1 files changed, 0 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
deleted file mode 100644
index c2175d3c82ec..000000000000
--- a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Broadcom TRX Container Partition
-================================
-
-TRX is Broadcom's official firmware format for the BCM947xx boards. It's used by
-most of the vendors building devices based on Broadcom's BCM47xx SoCs and is
-supported by the CFE bootloader.
-
-Design of the TRX format is very minimalistic. Its header contains
-identification fields, CRC32 checksum and the locations of embedded partitions.
-Its purpose is to store a few partitions in a format that can be distributed as
-a standalone file and written in a flash memory.
-
-Container can hold up to 4 partitions. The first partition has to contain a
-device executable binary (e.g. a kernel) as it's what the CFE bootloader starts
-executing. Other partitions can be used for operating system purposes. This is
-useful for systems that keep kernel and rootfs separated.
-
-TRX doesn't enforce any strict partition boundaries or size limits. All
-partitions have to be less than the 4GiB max size limit.
-
-There are two existing/known TRX variants:
-1) v1 which contains 3 partitions
-2) v2 which contains 4 partitions
-
-There aren't separated compatible bindings for them as version can be trivialy
-detected by a software parsing TRX header.
-
-Required properties:
-- compatible : (required) must be "brcm,trx"
-
-Optional properties:
-
-- brcm,trx-magic: TRX magic, if it is different from the default magic
-		  0x30524448 as a u32.
-
-Example:
-
-flash@0 {
-	partitions {
-		compatible = "brcm,trx";
-	};
-};