDEC ID format: %*ph\n", + FM25_MAX_ID_LEN, id); return -ENODEV; } - if (id[8]) { - fm25_aux_read(at25, sernum, FM25_RDSN, FM25_SN_LEN); - /* Swap byte order */ - for (i = 0; i < FM25_SN_LEN; i++) - at25->sernum[i] = sernum[FM25_SN_LEN - 1 - i]; - } + fm25_aux_read(at25, sernum, FM25_RDSN, FM25_SN_LEN); + /* Swap byte order */ + for (i = 0; i < FM25_SN_LEN; i++) + at25->sernum[i] = sernum[FM25_SN_LEN - 1 - i]; } if (chip->byte_len > 64 * 1024) @@ -539,7 +571,7 @@ static struct spi_mem_driver at25_driver = { .driver = { .name = "at25", .of_match_table = at25_of_match, - .dev_groups = sernum_groups, + .dev_groups = at25_groups, }, .id_table = at25_spi_ids, }, |