diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml | 259 |
1 files changed, 0 insertions, 259 deletions
diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml deleted file mode 100644 index 6353a336f382..000000000000 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ /dev/null @@ -1,259 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Bluetooth Chips - -maintainers: - - Balakrishna Godavarthi <quic_bgodavar@quicinc.com> - - Rocky Liao <quic_rjliao@quicinc.com> - -description: - This binding describes Qualcomm UART-attached bluetooth chips. - -properties: - compatible: - enum: - - qcom,qca2066-bt - - qcom,qca6174-bt - - qcom,qca9377-bt - - qcom,wcn3950-bt - - qcom,wcn3988-bt - - qcom,wcn3990-bt - - qcom,wcn3991-bt - - qcom,wcn3998-bt - - qcom,qca6390-bt - - qcom,wcn6750-bt - - qcom,wcn6855-bt - - qcom,wcn7850-bt - - enable-gpios: - maxItems: 1 - description: gpio specifier used to enable chip - - swctrl-gpios: - maxItems: 1 - description: gpio specifier is used to find status - of clock supply to SoC - - clocks: - maxItems: 1 - description: clock provided to the controller (SUSCLK_32KHZ) - - vddio-supply: - description: VDD_IO supply regulator handle - - vddxo-supply: - description: VDD_XO supply regulator handle - - vddrf-supply: - description: VDD_RF supply regulator handle - - vddch0-supply: - description: VDD_CH0 supply regulator handle - - vddch1-supply: - description: VDD_CH1 supply regulator handle - - vddaon-supply: - description: VDD_AON supply regulator handle - - vdddig-supply: - description: VDD_DIG supply regulator handle - - vddbtcmx-supply: - description: VDD_BT_CMX supply regulator handle - - vddbtcxmx-supply: - description: VDD_BT_CXMX supply regulator handle - - vddrfacmn-supply: - description: VDD_RFA_CMN supply regulator handle - - vddrfa0p8-supply: - description: VDD_RFA_0P8 supply regulator handle - - vddrfa1p7-supply: - description: VDD_RFA_1P7 supply regulator handle - - vddrfa1p8-supply: - description: VDD_RFA_1P8 supply regulator handle - - vddrfa1p2-supply: - description: VDD_RFA_1P2 supply regulator handle - - vddrfa1p9-supply: - description: VDD_RFA_1P9 supply regulator handle - - vddrfa2p2-supply: - description: VDD_RFA_2P2 supply regulator handle - - vddasd-supply: - description: VDD_ASD supply regulator handle - - vddwlcx-supply: - description: VDD_WLCX supply regulator handle - - vddwlmx-supply: - description: VDD_WLMX supply regulator handle - - max-speed: true - - firmware-name: - minItems: 1 - items: - - description: specify the name of nvm firmware to load - - description: specify the name of rampatch firmware to load - - local-bd-address: true - - qcom,local-bd-address-broken: - type: boolean - description: - boot firmware is incorrectly passing the address in big-endian order - -required: - - compatible - -additionalProperties: false - -allOf: - - $ref: bluetooth-controller.yaml# - - $ref: /schemas/serial/serial-peripheral-props.yaml# - - if: - properties: - compatible: - contains: - enum: - - qcom,qca2066-bt - - qcom,qca6174-bt - then: - required: - - enable-gpios - - clocks - - - if: - properties: - compatible: - contains: - enum: - - qcom,wcn3950-bt - - qcom,wcn3988-bt - - qcom,wcn3990-bt - - qcom,wcn3991-bt - - qcom,wcn3998-bt - then: - required: - - vddio-supply - - vddxo-supply - - vddrf-supply - - vddch0-supply - - - if: - properties: - compatible: - contains: - enum: - - qcom,wcn6750-bt - then: - required: - - vddaon-supply - - vddrfacmn-supply - - vddrfa0p8-supply - - vddrfa1p7-supply - - vddrfa1p2-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,wcn6855-bt - then: - required: - - vddrfacmn-supply - - vddaon-supply - - vddwlcx-supply - - vddwlmx-supply - - vddbtcmx-supply - - vddrfa0p8-supply - - vddrfa1p2-supply - - vddrfa1p8-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,wcn7850-bt - then: - required: - - vddrfacmn-supply - - vddaon-supply - - vddwlcx-supply - - vddwlmx-supply - - vddrfa0p8-supply - - vddrfa1p2-supply - - vddrfa1p8-supply - - if: - properties: - compatible: - contains: - enum: - - qcom,qca6390-bt - then: - required: - - vddrfacmn-supply - - vddaon-supply - - vddbtcmx-supply - - vddrfa0p8-supply - - vddrfa1p2-supply - - vddrfa1p7-supply - -examples: - - | - #include <dt-bindings/gpio/gpio.h> - serial { - - bluetooth { - compatible = "qcom,qca6174-bt"; - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; - clocks = <&divclk4>; - firmware-name = "nvm_00440302.bin"; - }; - }; - - | - serial { - - bluetooth { - compatible = "qcom,wcn3990-bt"; - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - firmware-name = "crnv21.bin"; - }; - }; - - | - serial { - - bluetooth { - compatible = "qcom,wcn6750-bt"; - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_default>; - enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; - swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; - vddio-supply = <&vreg_l19b_1p8>; - vddaon-supply = <&vreg_s7b_0p9>; - vddbtcxmx-supply = <&vreg_s7b_0p9>; - vddrfacmn-supply = <&vreg_s7b_0p9>; - vddrfa0p8-supply = <&vreg_s7b_0p9>; - vddrfa1p7-supply = <&vreg_s1b_1p8>; - vddrfa1p2-supply = <&vreg_s8b_1p2>; - vddrfa2p2-supply = <&vreg_s1c_2p2>; - vddasd-supply = <&vreg_l11c_2p8>; - max-speed = <3200000>; - firmware-name = "msnv11.bin"; - }; - }; |