1 files changed, 131 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-qcs404.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-qcs404.yaml
new file mode 100644
index 000000000000..99b3ed43b87c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-qcs404.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-qcs404.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <mani@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-qcs404
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: elbi
+      - const: parf
+      - const: config
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: iface # AHB clock
+      - const: aux
+      - const: master_bus # AXI Master clock
+      - const: slave_bus # AXI Slave clock
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: msi
+
+  resets:
+    maxItems: 6
+
+  reset-names:
+    items:
+      - const: axi_m # AXI Master reset
+      - const: axi_s # AXI Slave reset
+      - const: axi_m_sticky # AXI Master Sticky reset
+      - const: pipe_sticky
+      - const: pwr
+      - const: ahb
+
+required:
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie@10000000 {
+        compatible = "qcom,pcie-qcs404";
+        reg = <0x10000000 0xf1d>,
+              <0x10000f20 0xa8>,
+              <0x07780000 0x2000>,
+              <0x10001000 0x2000>;
+        reg-names = "dbi", "elbi", "parf", "config";
+        ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */
+                 <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */
+
+        device_type = "pci";
+        linux,pci-domain = <0>;
+        bus-range = <0x00 0xff>;
+        num-lanes = <1>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_0_AUX_CLK>,
+                 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+        clock-names = "iface", "aux", "master_bus", "slave_bus";
+
+        interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0x7>;
+        interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                        <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                        <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                        <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+        phys = <&pcie_phy>;
+        phy-names = "pciephy";
+
+        perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+        resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
+                 <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
+                 <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
+                 <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
+                 <&gcc GCC_PCIE_0_BCR>,
+                 <&gcc GCC_PCIE_0_AHB_ARES>;
+        reset-names = "axi_m",
+                      "axi_s",
+                      "axi_m_sticky",
+                      "pipe_sticky",
+                      "pwr",
+                      "ahb";
+
+        pcie@0 {
+            device_type = "pci";
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            bus-range = <0x01 0xff>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+        };
+    };