diff options
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 51 |
1 files changed, 38 insertions, 13 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts index 1e5c6f984945..50565851f3d8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts @@ -183,7 +183,6 @@ assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; assigned-clock-rates = <294912000>, <270950400>, <393216000>; @@ -257,38 +256,26 @@ &cpu0 { cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; }; &cpu1 { cpu-supply = <&vddcpu_b>; - operating-points-v2 = <&cpu_opp_table_0>; - clocks = <&clkc CLKID_CPU_CLK>; }; &cpu100 { cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; }; &cpu101 { cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; }; &cpu102 { cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; }; &cpu103 { cpu-supply = <&vddcpu_a>; - operating-points-v2 = <&cpub_opp_table_1>; - clocks = <&clkc CLKID_CPUB_CLK>; }; &cpu_thermal { @@ -364,12 +351,46 @@ }; }; +/* Also exposed on the 40-pin header: SDA pin 3, SCL pin 5 */ +&i2c3 { + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + pinctrl-0 = <&fusb302_irq_pins>; + pinctrl-names = "default"; + interrupt-parent = <&gpio_intc>; + interrupts = <74 IRQ_TYPE_LEVEL_LOW>; + + vbus-supply = <&ao_5v>; + + connector { + compatible = "usb-c-connector"; + }; + }; +}; + &ir { status = "disabled"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; }; +&periphs_pinctrl { + fusb302_irq_pins: fusb302-irq { + mux { + groups = "GPIOA_13"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + &pwm_ab { pinctrl-0 = <&pwm_a_e_pins>; pinctrl-names = "default"; @@ -394,6 +415,10 @@ status = "okay"; }; +&npu { + status = "okay"; +}; + &saradc { status = "okay"; vref-supply = <&vddao_1v8>; |