diff options
Diffstat (limited to 'arch/arm/boot/dts/renesas/r9a06g032.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/renesas/r9a06g032.dtsi | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi index 8debb77803bb..f4f760aff28b 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi @@ -453,6 +453,12 @@ <&sysctrl R9A06G032_CLK_SWITCH>; clock-names = "hclk", "clk"; power-domains = <&sysctrl>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dlr", "switch", "prp", "hub", "ptrn"; status = "disabled"; ethernet-ports { @@ -509,6 +515,165 @@ <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; + /* + * The GPIO mapping to the corresponding pins is not obvious. + * See the hardware documentation for details. + */ + gpio0: gpio@5000b000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000b000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&sysctrl R9A06G032_HCLK_GPIO0>; + clock-names = "bus"; + + /* GPIO0a[0] connected to pin GPIO0 */ + /* GPIO0a[1..2] connected to pins GPIO3..4 */ + /* GPIO0a[3..4] connected to pins GPIO9..10 */ + /* GPIO0a[5] connected to pin GPIO12 */ + /* GPIO0a[6..7] connected to pins GPIO15..16 */ + /* GPIO0a[8..9] connected to pins GPIO21..22 */ + /* GPIO0a[10] connected to pin GPIO24 */ + /* GPIO0a[11..12] connected to pins GPIO27..28 */ + /* GPIO0a[13..14] connected to pins GPIO33..34 */ + /* GPIO0a[15] connected to pin GPIO36 */ + /* GPIO0a[16..17] connected to pins GPIO39..40 */ + /* GPIO0a[18..19] connected to pins GPIO45..46 */ + /* GPIO0a[20] connected to pin GPIO48 */ + /* GPIO0a[21..22] connected to pins GPIO51..52 */ + /* GPIO0a[23..24] connected to pins GPIO57..58 */ + /* GPIO0a[25..31] connected to pins GPIO62..68 */ + gpio0a: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + + interrupt-controller; + interrupt-parent = <&gpioirqmux>; + interrupts = < 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31>; + #interrupt-cells = <2>; + }; + + /* GPIO0b[0..1] connected to pins GPIO1..2 */ + /* GPIO0b[2..5] connected to pins GPIO5..8 */ + /* GPIO0b[6] connected to pin GPIO11 */ + /* GPIO0b[7..8] connected to pins GPIO13..14 */ + /* GPIO0b[9..12] connected to pins GPIO17..20 */ + /* GPIO0b[13] connected to pin GPIO23 */ + /* GPIO0b[14..15] connected to pins GPIO25..26 */ + /* GPIO0b[16..19] connected to pins GPIO29..32 */ + /* GPIO0b[20] connected to pin GPIO35 */ + /* GPIO0b[21..22] connected to pins GPIO37..38 */ + /* GPIO0b[23..26] connected to pins GPIO41..44 */ + /* GPIO0b[27] connected to pin GPIO47 */ + /* GPIO0b[28..29] connected to pins GPIO49..50 */ + /* GPIO0b[30..31] connected to pins GPIO53..54 */ + gpio0b: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + }; + }; + + gpio1: gpio@5000c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000c000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&sysctrl R9A06G032_HCLK_GPIO1>; + clock-names = "bus"; + + /* GPIO1a[0..4] connected to pins GPIO69..73 */ + /* GPIO1a[5..31] connected to pins GPIO95..121 */ + gpio1a: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + + interrupt-controller; + interrupt-parent = <&gpioirqmux>; + interrupts = <32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63>; + #interrupt-cells = <2>; + }; + + /* GPIO1b[0..1] connected to pins GPIO55..56 */ + /* GPIO1b[2..4] connected to pins GPIO59..61 */ + /* GPIO1b[5..25] connected to pins GPIO74..94 */ + /* GPIO1b[26..31] connected to pins GPIO150..155 */ + gpio1b: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + }; + }; + + gpio2: gpio@5000d000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000d000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&sysctrl R9A06G032_HCLK_GPIO2>; + clock-names = "bus"; + + /* GPIO2a[0..27] connected to pins GPIO122..149 */ + /* GPIO2a[28..31] connected to pins GPIO156..159 */ + gpio2a: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + + interrupt-controller; + interrupt-parent = <&gpioirqmux>; + interrupts = <64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95>; + #interrupt-cells = <2>; + }; + + /* GPIO2b[0..9] connected to pins GPIO160..169 */ + gpio2b: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + reg = <1>; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <10>; + }; + }; + + gpioirqmux: interrupt-controller@51000480 { + compatible = "renesas,r9a06g032-gpioirqmux", "renesas,rzn1-gpioirqmux"; + reg = <0x51000480 0x20>; + #interrupt-cells = <1>; + #address-cells = <0>; + interrupt-map-mask = <0x7f>; + + /* + * Example mapping entry. Board DTs need to overwrite + * 'interrupt-map' with their specific mapping. Check + * the irqmux binding documentation for details. + */ + interrupt-map = <0 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + can0: can@52104000 { compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000"; reg = <0x52104000 0x800>; |