diff options
Diffstat (limited to 'arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 148 |
1 files changed, 132 insertions, 16 deletions
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 857fa427e195..05139bcb3184 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -30,6 +30,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include <dt-bindings/clock/bcm-sr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -159,7 +160,46 @@ reg = <0 0x60401000 0 0x38c>; }; - scr { + osc: clock-50000000 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + crmu_ref25m: hsls_25m_clk: clock-25000000 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&osc>; + clock-div = <2>; + clock-mult = <1>; + }; + + hsls_div2_clk: hsls_div2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>; + clock-div = <2>; + clock-mult = <1>; + + }; + + hsls_div4_clk: hsls_div4_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>; + clock-div = <4>; + clock-mult = <1>; + }; + + hsls_25m_div2_clk: clock-12500000 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&hsls_25m_clk>; + clock-div = <2>; + clock-mult = <1>; + }; + + scr-bus@61000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -263,14 +303,12 @@ }; }; - crmu: crmu { + crmu: crmu-bus@66400000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x66400000 0x100000>; - #include "stingray-clock.dtsi" - otp: otp@1c400 { compatible = "brcm,ocotp-v2"; reg = <0x0001c400 0x68>; @@ -283,6 +321,84 @@ reg = <0x0001d000 0x400>; }; + lcpll0: clock-controller@1d0c4 { + #clock-cells = <1>; + compatible = "brcm,sr-lcpll0"; + reg = <0x0001d0c4 0x3c>, + <0x0001c870 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll0", "clk_sata_refp", + "clk_sata_refn", "clk_sata_350", + "clk_sata_500"; + }; + + genpll0: clock-controller@1d104 { + #clock-cells = <1>; + compatible = "brcm,sr-genpll0"; + reg = <0x0001d104 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll0", "clk_125m", "clk_scr", + "clk_250", "clk_pcie_axi", + "clk_paxc_axi_x2", + "clk_paxc_axi"; + }; + + lcpll1: clock-controller@1d138 { + #clock-cells = <1>; + compatible = "brcm,sr-lcpll1"; + reg = <0x0001d138 0x3c>, + <0x0001c870 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll1", "clk_wan", + "clk_usb_ref", + "clk_crmu_ts"; + }; + + genpll2: clock-controller@1d1ac { + #clock-cells = <1>; + compatible = "brcm,sr-genpll2"; + reg = <0x0001d1ac 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll2", "clk_nic", + "clk_ts_500_ref", "clk_125_nitro", + "clk_chimp", "clk_nic_flash", + "clk_fs"; + }; + + genpll3: clock-controller@1d1e0 { + #clock-cells = <1>; + compatible = "brcm,sr-genpll3"; + reg = <0x0001d1e0 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll3", "clk_hsls", + "clk_sdio"; + }; + + genpll4: clock-controller@1d214 { + #clock-cells = <1>; + compatible = "brcm,sr-genpll4"; + reg = <0x0001d214 0x32>, + <0x0001c854 0x4>; + clocks = <&osc>; + clock-output-names = "genpll4", "clk_ccn", + "clk_tpiu_pll", "clk_noc", + "clk_chclk_fs4", + "clk_bridge_fscpu"; + }; + + genpll5: clock-controller@1d248 { + #clock-cells = <1>; + compatible = "brcm,sr-genpll5"; + reg = <0x0001d248 0x32>, + <0x0001c870 0x4>; + clocks = <&osc>; + clock-output-names = "genpll5", "clk_fs4_hf", + "clk_crypto_ae", "clk_raid_ae"; + }; + gpio_crmu: gpio@24800 { compatible = "brcm,iproc-gpio"; reg = <0x00024800 0x4c>; @@ -296,7 +412,7 @@ #include "stingray-pcie.dtsi" #include "stingray-usb.dtsi" - hsls { + hsls-bus@68900000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -575,7 +691,7 @@ status = "disabled"; }; - nand: nand@360000 { + nand: nand-controller@360000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x00360000 0x600>, <0x0050a408 0x600>, @@ -588,28 +704,28 @@ status = "disabled"; }; - sdio0: sdhci@3f1000 { + sdio0: mmc@3f1000 { compatible = "brcm,sdhci-iproc"; reg = <0x003f1000 0x100>; interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; bus-width = <8>; - clocks = <&sdio0_clk>; + clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>; iommus = <&smmu 0x6002 0x0000>; status = "disabled"; }; - sdio1: sdhci@3f2000 { + sdio1: mmc@3f2000 { compatible = "brcm,sdhci-iproc"; reg = <0x003f2000 0x100>; interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; bus-width = <8>; - clocks = <&sdio1_clk>; + clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>; iommus = <&smmu 0x6003 0x0000>; status = "disabled"; }; }; - tmons { + tmons-bus@8f100000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -698,18 +814,18 @@ }; }; - nic-hsls { + nic-hsls-bus@60800000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x7fffffff>; + ranges = <0x0 0x0 0x60800000 0x6fffff>; - nic_i2c0: i2c@60826100 { + nic_i2c0: i2c@26100 { compatible = "brcm,iproc-nic-i2c"; #address-cells = <1>; #size-cells = <0>; - reg = <0x60826100 0x100>, - <0x60e00408 0x1000>; + reg = <0x026100 0x100>, + <0x600408 0x1000>; brcm,ape-hsls-addr-mask = <0x03400000>; clock-frequency = <100000>; status = "disabled"; |