diff options
Diffstat (limited to 'drivers/cxl/cxlpci.h')
| -rw-r--r-- | drivers/cxl/cxlpci.h | 75 |
1 files changed, 22 insertions, 53 deletions
diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h index 1d526bea8431..0cf64218aa16 100644 --- a/drivers/cxl/cxlpci.h +++ b/drivers/cxl/cxlpci.h @@ -8,59 +8,6 @@ #define CXL_MEMORY_PROGIF 0x10 /* - * See section 8.1 Configuration Space Registers in the CXL 2.0 - * Specification. Names are taken straight from the specification with "CXL" and - * "DVSEC" redundancies removed. When obvious, abbreviations may be used. - */ -#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20) - -/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */ -#define CXL_DVSEC_PCIE_DEVICE 0 -#define CXL_DVSEC_CAP_OFFSET 0xA -#define CXL_DVSEC_MEM_CAPABLE BIT(2) -#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4) -#define CXL_DVSEC_CTRL_OFFSET 0xC -#define CXL_DVSEC_MEM_ENABLE BIT(2) -#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10)) -#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10)) -#define CXL_DVSEC_MEM_INFO_VALID BIT(0) -#define CXL_DVSEC_MEM_ACTIVE BIT(1) -#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28) -#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10)) -#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + (i * 0x10)) -#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28) - -#define CXL_DVSEC_RANGE_MAX 2 - -/* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */ -#define CXL_DVSEC_FUNCTION_MAP 2 - -/* CXL 2.0 8.1.5: CXL 2.0 Extensions DVSEC for Ports */ -#define CXL_DVSEC_PORT_EXTENSIONS 3 - -/* CXL 2.0 8.1.6: GPF DVSEC for CXL Port */ -#define CXL_DVSEC_PORT_GPF 4 -#define CXL_DVSEC_PORT_GPF_PHASE_1_CONTROL_OFFSET 0x0C -#define CXL_DVSEC_PORT_GPF_PHASE_1_TMO_BASE_MASK GENMASK(3, 0) -#define CXL_DVSEC_PORT_GPF_PHASE_1_TMO_SCALE_MASK GENMASK(11, 8) -#define CXL_DVSEC_PORT_GPF_PHASE_2_CONTROL_OFFSET 0xE -#define CXL_DVSEC_PORT_GPF_PHASE_2_TMO_BASE_MASK GENMASK(3, 0) -#define CXL_DVSEC_PORT_GPF_PHASE_2_TMO_SCALE_MASK GENMASK(11, 8) - -/* CXL 2.0 8.1.7: GPF DVSEC for CXL Device */ -#define CXL_DVSEC_DEVICE_GPF 5 - -/* CXL 2.0 8.1.8: PCIe DVSEC for Flex Bus Port */ -#define CXL_DVSEC_PCIE_FLEXBUS_PORT 7 - -/* CXL 2.0 8.1.9: Register Locator DVSEC */ -#define CXL_DVSEC_REG_LOCATOR 8 -#define CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET 0xC -#define CXL_DVSEC_REG_LOCATOR_BIR_MASK GENMASK(2, 0) -#define CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8) -#define CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16) - -/* * NOTE: Currently all the functions which are enabled for CXL require their * vectors to be in the first 16. Use this as the default max. */ @@ -129,7 +76,29 @@ static inline bool cxl_pci_flit_256(struct pci_dev *pdev) struct cxl_dev_state; void read_cdat_data(struct cxl_port *port); + +#ifdef CONFIG_CXL_RAS void cxl_cor_error_detected(struct pci_dev *pdev); pci_ers_result_t cxl_error_detected(struct pci_dev *pdev, pci_channel_state_t state); +void devm_cxl_dport_rch_ras_setup(struct cxl_dport *dport); +void devm_cxl_port_ras_setup(struct cxl_port *port); +#else +static inline void cxl_cor_error_detected(struct pci_dev *pdev) { } + +static inline pci_ers_result_t cxl_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + return PCI_ERS_RESULT_NONE; +} + +static inline void devm_cxl_dport_rch_ras_setup(struct cxl_dport *dport) +{ +} + +static inline void devm_cxl_port_ras_setup(struct cxl_port *port) +{ +} +#endif + #endif /* __CXL_PCI_H__ */ |